Product description: Fermion - transparent OLED 1.51 '' 128x56px SPI display with a converter - DFRobot DFR0934
A small OLED display from the Fermion series from DFRobot with a diagonal of 1.51 " and a resolution of 128 x 64 px . The monochrome display has a transparent background and displays the image in light blue color , making it suitable for new, interesting projects. The set includes a converter that allows you to connect the OLED screen with any microcontroller that supports communication via SPI or GDI Display based on the SSD1309 chip requires a 3.3 V power supply to work properly.
Example of OLED display connection using the SPI interface.OLED display outputs
The OLED display kit also includes a converter that allows you to connect via SPI to any microcontroller that supports this type of communication. The board has holes for self-soldering of the goldpin strip (included) with the following markings:
- DC - data / command selection.
- RES - system reset.
- CS - Chip Select.
- MOSI - SPI data line (Master Output Slave Input).
- SCLK - SPI clock line.
- GND - the ground of the system.
- VCC - power supply 3.3 V.
The main features of the OLED screen
- Transparent OLED display
- Full screen display
- High resolution
- Blue image
Application of the display
- Intelligent buildings
- DIY displays
- Interactive display of the stand
- 3D display
Monochrome, transparent OLED screen with blue characters, 1.51 "diagonal and 128 x 56 px resolution. 
Kit contents.OLED display specification
- Supply voltage: 3.3 V
- Viewing angle: full
- Chip: SSD1309
- Diagonal: 1.51 "
- Resolution: 128 x 56 px
- Converter interface: SPI or GDI
- Adapter dimensions: 18 x 28 mm
- Display area size: 35.05 x 15.32 mm
- Display color: blue
- Working temperature: -40 ° C to 70 ° C
- Pixel pitch: 0.274 x 0.274 mm
- Screen size: 42 x 27 mm
Kit contents
- 1x Fermion - 1.51 '' transparent OLED display 128x56px SPI
- 1x OLED Display Converter
- 1x goldpin strip 7-pin 2.54 mm pitch
- 1x 18-pin FPC cable, 0.5 mm pitch
