- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
SenseCAP M1 SD Card Replacement Kit - Seeedstudio 114992729
Index: SEE-22567
- Reduced price
- Promotion
- Reduced price
- Promotion
Raspberry Pi 5 GPIO extensions and HAT - Strona 11
Loading...
Expander Pi - pin header expander for Raspberry Pi - 16 pins I / O + 8 ADC + 2 DAC
Shield for Raspberry Pi adding 16 digital I/O pins, 8 analog inputs, 2 analog outputs and real time clock with battery connector. It connects via the I2C bus and SPI.
Index: ABE-11706
Index: ABE-11706
Servo PWM Pi Zero PCA9685 - 16-channel server controller for Raspberry Pi
Shield for Raspberry with 16-channel, 12-bit PWM controller for LED control, or analog servos based on system PCA9685. The output frequency is programmed in the range from 40...
Index: ABE-11718
Index: ABE-11718
Module with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be connected...
Index: PLL-11844
Index: PLL-11844
MAX14870 - dual-channel motor driver 28V/1,7A - extension for Raspberry Pi 4/3+/3/2/B+ - Pololu 3758
Module with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be connected...
Index: PLL-11845
Index: PLL-11845
TB9051FTG Hat two-channel driver for motors 28V / 2.6A - shield for Raspberry Pi - Pololu 2761
Module with dual-channel driver of motors TB9051FTG working with voltages from 4.5 V to 28 V and current up to 2,6 A per channel (max 5 A). The system can be connected directly...
Index: PLL-12433
Index: PLL-12433
Module with dual-channel driver of motors TB9051FTG working with voltages from 4.5 V to 28 V and current up to 2,6 A per channel (max 5 A). The system can be connected directly...
Index: PLL-12434
Index: PLL-12434
HiFiBerry DAC+ DSP - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with 4-channel amplifier Beocreate and the digital signal DSP processor. It is used in the device of the...
Index: RHF-13084
Index: RHF-13084
GPIO to FPC Breakout pHAT for Raspberry Pi
Trim wyprowadzajΔ ca 40-pin GPIO connector on the FPC so that you can connect sensors, wires, etc, with the Raspberry Pi Board. It allows also connection of the display...
Index: SUP-14228
Index: SUP-14228
PiJuice Zero - A Portable Power Platform for Raspberry Pi Zero
Portable power platform for Raspberry Pi Zero minicomputers. When connected to any power source, it acts as a wireless UPS . It uses intelligent power management...
Index: SUP-17486
Index: SUP-17486
Argon ONE M.2 SATA expansion board - for Raspberry Pi 4B
Argon One M.2 is an expansion board for Argon One cases. It allows you to run your Raspberry Pi using an M.2 SATA SSD , which provides faster boot up and more capacity . It...
Index: ARG-18766
Index: ARG-18766
16x2 RGB LCD display I2C KeyPad for Raspberry Pi 3B+/4B - DFRobot DFR0514
An overlay produced by DFRobot for Raspberry Pi 3B+ and 4B in the form of an LCD display. The screen displays characters in a two-line layout 16x2 . It presents subtitles in...
Index: DFR-19382
Index: DFR-19382
USB Hub Hat (B) - 4-port hub - overlay for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 20317
A USB hub in the form of an overlay for Raspberry Pi minicomputers, manufactured by Waveshare. The device is able to expand the number of ports on Raspberry Pi by 4 more in...
Index: WSR-20082
Index: WSR-20082
GNSS/GPS/BDS/QZSS L76B module for Raspberry Pi Pico - Waveshare 20072
Waveshare GNSS module to enable multiple GPS satellite systems using Raspberry Pi Pico module. The overlay for RPi Pico is based on L76B chip and supports satellite systems...
Index: WSR-20109
Index: WSR-20109
Environmental sensor - hat for Raspberry Pi - Waveshare 20471
An environmental sensor in the form of an overlay for Raspberry Pi equipped with a number of useful sensors. It has built-in temperature , humidity , air pressure, ambient...
Index: WSR-20550
Index: WSR-20550
Display HAT Mini - HAT with IPS LCD 2'' 320x240px for Raspberry Pi - PiMoroni PIM589
The Display HAT Mini from Pimoroni is a display overlay designed for any 40-pin version of the Raspberry Pi. The bright, 18-bit , 2" IPS display with a resolution of 320 x...
Index: PIM-20895
Index: PIM-20895
The Motoron M3H256 from Pololu is a three-channel driver for DC motors in the form of an overlay for Raspberry Pi minicomputers, version B + and newer. The supply voltage of...
Index: PLL-21621
Index: PLL-21621
Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - soldered - Pololu 5034
The Motoron M3H256 is a three-channel driver for DC motors manufactured by the Pololu company. Input voltage for powering DC motors should be in the range from 4.5 V to 48 V...
Index: PLL-21623
Index: PLL-21623
Uninterruptible power supply UPS - Power adapter for Raspberry Pi - 5 V - SB Components 24438
An emergency power supply for the Raspberry Pi to provide additional power in case of a power outage or when traveling. The power supply supports two Li-Ion batteries in the...
Index: SBC-21923
Index: SBC-21923
- EOL
- Promotion
The engine driver designed by Pololu is a module in the form of an overlay for Raspberry Pi minicomputers. The module has a 40-pin connector to which you can connect other...
Index: PLL-21979
Index: PLL-21979
The Motoron M2H24v14 motor driver is a module in the form of an overlay for Raspberry Pi minicomputers, designed by the Pololu company. The module is equipped with a...
Index: PLL-21980
Index: PLL-21980
Motoron M2H18v20 - a two-channel motor driver designed by Pololu in the form of an overlay for Raspberry Pi minicomputers. It is equipped with a 40-pin connector to which...
Index: PLL-21981
Index: PLL-21981
Two-channel Motoron M2H18v18 motor driver designed by Pololu in the form of an overlay for Raspberry Pi minicomputers. The module has a 40-pin connector to which you can...
Index: PLL-21982
Index: PLL-21982
Pineboards Hat AI! - Coral TPU PCIe M.2 E-key adapter for Raspberry Pi 5
Hat AI! is the perfect solution for users who want to leverage the artificial intelligence capabilities of Google Coral Edge TPU in their Raspberry Pi 5 -based projects....
Index: PIB-24730
Index: PIB-24730
Pineboards HatNET! 2.5G - Ethernet HAT for Raspberry Pi 5
HatNET! 2.5G is a network expansion board , designed to enhance the capabilities of the Raspberry Pi 5 with 2.5 Gigabit Ethernet connectivity. This module is dedicated to...
Index: PIB-24751
Index: PIB-24751
