Filament Devil Design PETG 1,75mm 1kg - Bright green transparent
Index: DEV-15242
- Reduced price
- Promotion
- Reduced price
- Promotion
SparkFun WVR Audio Development Board - ESP32 - SparkFun DEV-21307
Index: SPF-23305
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
SENSORS - Strona 12
Loading...
LPS25HB - pressure and altitude sensor 126kPa I2C / SPI 2.5-5.5V - Pololu 2867
Sensor for measuring a pressure in the range from 26 kPa to 126 kPa with a accuracy at the level of ± 0,02 kPa. The measurement result can be easily converted to a height....
Index: PLL-12988
Index: PLL-12988
Grove - set of 5 female-female 4-pin - 2mm/30cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Cable length is 30 cm. Version with a latch.
Index: SEE-04398
Index: SEE-04398
Non-contact Capacitive Liquid Level Sensor - DFRobot SEN0368
Non-contact capacitive liquid level sensor with status indicator and adjustable sensitivity . This product can be used to detect liquids in non-metallic containers or pipes...
Index: DFR-19247
Index: DFR-19247
DFRobot Gravity - vibration sensor with piezoelectric membrane
Analog vibration sensor with piezoelectric membrane. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04713
Index: DFR-04713
Triple Axis Accelerometer Breakout - LIS3DH - SparkFun SEN-13963
Sensor LIS3DH is a 3-axis digital accelerometer. It allows you to measure acceleration in the configurable ranges. It communicates via the I2C or SPI bus, it is powered from a...
Index: SPF-08064
Index: SPF-08064
Spy Camera HD 5MPx Flex - a spy camera with a flexible cable for Raspberry Pi
Module with the camera connected to a special connector of the minicomputer Raspberry Pi, version 3, 2, B+, A+ and older A and B. The device has a sensor OV5647 with a matrix...
Index: ODS-06559
Index: ODS-06559
QTR-8RC reflectance sensor array - digital - Pololu 961
Strap with eight reflective sensors with digital output. It is powered with the voltage of 5 V or 3.3 V.
Index: PLL-00020
Index: PLL-00020
Tensometric beam NA1 20kg (200N) - 0,5m
Strain gauge beam operating within the range up to 20 kg, (approx. 200 N). Used e.g. for kitchen scales, portable scales. The connection cable is terminated with terminals with...
Index: SES-03522
Index: SES-03522
Inductive proximity sensor LJ18A3-8-Z / AX 8mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 8 mm. The object detection is...
Index: DNG-11867
Index: DNG-11867
DFRobot Gravity - capacitive touch sensor
Capacitive touch sensor uses a digital interface to work. It can be powered with the voltage from 3.3 V to 5 V. It feels the human or metak touch, even through a fabric or paper.
Index: DFR-11264
Index: DFR-11264
SPW2430 - module with MEMS microphone - Adafruit 2716
Module with silicon microphone, MEMS type, which does not require amplifier. It detects sound with frequency from 100 Hz to 10 kHz and converts it into an analog output signal...
Index: ADA-04968
Index: ADA-04968
Load Sensor Combinator (Ver. 1.1) - SparkFun BOB-13878
The module allows you to connect 4 load sensors - strain-gauge beams to one of the bridge via 4-wire cable. It finds application, for example, in the construction of the...
Index: SPF-07277
Index: SPF-07277
Antclabs BLTouch v3.1 - auto bed leveling sensor for 3D printers
BLTouch is a type of semiconductor Hall sensor . It is used in 3D printers as an auto-leveling sensor to accurately measure the inclination of the work table surface. It can be...
Index: ANS-19531
Index: ANS-19531
Tensometric beam NA27 10kg (100N)
Strain-gauge beam operating in the range of up to 10 kg (100 N approx.). It is applied, for example, for kitchen scales, portable scales. The connecting cable has tips with the...
Index: SES-09074
Index: SES-09074
Grove - 10kΩ rotary potentiometer linear lower connector
Potentiometer 10 kOhm with linear rotary. It has a 300° range of rotation. It has a 4-pin Grove connector on the other side of the handle. The kit includes a cable adapted...
Index: SEE-04430
Index: SEE-04430
Grove - temperature and humidity sensor DHT11 - Seeedstudio 101020011
The sensor of temperature and humidity DHT11 from the Grove series. The output is a digital signal. The temperature measurement range is from 0 °C to 50 °C and...
Index: SEE-12378
Index: SEE-12378
Photocell - IR beam interruption sensors
The kit includes: the transmitter and receiver of infrared radiation. Together they create an invisible barrier, which when crossed by a person, an animal or a vehicle, will...
Index: LED-05369
Index: LED-05369
Module with digital barometer with the range from 50 to 110 kPa, it allows to measure altitude with an accuracy of 30 cm, and temperature with a built-in sensor. It is supplied...
Index: SPF-02129
Index: SPF-02129
- Reduced price
- Promotion
ArduCam OV7675 0,3MPx 640x480px - camera module
The camera module with the matrix OV7675 0,3 MPx with a resolution of 640x 480 px and a speed of up to 60 frames per second. The device has the lens of 1/9", it communicates...
Index: ACM-06840
Index: ACM-06840
Capacitive touch sensor based on the module TTP223-b is supplied with the voltage from 2 V to 5.5 V, the output is a digital signal.
Index: SEE-04431
Index: SEE-04431
IR beam interruption sensor - LED 3mm - 0-200cm
A motion sensor that detects the interruption of the infrared light beam transmitted between the transmitter and the receiver . The detection range is 0 cm to 200 cm ....
Index: DNG-18692
Index: DNG-18692
Grove - Cable Pigtail - 4-pin connection cable - 10cm - Adafruit 5244
Connection cable from Adafruit. On one side it has four isolated wires (each in a different color), and on the other side it has a connector compatible with the Grove...
Index: ADA-21063
Index: ADA-21063
Gravity - Analog Waterproof Capacitive Soil Moisture Sensor V2.0 - DFRobot SEN0308
The device is designed to measure soil moisture by means of capacitive detection. DFRobot product has increased water resistance . It can be placed in the soil for a long...
Index: DFR-17377
Index: DFR-17377
Contact reed switch straight 35,5mm
Contact reed in the simple case with the length of 35.5 mm.
Index: SES-03262
Index: SES-03262