- New
- EOL
- New
Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, cold white - 5m
Index: LED-07079
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
SENSORS - Strona 21
Loading...
Dust / air quality sensor PM1.0 / PM2.5 / PM10 - 5V UART - PlanTower PMSA003-A
Dust sensor module that allows you to measure the degree of air purity. Enables precise analysis of the pollution in the environment, measures the concentration of PM1.0 /...
Index: PLA-17769
Index: PLA-17769
Inductive proximity sensor LJ18A3-8-Z / CY 8mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 8 mm. The object...
Index: DNG-11870
Index: DNG-11870
DFRobot Gravity - 2x16 I2C LCD display - black with RGB backlight
LCD display 2x16 characters with black backlight, it can display the font in any colour from the RGB palette. Communicates with two-wire I2C bus. The kit includes a cable...
Index: DFR-12360
Index: DFR-12360
LSM6DSO - 3-axis accelerometer and I2C/SPI gyroscope - SparkFun SEN-18020
PCB with 6DoF LSM6DSO chip containing accelerometer and gyroscope along with 9 kB FIFO buffer and embedded processing interrupt functions. The device can detect shock, roll,...
Index: SPF-19708
Index: SPF-19708
Temperature, humidity, pressure and gas sensor - BME688 - SPI/I2C - STEMMA QT/Qwiic - Adafruit 5046
Multifunctional sensor that combines sensors for temperature, humidity, pressure and VOC gas. It has an embedded Bosch BME688 chip. Manufactured by Adafruit, it uses SPI and...
Index: ADA-19788
Index: ADA-19788
Grove - LS06-S ambient light sensor v1.1
Module from the Grove series is equipped with a sensor LS06-S. The s ensor allows to determine the intensity of the light and reflects the analog voltage signal back to...
Index: SEE-13335
Index: SEE-13335
DS18B20 temperature sensor + wire - Iduino SE029
Module with digital temperature sensor DS18B20. The measuring range is from -55°C to 125°C, supply voltage is 5 V. The board has a 3-pin connector ,compatible cable is...
Index: OST-14252
Index: OST-14252
Gravity - pH analog sensor/meter V2 - DFRobot SEN0161-V2
pH sensor / meter with analogue output. Allows to test the level of acidity and alkalinity of aqueous solutions . It has an accuracy of +/- 0.1 pH, which is sufficient for...
Index: DFR-15094
Index: DFR-15094
Grove - 12-bit Magnetic Rotary Position Sensor / Encoder (AS5600)
The module is equipped with AS5600 magnetic encoder with 12-bit resolution. It has greater accuracy, is non-contact and has no angle limitation, unlike a traditional...
Index: SEE-15546
Index: SEE-15546
A product of Adafruit company in a form of UV light sensor equipped with LTR390 chip. The measurement range for ALS is from 500 nm to 600 nm, and for UVA from 300 nm to...
Index: ADA-19004
Index: ADA-19004
SPDT E3JK-R4M1 90-250VAC photoelectric sensor IP65 NC / NO - 4m
Photoelectric transmitting sensor. It detects the objects by the method of reflection. Detection range is up to 4 meters. It has Light-ON operation mode. It is powered with the...
Index: AKS-11835
Index: AKS-11835
3-axis magnetometer - MMC5603 - STEMMA QT / Qwiic - Adafruit 5579
The Magnetometer from Adafruit is equipped with the MMC5603 system - monolithic, integrated 3-axis AMR magnetic sensor. It is characterized by high sensitivity and has a...
Index: ADA-21911
Index: ADA-21911
Ultraviolet UV light sensor - analog module - Waveshare 9537
The ultraviolet sensor powered with the voltage from 3.3 V to 5 V. The output is an analog voltage, proportional to the intensity of UV light. The sensor can be used to detect...
Index: WSR-04934
Index: WSR-04934
High temperatura probe PT100 - 7x50mm
Waterproof analogue sensor with the high temperature working in the range from -200 °C to 420 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07468
Index: SES-07468
Radiation meter for the detection of γ-, β- and X-ray radiation - Joy-it JT-RAD01
A Geiger counter allows you to detect gamma, beta and X-ray radiation in the environment around us. It is characterized by exceptionally simple operation, high measurement...
Index: SEG-23552
Index: SEG-23552
Grove ESP8285 V2 - WiFi UART module
Grove Wi-Fi module based on a ESP8285 system with built-in TCP/IP and support AT commands. It supports the most popular protection, such as WEP, WPA/WPA2, TKIP, AES and WAPI....
Index: SEE-13241
Index: SEE-13241
Digital temperature and humidity sensor - SHT45 - STEMMA QT / Qwiic - Adafruit 5665
High precision , digital temperature and humidity sensor manufactured by Adafruit . It has a built-in Sensirion SHT45 system that measures temperature in the range...
Index: ADA-22541
Index: ADA-22541
DFRobot Gravity - analog ph Pro sensor/meter
The analog pH meter is compatible with Arduino. It has an accuracy of +/- 0.1 pH which is sufficient in most cases. The Pro version has the industrial probe that can be...
Index: DFR-06112
Index: DFR-06112
DFRobot Gravity - 12-position rotary switch V1
The module is equipped with 12-state rotary switch. It is powered with the voltage from 3.3 V to 12 V. The switch uses analog input for reading the output status, which allows...
Index: DFR-11256
Index: DFR-11256
Inductive proximity sensor LJ12A3-2-Z / CY 2mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mm. The object...
Index: DNG-11871
Index: DNG-11871
Grove - module cover 1x1 blue - 4pcs.
Shield for the modules from Grove series in blue color with size of 25 x 25 x 13 mm. It is also compatible with Lego and Makeblock. It allows you to mount a small Grove module....
Index: SEE-13339
Index: SEE-13339
Module with vibration sensor 801S - regulated
A very sensitive vibration / pulse sensor 801S based on the LM393 system. It has a built-in potentiometer to adjust the sensitivity. It has analog output and the TTL signal. It...
Index: OST-14289
Index: OST-14289
Inductive proximity sensor LJ18A3-5-Z / BY 5mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 5 mm. The object detection...
Index: DNG-11869
Index: DNG-11869
Qwiic Scale - NAU7802 module for tensometric beam - SparkFun SEN-15242
The module is based on a NAU7802 system enabling the reading of data from a strain-gauge beams. By connecting the model to the microcontroller, you can read the change in...
Index: SPF-14405
Index: SPF-14405