SENSORS - Strona 39
TSL2591 - High Dynamic Range Digital Light Sensor - STEMMA QT/Qwiic - Adafruit01980
Digital light intensity sensor with TSL2591 from Adafruit. It enables detection of light intensity with a sensitivity of up to 188 ulx in the range up to 88000 lx . It has...Sensor for measuring heart activity - AD8232 - SparkFun SEN-12650
Module for measuring electrical activity of the human heart. The output is an analog signal which can be saved as EKG. The sensor is easy to operate, the manufacturer provides...Liquid level magnetic sensor CMW115
Durable, high quality float sensor, measures liquid levels. It is used where control of liquid measurement is needed all the time. The sensor is mounted o float with a...DFRobot TCS34725 RGB Color Sensor For Arduino
A module that allows you to make the function to determine the color of ambient light. Applied sensor TCS34725 with a LED backlight and a built-in IR filter. It communicates...DFRobot Gravity – Lightning Sensor
The module is equipped with the AMS AS3935 Franklin system and a special antenna Coilcraft MA5532-AE for determining the distance from atmospheric discharges, intensity and...Anemometer / anemometer Benetech GM816 - 6-arm rotor
Anemometer / wind gauge is used to measure the movement of gases, the flow rate of air. The device has a 6-arm rotor, which, due to gas flow, begins to rotate. Measurements are...Grove - analog NTC temperature sensor
Analog sensor is compatible with Arduino and Raspberry Pi. It is powered with the voltage from 3.3 V to 5 V. It can measure temperature in the range from -40 °C to 125 °C with...Digital atmospheric pressure sensor - barometer - BMP280 - I2C - DFRobot SEN0372
Digital atmospheric pressure sensor manufactured by DFRobot. It has an integrated BMP280 chip from Bosch. The module integrates temperature and atmospheric pressure -...AS7262 - 6-channel visible light / color spectrum sensor - Adafruit 3779
The module is equipped with 6-channel sensor of spectrum, i.e. the spectrum of visible light. It allows you to measure and to characterize how different materials absorb...Bidirectional current / power sensor - INA219 - 26V 3,2A - STEMMA AT / Qwiic - Adafruit 904
Bidirectional current and power sensor manufactured by Adafruit. It has an embedded INA219 chip, two STEMMA QT / Qwiic standard connectors located on both sides of the...RFID/NFC MiFare Classic Tag transparent - 13,56MHz - Adafruit 361
The RFID /NFC identifier in the form of a transparent marker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...Gravity: Analog High Temperature Sensor
Analog sensor of the high temperature, operating in the range from 30 °C to 350 °C. It is powered with a voltage of 3.3 V to 5.5 V. The kit has a PT100 probe.DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical
The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.Romi - Magnetic Encoders set for Romi Chassis - 2 pieces - Pololu 3542
A pair of magnetic quadrature sensors, designed for mounting on Romi Chassis. Consists of a plate with the Hall sensor and the plastic rotor with magnets, a set of makes up...9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1 - Adafruit 3387
The sensor is a combination of 3-axis digital gyroscope, accelerometer and compass. It allows you to measure acceleration, magnetic field and angular velocity in the...3-axis MMA8452 I2C digital accelerometer - HW-616
A sensor for measuring accelerations in three axes in the range: ± 2g, ± 4 g or ± 8 g. The MMA8452 accelerometer communicates via the I2C bus. It is powered from 1.95 V to 3.6...Grove - module cover 1x2 blue - 4pcs.
Shield for the modules from Grove series in green color with size of 50 x 25 x 13 mm. It is also compatible with Lego and Makeblock. Allows you to mount two small or one large...DFRobot Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog signal. The kit includes a probe,...MPL115A2 - digital barometer, pressure / altitude sensor 115kPa I2C 3-5V - Adafruit 992
Module with digital barometer that provides pressure measurement in the range of 500 to 1150 hPa with the accuracy of up to 1.5 hPa, and altitude of up to 10 km with an...LSM6DSO - 3-axis accelerometer and I2C/SPI gyroscope - SparkFun SEN-18020
PCB with 6DoF LSM6DSO chip containing accelerometer and gyroscope along with 9 kB FIFO buffer and embedded processing interrupt functions. The device can detect shock, roll,...
