Product Description: Pico Air WiFi Monitoring Expansion Board - for Raspberry Pi Pico - SB Components SKU22342
Expansion board produced by SB Components , which allows you to create an application with WiFi communication to monitor air quality . It includes a high-quality PMSA003 air quality sensor, an ESP8266 chip for wireless WiFi communication and a Bosch BME280 sensor for measuring temperature, humidity and pressure. In addition, the board also has an OLED display with a diagonal of 0.91'' , which presents read information about suspended solid particles (PM1.0, PM2.5, PM10) in the air.
The product is compatible with the Raspberry Pi Pico!
Before working with the overlay, check the user's guide prepared by the manufacturer.
The subject of the sale is the Pico Air WiFi Monitoring Expansion board. Raspberry Pi Pico must be purchased separately.
Equipped with a socket that allows you to conveniently plug in the Raspberry Pi Pico.
Special features of the module
- It has a built-in PMSA003 air quality sensor and a BME280 temperature, humidity and pressure sensor
- The working voltage is 5V
- It has a built-in 0.91" OLED display
- Compatible with Raspberry Pi Pico , equipped with a slot for convenient plugging of the module
Technical specification of the Pico Air WiFi Monitoring Expansion module
- Type: expansion board
- Purpose: for Raspberry Pi Pico
- Air quality sensor: PMSA003
- Measuring range: 0.3 µm to 1.0 µm; from 1.0 µm to 2.5 µm; from 2.5 µm to 10 µm
- Particle counting efficiency: 50% at 0.3 μm; 98% at >= 0.5 μm
- Response time: <= 10 seconds
- Temperature, humidity and pressure sensor: BME280
- Temperature measurement range: -40°C to 85°C (resolution 0.01°C, accuracy ± 1°C)
- Humidity measurement range: 0% to 100% RH (resolution 0.008% RH, accuracy ± 3% RH)
- Pressure measurement range: 300 hPa to 1100 hPa (resolution 0.18 Pa, accuracy ±1 hPa)
- Built-in communication module: ESP8266
- Speed: 115200 bps
- Protocol: IEEE 802.11b/g/n
- Frequency band: 2400 MHz to 2483.5 MHz
- Operating modes: WiFi STA, WiFi AP, WiFi STA+AP
- PCB antenna: built-in
- Wireless communication type: WiFi
- Communication interface: UART
- Display: OLED
- diagonal: 0.91"
- Supply voltage: 5V DC
- Board dimensions: 91 x 68 mm
Kit contents
- Pico Air WiFi Monitoring Expansion Board - for Raspberry Pi Pico - SB Components SKU22342 - 1 piece
Pico Air WiFi Monitoring Expansion Board - for Raspberry Pi Pico - SB Components SKU22342.
