Raspberry Pi 5 GPIO extensions and HAT - Strona 8
RGB LED Hat for Raspberry Pi 3/2/Zero - Waveshare 12725
Shield for the Raspberry Pi containing the LED matrix 8 x 4 consisting of WS2812B LEDs. Each LED can be individually set. The device has dimensions of 65 x 30 mm, it works with...ADC Differential Pi - MCP3424 - 8-channel A/D converter
Module with high precision A/C converter in the form of shields for GPIO connectors of Raspberry Pi. It has 8 18-bit channels, analog outputs operating in Differential mode...Stepper Motor HAT - 2 channels - 28V/2,5A for Raspberry Pi - Waveshare 15669
Shield for Rasberry Pi is equipped with a system DRV8825, it allows you to control two stepper motors with a resolution of steps of up to 1/32. It works with motors with a...Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...HRB8825 2-channel stepper motor driver 28V/2,5A - HAT For Raspberry Pi - Waveshare 22311
Two-channel stepper motor driver from Waveshare, in the form of a HAT shield for the Raspberry Pi. The controller is based on two HR8825 systems, it works with a voltage from...MSX RTC DS1307 I2C - real time clock
Module with real time clock and backup battery (battery included). It allows you to read the time in hours, minutes, and seconds, date: month, day, year. The communication...Motor Shield 2x L293D 24V/1A - 4-channel motor controller for Raspberry Pi
Shield allows to control the four DC motors (DC) or two stepper motors. Board designed for Raspberry Pi 4 B, 3 B and 2 B. It has two H bridges in the form of chip L293D .OnOff SHIM - on / off switch - overlay for Raspberry Pi
OnOff SHIM is a shield for the Raspberry Pi, mounted on the GPIO connectors. After disconnecting the power supply to the micro USB port on the shield, you can turn on and off...Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.ADC Pi MCP3424 - 8-channel A/D converter
Module with high precision A/C converter in the form of shields for GPIO connectors of Raspberry Pi. It has 8 17-bit channels, analog outputs operating in mode Single Ended...