- New
- New
Raspberry Pi 5 GPIO extensions and HAT - Strona 6
Loading...
Mini Kit 16-channel PWM I2C driver - Servo Hat for Raspberry Pi - Adafruit 2327
Shield for Raspberry Pi to control 16 servos. The system generates the PWM signal with frequency up to 1.6 kHz with 12 bit precision. Board is suitable for connectors of the...
Index: ADA-03283
Index: ADA-03283
Maker pHAT - GPIO extension for Raspberry Pi
PHAT shield for Raspberry Pi, it has signed GPIO pins to facilitate the recognition of individual pins, three programmable buttons, status LEDs for GPIO ports and active buzzer.
Index: CTN-13451
Index: CTN-13451
Dual channel CAN BUS Shield for Raspberry Pi - Seeedstudio 103990563
Seeedstudio shield for Raspberry Pi minicomputers. Supports CAN FD interface with transmission speed up to 8 Mb/s , it is a faster and more efficient version of the...
Index: SEE-17684
Index: SEE-17684
Servo pHAT - 16-channel PWM I2C driver for Raspberry Pi - SparkFun DEV-15316
The Servo pHAT overlay from SparkFun allows you to control up to 16 servos via an I2C interface. The chip generates PWM signals up to 1.6 kHz with 12-bit precision ....
Index: SPF-18725
Index: SPF-18725
IO pin expander - extension cap for Raspberry Pi 3 / 4 / 400
An expansion overlay for the Raspberry Pi in the form of an IO pin expander . It is compatible with Raspberry Pi version 3 / 4 and 400. On the board all the leads are...
Index: DFR-20073
Index: DFR-20073
SparkFun Qwiic pHAT v2.0 - hat for Raspberry Pi - SparkFun DEV-15945
SparkFun Qwiic pHAT v2.0 HAT shield for Raspberry Pi, manufactured by SparkFun. The pin expander improves the prototyping process by adding four connectors of the Qwiic...
Index: SPF-21165
Index: SPF-21165
PCF8575 - GPIO pin expander - I2C - STEMMA QT / Qwiic - Adafruit 5611
Adafruit pin expander equipped with PCF8575 chip. It has as many as 16 pins of GPIO inputs / outputs , thanks to which it increases the design possibilities of the modules...
Index: ADA-22192
Index: ADA-22192
MCP23017 - I2C 16-channel output expander
The system allows to increase the number of pins (up to 16 ) of the microcontroller (including minicomputer of Raspberry Pi). It communicates with the central unit via the I2C...
Index: UCC-02556
Index: UCC-02556
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.
Index: SEE-04451
Index: SEE-04451
Proto Board for Raspberry Pi Zero
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer in a version Zero.
Index: MSX-05794
Index: MSX-05794
MCP23008-E/P - 8-channel I2C pin expander
The system allows to increase the number of pins (up to 8) of a microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06505
Index: UCC-06505
ADC 16-bit converter - 4-channel ADS1115 - overlay for Raspberry Pi
Shield for Raspberry Pi with analog-digital converter of 16-bit accuracy and a small package MSOP-10. It has programmable data transfer speed from 8 to 860, 4 analog inputs and...
Index: MOD-09861
Index: MOD-09861
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Game HAT for Raspberry Pi - Waveshare 15154
Shield that allows you to create miniconsole for games based on minicomputer Raspberry Pi. The module is equipped with buttons, joystick, IPS 3,5" display, speaker and output...
Index: WSR-13589
Index: WSR-13589
Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484
Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
Index: PIM-15898
Index: PIM-15898
HiFiBerry DAC+ ADC Pro - sound card for Raspberry Pi 4B/3B+/3B
Sound card in the form of a 40-pin overlay for the Raspberry Pi minicomputer version 4B / 3B+ / 3B and above. Overlay powered directly from the minicomputer. It is equipped...
Index: RHF-16965
Index: RHF-16965
Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...
Index: PIM-16966
Index: PIM-16966
Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4 - Seeedstudio 102110497
Dual Gigabit Ethernet module is an expansion board with 2 Ethernet up to 1000 Mbit/s , 2 USB 3.0 ports and a number of peripherals such as CSI, DSI, microHDMI , FPC connector...
Index: SEE-19296
Index: SEE-19296
Display HAT Mini - HAT with IPS LCD 2'' 320x240px for Raspberry Pi - PiMoroni PIM589
The Display HAT Mini from Pimoroni is a display overlay designed for any 40-pin version of the Raspberry Pi. The bright, 18-bit , 2" IPS display with a resolution of 320 x...
Index: PIM-20895
Index: PIM-20895
A set containing elements that allow you to create a microscope based on a Raspberry Pi minicomputer. The kit includes a holder for a Raspberry Pi module with a screen and a...
Index: WSR-21714
Index: WSR-21714
Motor SHIM - motor controller for Raspberry Pi Pico - PiMoroni PIM617
The SHIM motor designed by Pimoroni is a driver for the Raspberry Pi Pico that allows you to control two motors . The board also has a utility button and STEMAM QT /...
Index: PIM-21836
Index: PIM-21836
PCIe Pipe 50mm flexible cable for NVMe Base and Raspberry Pi - Pimoroni PIM702
A flexible 50 mm long ribbon cable allows easy connection of NVMe Base with Raspberry Pi 5 . Designed for PCIe Gen 3 speeds, it also perfectly supports Gen 2 , making...
Index: PIM-24852
Index: PIM-24852
NVMe Base expansion board - for Raspberry Pi 5 - Pimoroni PIM699
Pimoroni NVMe Base is an expansion board with a PCIe connector for Raspberry Pi 5 , enabling the installation of very fast NVMe SSD drives. They ensure the smooth...
Index: PIM-24391
Index: PIM-24391
MCP4725 DAC I2C converter - SparkFun BOB-12918
Digital-to-analog converter with I2C interface. The module allows you to receive signal in the form of analog voltage from any microcontroller that has I2C. It is powered with...
Index: SPF-02275
Index: SPF-02275