Gravity - IO Shield - extension for FireBeetle M0 and ESP32-E - DFRobot DFR0762

Index: DFR-20375 EAN: 6959420920471
The extension provides a convenient connection between DFRobot Gravity sensors and FireBeetle 2.0 series. It offers the most commonly used ports, including digital, analog, I2C, UART, SPI and others. All pins are derived as female headers, so there is no need for additional soldering. IO Shield also features a power supply port with voltage range from 3.3V to 5.5V with PH2.0 connector, which makes it perfect for mobile projects.
Gravity - IO Shield - extension for FireBeetle M0 and ESP32-E - DFRobot DFR0762
€5.50
€4.47 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot

Product description: Gravity - IO Shield - extension for FireBeetle M0 and ESP32-E - DFRobot DFR0762

The extension provides a convenient connection between DFRobot Gravity sensors and the FireBeetle 2.0 series, offering the most commonly used ports including digital, analog, I2C, UART, SPI and more. All pins are derived as female headers, so there is no need for additional soldering. IO Shield has also a power supply port from 3.3V to 5.5V with PH2.0 connector, which makes it perfect for mobile projects.

Check also the user guide prepared by the manufacturer! You will find there description of particular pins and list of pins used by GDI interface.

Gravity - IO Shield - rozszerzenie do FireBeetle M0 i ESP32-E - DFRobot DFR0762.

Gravity - IO Shield - extension for FireBeetle M0 and ESP32-E - DFRobot DFR0762.

Intuicyjnie pogrupowane i czytelnie oznaczone wyprowadzenia zwiększają komfort pracy z Gravity - IO Shield.

Intuitively grouped and clearly labeled leads increase the comfort of working with Gravity - IO Shield.

Special features of IO Shield

  • Support for FireBeetle 2.0 series motherboards, including M0 and ESP32-E (does not work with the basic FireBeetle series)
  • Pin sequence support for Gravity series modules
  • Support for built-in SD card module
  • Support for GDI display interface
  • Possibility to connect external power supply
  • Equipped with Enable pin to turn off board power
  • No soldering required
  • Plug&Play
  • Pinouts grouped by colors

Technical specification Gravity - IO Shield

  • 12 digital ports
  • 5 analog ports
  • 3 I2C ports (in parallel)
  • 1 UART port
  • 1 SPI port
  • GDI display interface
  • Screw connector for external power supply
  • Board dimension: 60 x 25.4 mm
  • Mounting hole diameter: 2 mm
Rozszerzenia posiada także złącze śrubowe, za pomocą którego możliwe jest doprowadzenie zewnętrznego źródła zasilania w zakresie od 3,3 V do 5,5 V.

Extensions are also equipped with screw connector, which can be used to connect external power source in range of 3.3 V to 5.5 V.

Sensor - type Hub / nakładka
Package width 8 cm
Package height 6.5 cm
Package depth 2.5 cm
Package weight 0.023 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: