Raspberry Pi 5 GPIO extensions and HAT - Strona 7
Loading...
Logic level converter 3,3V / 5V - I2C UART SPI
The module allows to exchange data between systems that use two popular voltages: 3.3 V and 5 V. It provides connection of interfaces: UART, SPI and I2C.
Index: MOD-01513
Index: MOD-01513
Module ProtoPi Plus - extension for Raspberry Pi 4/3/2/B + to breadboard + ribbon wire
The module provides easy connection of all GPIO leads of the Raspberry minicomputer, version 4, 3, 2 and B+ with any breadboard, no soldering needed.
Index: MOD-02607
Index: MOD-02607
Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....
Index: SPF-04290
Index: SPF-04290
4-channel logic level converter
The module allows to exchange data between systems that use the most popular levels of voltage: 5 V <-> 3.3 V and 3.3 V <-> 1,8 V. It works in both directions simulatneously....
Index: MSX-06117
Index: MSX-06117
Hub USB Hat - 4-port hub for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 12694
Hat for the Raspberry Pi that adds 4 USB ports and a converter USB-UART. The device has dimensions of 65 x 30 mm, it works with Raspberry Pi 4B/3B+/3B and Zero and Zero W.
Index: WSR-08870
Index: WSR-08870
E-paper of 2.13" 250x122px display (no module) for overlays for the Raspberry Pi - Waveshare 12672
The display of type of e-paper with a diagonal of 2.13 " and a resolution of 250 x 122 px. It is designed to use with shield for Raspberry Pi. It communicates via the SPI...
Index: WSR-09102
Index: WSR-09102
Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...
Index: PIM-10620
Index: PIM-10620
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
LTE GPS HAT - NB-IoT / LTE / GPRS / GPS SIM7000E - for Raspberry Pi 3B+/3B/2B/Zero - Waveshare 14865
Shield for Raspberry Pi that allows you to send text messages in the GSM network. It also has a GPS and LTE module. It communicates via serial interface UART (RX, TX) using the...
Index: WSR-12531
Index: WSR-12531
MAX98357A decoder stereo DAC I2S - SparkFun DEV-14809
The stereo decoder's module DAC to communicate through the I2S interface. Built-in class D amplifier can provide up to 3.2 W of power to the speakers or headphones with...
Index: SPF-13062
Index: SPF-13062
Game HAT for Raspberry Pi - Waveshare 15154
Shield that allows you to create miniconsole for games based on minicomputer Raspberry Pi. The module is equipped with buttons, joystick, IPS 3,5" display, speaker and output...
Index: WSR-13589
Index: WSR-13589
Overlay for Raspberry Pi equipped with BME280 temperature, pressure and humidity sensor, LTR-559 light and proximity sensor, MICS6814 analog gas sensor, ADC ADS1015...
Index: PIM-17074
Index: PIM-17074
- Discontinued product
Scroll HAT Mini - 17x7 LED matrix - HAT for Raspberry Pi - Pimoroni PIM491
A matrix consisting of 119 white LEDs in the form of an overlay for a Raspberry Pi minicomputer. The LEDs have been placed in a 17 x 7 arrangement and the brightness of each...
Index: PIM-19069
Index: PIM-19069
Raspberry Pi PoE+ HAT - Power over Ethernet for Raspberry Pi 4B/3B+ - SC1022
Cap designed for Raspberry Pi 3B+ and 4B versions which are equipped with 4-pin PoE connector. It allows simultaneous communication with LAN and powering the minicomputer...
Index: RPI-19537
Index: RPI-19537
Power over Ethernet HAT (D) is an overlay module designed for Raspberry Pi minicomputer 3B+ and 4B versions. Small size and specially designed construction allows to use it also...
Index: WSR-19593
Index: WSR-19593
SparkFun Qwiic pHAT v2.0 - hat for Raspberry Pi - SparkFun DEV-15945
SparkFun Qwiic pHAT v2.0 HAT shield for Raspberry Pi, manufactured by SparkFun. The pin expander improves the prototyping process by adding four connectors of the Qwiic...
Index: SPF-21165
Index: SPF-21165
Raspberry Pi SSD Kit 256GB for Raspberry Pi 5
The Raspberry Pi SSD Kit consists of a Raspberry Pi M.2 HAT+ and an official 256 GB Raspberry Pi SSD NVMe drive . The SSD Kit is the perfect solution for Raspberry Pi 5...
Index: RPI-25485
Index: RPI-25485
The PoE M.2 HAT+ from Waveshare is an advanced adapter for the Raspberry Pi 5 that combines the functions of a PCIe adapter for NVMe M.2 SSDs and Power over Ethernet . The...
Index: WSR-28621
Index: WSR-28621
ReSpeaker Mic Array v2.0 by Seeed is another more extended version of ReSpeaker Mic Array v1. The board with built-in long-range microphone, capable of detecting voices at a...
Index: SEE-14133
Index: SEE-14133
SIM8262E-M2 5G HAT - GNSS/GPS 5G/4G/3G overlay + case for Raspberry Pi - Waveshare 23254
SIM8262E-M2 5G HAT is an expansion module for Raspberry Pi that allows you to connect the device to a 5G network . The overlay is compatible with Windows, Linux and Android...
Index: WSR-22794
Index: WSR-22794