- New
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
3D printer - Anycubic Kobra S1 Max Combo
350 x 350 x 350 mm build volume and a 65 °C heated chamber: the Kobra S1 Max Combo prints large models in 4 colors thanks to the ACE 2 Pro included in the set.
- 350 °C hotend for ABS, ASA, PC and carbon fiber nylon
- ACE 2 Pro dries filament at up to 65 °C, expandable to 16 colors
- Up to 600 mm/s, 720p AI camera and LeviQ 3.0 leveling
We could not load the price.
The promotional price does not combine with quantity discounts.
Kobra S1 Max Combo: 350 mm on every axis and four colors with filament drying
Anycubic Kobra S1 Max Combo is an enclosed CoreXY 3D printer with a 350 x 350 x 350 mm build volume, 2.74 times larger than the Kobra S1, and the ACE 2 Pro 4-color system. The hotend heats up to 350 °C, the bed to 120 °C and the chamber actively to 65 °C, so besides PLA and PETG you can print engineering materials, meaning plastics more resistant to heat and impact, such as ABS, ASA, PC and carbon fiber nylon.
The printer arrives 95% assembled, and the manufacturer states that you can start your first print about 10 minutes after unpacking.
Kobra S1 Max with the ACE 2 Pro system and four filament spools
350 x 350 x 350 mm
build volume (Kobra S1: 250 x 250 x 250 mm)
600 mm/s
max. print speed, recommended 300 mm/s
350 °C / 65 °C
max. hotend and chamber temperature
4 colors
with ACE 2 Pro included, up to 16 after expansion
What sets this model apart
A 65 °C heated chamber and 350 mm on every axis in one printer
The Kobra S1 Max combines a 350 x 350 x 350 mm build volume with active chamber heating up to 65 °C, which the manufacturer intends for engineering materials such as ABS, ASA, PC and PA. Keep in mind that the printer, measuring 502.7 x 483 x 584 mm, weighs 25.7 kg, so it needs a stable surface, and if space is limited, the Kobra S1 Combo will be a better choice.
2.74 times
larger print volume than the Kobra S1 Combo
350 °C
max. hotend temperature (Kobra S1 Combo: 320 °C)
65 °C
filament drying in the ACE 2 Pro (ACE Pro with the Kobra S1: 55 °C)
A large multicolor figurine printed in the Kobra S1 Max chamber
Large models in one piece instead of gluing parts together
The 350 x 350 x 350 mm build volume fits large figurines, device enclosures, helmets and model parts that on a printer with a 250 mm build volume have to be split into pieces and glued together. The CoreXY design prints at a recommended speed of 300 mm/s, up to 600 mm/s, with acceleration up to 20,000 mm/s².
- LeviQ 3.0 automatic bed leveling before printing
- Flexible spring steel plate with a PEI coating, from which you remove the print by flexing the plate
- Flow calibration and Pressure Advance, meaning compensation for pressure in the nozzle, for even edges
- Print resume after a power outage and filament runout and tangle detection
Anycubic Kobra S1 Max Combo in action
Official presentation of the Kobra S1 Max Combo printer with the ACE 2 Pro system.
Video: the manufacturer's official YouTube channel.
Botland is an official distributor of Anycubic 3D printers in Poland. Buying from us guarantees original equipment and fast technical support. We also run a professional service for these devices and sell original spare parts.
350 °C hotend, 120 °C bed and 65 °C chamber for engineering materials
The factory-installed 0.4 mm nozzle is made of hardened steel, and a spare 0.6 mm nozzle is included. The manufacturer states that such a nozzle lasts 6 times longer than a brass one, which matters with carbon fiber and glass fiber filaments that wear down the nozzle. A short feed path with hardened gears and a titanium hotend heat break reduce the risk of nozzle clogs.
- Basic materials: PLA, PETG, TPU 95A, PET, PLA-CF, PETG-CF and PVA
- Engineering materials: ABS, ASA, PC, PA, PA6-CF, PC-CF/GF and PET-CF
- A PTC heater and two fans in the rear duct distribute heat in the chamber
- The chamber has an activated carbon insert that absorbs print odors
Kobra S1 Max chamber with the print head and heated bed
Kobra S1 Max with four ACE 2 Pro units for 16-color printing
Four colors included, up to 16 after expansion
The ACE 2 Pro system feeds up to four filaments and switches them automatically during printing. It also dries filament at up to 65 °C and shows the temperature and humidity in the spool compartment, while the sealed spool compartment protects the filament from moisture.
- A filament change takes about 56 s, and the feed speed is 50 mm/s
- Four independent brushless motors, one for each spool
- Detection of the amount of filament remaining on the spool
- Up to 16 colors with four ACE 2 Pro units and additional filament splitters
From the box to your first print
You operate the printer from the touchscreen, from the Anycubic app or directly from a model slicing program, known as a slicer, which turns a 3D model into print head movement paths. The manufacturer recommends Anycubic Slicer Next and OrcaSlicer.
- 4.3-inch touchscreen with a menu in 10 languages, including English
- 720p camera that uses AI to detect a failed print and records a timelapse in the app
- Dual-band 2.4 and 5 GHz WiFi, an Ethernet port and a LAN mode for working on a local network
- Printing from a USB flash drive when the printer has no network access
Preparing the Kobra S1 Max for its first start-up
Is it a good choice for you?
A good choice if:
- you print large models that would have to be split into parts and glued together on a 250 mm build volume
- you want to print in several colors without painting and manual filament changes
- you plan to print in ABS, ASA, PC or carbon fiber nylon
Consider another option if:
- 250 mm is enough and you want a smaller printer: choose the Anycubic Kobra S1 Combo
Kobra S1 Max Combo or Kobra S1 Combo
| Kobra S1 Max Combo | Kobra S1 Combo | |
|---|---|---|
| Build volume | 350 x 350 x 350 mm | 250 x 250 x 250 mm |
| Max. hotend temperature | 350 °C | 320 °C |
| Actively heated chamber | yes, up to 65 °C | no |
| Color system included | ACE 2 Pro, drying up to 65 °C | ACE Pro, drying up to 55 °C |
| Max. number of colors | 4 (16 with additional ACE 2 Pro units) | 4 (8 with an additional ACE Pro) |
| Camera | 720p | 480p |
| Max. print speed | 600 mm/s | 600 mm/s |
| Max. bed temperature | 120 °C | 120 °C |
| Noise in standard mode | up to 48 dB (55 dB with chamber heating) | up to 46 dB |
| Printer weight | 25.7 kg | 18 kg |
| See | this page | Kobra S1 Combo |
Fun fact
Chamber heating does not always help
The Kobra S1 Max chamber is heated by a PTC heater, and two fans in the rear duct distribute the warm air. However, the manufacturer recommends not turning on heating with PLA, PETG and TPU, because in a warm chamber these filaments can soften, get stuck in the extruder and clog it.
Frequently asked questions
How many colors can I print with the Combo set?
The set includes one ACE 2 Pro unit, which supports 4 colors. After buying additional units and filament splitters, you can print up to 16 colors with four ACE 2 Pro units.
Can I connect the ACE Pro from my Kobra S1?
No. The Kobra S1 Max works only with the ACE 2 Pro. Components shared with the Kobra S1 series include, for example, the 4-in-1 filament splitter and the filament runout and jam detection module.
Do I need to turn on chamber heating with PLA?
No. The manufacturer recommends not turning on chamber heating with PLA, PETG and TPU. The heated chamber is intended for engineering materials such as ABS, ASA, PC and PA.
What are the dimensions and weight of the Kobra S1 Max Combo?
The printer, measuring 502.7 x 483 x 584 mm, weighs about 25.7 kg, and the ACE 2 Pro, measuring 368 x 291.5 x 236.5 mm, weighs about 3.7 kg. The package with the Combo set, measuring 583 x 560 x 693 mm, weighs 35 kg.
Which nozzles fit the Kobra S1 Max?
A 0.4 mm hardened steel nozzle is installed at the factory, and a spare 0.6 mm nozzle is included. The manufacturer also offers a 0.8 mm hardened steel nozzle and a 0.25 mm brass nozzle for fine details.
Does the printer work without the internet?
Yes. You can print from a USB flash drive or in LAN mode, in which the printer connects to a computer on the local network. The Ethernet port is used for a wired connection.
Package contents
- 1 x Anycubic Kobra S1 Max 3D printer
- 1 x ACE 2 Pro color system
- 1 x Spool holder with mounting parts
- 1 x Signal cable
- 4 x PTFE tube
- 2 x Power cable
- 1 x Filament return detection module with 4-in-1 splitter
- 2 x M4 x 16 screws
- 2 x M2.5 x 25 screws
- 2 x Cable clip
- 1 x Hex keys 2.5 / 2 / 1.5 mm
- Filament samples
- 1 x Nozzle cleaning needle
- 1 x Grease
- 1 x 0.6 mm hardened steel nozzle
- 1 x Nozzle cleaning module
- 1 x Nozzle parking pad
- 1 x Activated carbon insert
- 1 x User manual
Full filament spools are not included, only samples.
Technical specifications
| Parameter | Value |
|---|---|
| Type | FDM 3D printer, CoreXY design, enclosed housing |
| Build volume | 350 x 350 x 350 mm |
| Print speed | recommended 300 mm/s, max. 600 mm/s |
| Acceleration | recommended 10,000 mm/s², max. 20,000 mm/s² |
| Layer height | 0.08-0.28 mm |
| Positioning accuracy X / Y / Z | 0.0125 / 0.0125 / 0.0008 mm |
| Nozzle | 0.4 mm, hardened steel (spare 0.6 mm included) |
| Max. nozzle temperature | 350 °C |
| Bed | spring steel plate with PEI, max. 120 °C |
| Chamber | active heating up to 65 °C, activated carbon filter |
| Leveling | automatic LeviQ 3.0 |
| Supported materials | PLA, PETG, TPU 95A, PET, PLA-CF, PETG-CF, PVA, ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, PET-CF |
| Color system | ACE 2 Pro: 4 colors, drying up to 65 °C, max. 16 colors with 4 units |
| Camera | 720p, AI failed print detection, timelapse |
| Display | 4.3-inch touchscreen, 10 languages, including English |
| Connectivity | WiFi 2.4 / 5 GHz, Ethernet, LAN mode, USB flash drive |
| Software | Anycubic Slicer Next, OrcaSlicer, Anycubic app |
| File formats | STL, OBJ, 3MF (input), G-code (output) |
| Power supply | 110 V / 220 V, rated power 1000 W / 2200 W |
| ACE 2 Pro power | 330 W (220 V) |
| Noise | up to 48 dB, up to 45 dB in quiet mode, up to 55 dB with chamber heating |
| Printer dimensions | 502.7 x 483 x 584 mm |
| Printer weight | approx. 25.7 kg |
| ACE 2 Pro dimensions | 368 x 291.5 x 236.5 mm |
| ACE 2 Pro weight | approx. 3.7 kg |
| Package dimensions and weight | 583 x 560 x 693 mm, 35 kg |
Useful links
| Name | Value |
|---|---|
| 3D - print surface | 350x350x350 mm |
| 3D - type of printout | FFF/FDM |
| 3D - hotend amount | 1 |
| 3D - filament diameter | 1.75 mm |
| 3D - printing speed | 600 mm/s |
| 3D - nozzle temp | 350 °C |
| 3D - table temp. | 120 °C |
| Pole robocze | Big |
| Wymiary pola roboczego - oś X | 350 mm |
| Wymiary pola roboczego - oś Y | 350 mm |
| Wymiary pola roboczego - oś Z | 350 mm |
| Plug&Play | Yes |
| 3D - Heated chamber | Yes |
| 3D - Camera | Yes |
| 3D - Multi-material support | Yes |
| 3D - Supported Materials | Advanced |
| 3D - Communication |
|
| Filament included | Sample |
| Width | 58 cm |
| Height | 68 cm |
| Depth | 55 cm |
| Weight | 35 kg |
GLS
Shipping in 24 hours
from €8.07
Raben - pallet delivery
Delivery in 3–5 days, no inside delivery
from €96.75
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Products from the same category
See all
