- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Raspberry Pi 5 GPIO extensions and HAT - Strona 5
Loading...
HSTX 22-pin raster 2,54 mm adapter for Raspberry Pi 5/IoT RedBoard RP2350 - SparkFun BOB-28467
The adapter allows you to easily connect peripherals to your Raspberry Pi 5 or RP2350 IoT RedBoard . It transfers signals from a 22-pin HSTX connector to standard 2.54mm...
Index: SPF-26598
Index: SPF-26598
Si5351A - 160MHz I2C signal generator - Adafruit 2045
The chip features a 25 MHz precision oscillator and PLL loops, which can generate signals from 8 kHz to 160 MHz. The chip works with voltages up to 3 V to 5.0 V, the Vpp value...
Index: ADA-04174
Index: ADA-04174
MCP23018-E/SP - 16-Bit I/O Expander with Open-Drain Outputs
The system allows to increase the number of pins (up to 16) of the microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06506
Index: UCC-06506
OnOff SHIM - on / off switch - overlay for Raspberry Pi
OnOff SHIM is a shield for the Raspberry Pi, mounted on the GPIO connectors. After disconnecting the power supply to the micro USB port on the shield, you can turn on and off...
Index: PIM-10633
Index: PIM-10633
UPS HAT for Raspberry Pi Zero - DFRobot DFR0528
A cap designed for the Raspberry Pi Zero , serving as an emergency power supply in the event of a mains power failure. The module is also compatible with other versions of...
Index: DFR-15714
Index: DFR-15714
Picade X HAT USB-C - games console for Raspberry Pi - Pimoroni PIM462
Overlay for Raspberry Pi created by Pimoroni. It allows you to create your own game console based on the popular minicomputer which is Raspberry Pi. It has been equipped...
Index: PIM-18909
Index: PIM-18909
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
16x2 RGB LCD display I2C KeyPad for Raspberry Pi 3B+/4B - DFRobot DFR0514
An overlay produced by DFRobot for Raspberry Pi 3B+ and 4B in the form of an LCD display. The screen displays characters in a two-line layout 16x2 . It presents subtitles in...
Index: DFR-19382
Index: DFR-19382
Camera equipped with IMX477 sensor in 1 / 2.3 "format and 12.3 MPx resolution. The module has an IR-CUT filter . The device is compatible with minicomputers Raspberry Pi 4B...
Index: ACM-20120
Index: ACM-20120
Maker Hat Base - HAT GPIO Extension for Raspberry Pi 400
The GPIO Maker Base HAT extension from Cytron, designed mainly to work with the Raspberry Pi 400 minicomputer, but can also be successfully used with other Raspberry Pi...
Index: CTN-20993
Index: CTN-20993
SparkFun Qwiic SHIM Kit - kit with display for Raspberry Pi - SparkFun KIT-16987
Starter kit from SparkFun prepared to extend the capabilities of the Raspberry Pi with Qwiic connectors. It consists of a shield for GPIO pins with a Qwiic connector,...
Index: SPF-21209
Index: SPF-21209
- Sale
Simply Servos Board - servo controller - 8 channels - for Raspberry Pi Pico - Kitronik 5339
Simply Servos Board is an overlay for the Raspberry Pi Pico, which allows you to control 8 servos at the same time. It is powered with the voltage ranging from 3 V to 12 V....
Index: KTR-21403
Index: KTR-21403
Module ProtoPi Plus - extension for Raspberry Pi 4/3/2/B + to breadboard + ribbon wire
The module provides easy connection of all GPIO leads of the Raspberry minicomputer, version 4, 3, 2 and B+ with any breadboard, no soldering needed.
Index: MOD-02607
Index: MOD-02607
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
Arduino Expansion Shield for Raspberry Pi 3B/2B/B+
Shield for Raspberry Pi with ATmega32u4 microcontroller known from Arduino Leonardo. Board allows you to combine the computing power of the Raspberry Pi with control functions...
Index: DFR-03909
Index: DFR-03909
PiUART - USB - USB-UART converter for Raspberry Pi - Adafruit 3589
Miniature shield for Raspberry Pi which is also a converter of USB-UART. Connected directly to GPIO pins. The module also has a power switch. It is compatible with Raspberry Pi...
Index: ADA-09816
Index: ADA-09816
Servo Bonnet - 16-channel PWM I2C driver for Raspberry Pi - Adafruit 3416
Overlay for Raspberry Pi to control 16 servos . The chip generates PWM signals up to 1.6 kHz with 12-bit precision. The board is designed to fit Raspberry Pi 2 x 20...
Index: ADA-11419
Index: ADA-11419
Explorer HAT Pro - prototype overlay for Raspberry Pi 4B/3B+/3B/2B
Shield for Raspberry Pi with breadboard, digital inputs and outputs, capacitive touch pads, colorful LEDs, analog inputs and motor controllers. Perfect for making small robots,...
Index: PIM-11467
Index: PIM-11467
TV HAT tuner DVB-T - module with decoder for Raspberry Pi 4B/3B+/3B/Zero
Shield for Raspberry Pi which consists to the tuner of the terrestrial television. It enables the reception of all available, uncoded channels of digital terrestrial...
Index: RPI-13066
Index: RPI-13066
Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.
Index: OST-14267
Index: OST-14267
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
Scroll HAT Mini - 17x7 LED matrix - HAT for Raspberry Pi - Pimoroni PIM491
A matrix consisting of 119 white LEDs in the form of an overlay for a Raspberry Pi minicomputer. The LEDs have been placed in a 17 x 7 arrangement and the brightness of each...
Index: PIM-19069
Index: PIM-19069
Air Quality Control - hat for Raspberry Pi - Kitronik 5038
Air Quality Control is another extension from Kitronik that allows you to expand the Raspberry Pi board and equips it with additional functionalities. The shield has pins...
Index: KTR-23157
Index: KTR-23157
PCIe Pipe 35mm flexible cable for NVMe Base and Raspberry Pi - Pimoroni PIM703
A flexible 35 mm ribbon cable enables convenient connection of the NVMe Base to the Raspberry Pi 5 . It is designed to run at PCIe Gen 3 speeds and also perfectly...
Index: PIM-24863
Index: PIM-24863