- New
- New
- Reduced price
- Sale
SENSORS - Strona 38
Loading...
Magnetic sensor - reed contact CMD1263 + screws
Wired proximity sensor activated magnetically. Case dimensions - 12 x 63 mm.
Index: AKS-10151
Index: AKS-10151
Magnetic sensor - reed contact CMD615
Wireless proximity sensor activated magnetically. Case dimensions 15 x 6.5 mm.
Index: AKS-10154
Index: AKS-10154
Sensor / probe to measure soil moisture - analog - Waveshare 9527
The sensor to determine the moisture level of the soil. It is powered with the voltage from 3.1 V to 5 V. The output is the analog voltage which increases its value along with...
Index: WSR-04504
Index: WSR-04504
Limit switch without lever - WK807 - 5pcs.
Limit switch without lever. Maximum operating parameters: a voltage AC 250 V and a current of 16 A.
Index: PAS-00925
Index: PAS-00925
DFRobot - 12V Solenoid Valve 1/2"
The enables the control of the liquid flow using a computer or microcontroller. The valve is supplied with the voltage of 12 V. It is closed to connect the power supply of 12...
Index: DFR-07423
Index: DFR-07423
Biomedical electrodes - 10pcs - SparkFun SEN-12969
10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
Grove - LM358 Ambient Light Sensor v1.2
Module from the Grove series is equipped with a sensor LM358. The sensor allows to determine the intensity of the light and reflects the analog voltage signal back to Arduino....
Index: SEE-11330
Index: SEE-11330
NTC 110 10kΩ thermistor with M6 screw connection
Thermistor of NTC type with a resistance of 10 kΩ with connector for M6 screw. The connecting cable has a length of 160 mm.
Index: SES-03878
Index: SES-03878
Cables for biomedical electrodes - SparkFun CAB-12970
Wires ended on the one side with three connectors for biomedical electrodes, on the other, with jack connector of a 3.5 mm.
Index: SPF-02605
Index: SPF-02605
SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1m - Adafruit 4099
Temperature and humidity sensor equipped with a weather-resistant metal mesh and a 1 m cable. The measurement range for temperature is from -40 °C to 125 °C, for humidity from...
Index: ADA-14969
Index: ADA-14969
Humidity, temperature and pressure sensor powered with a voltage of 3 to 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 10% RH to 100%...
Index: ADA-04633
Index: ADA-04633
MAX31865 - amplifier for PT100 - SPI temperature probes - Adafruit 3328
Low resistance amplifier designed for use with 2, 3 and 4 cable PT100 temperature probes. Communicates over SPI bus. Operates from 3 V to 5 V.
Index: ADA-08780
Index: ADA-08780
Set of 13 modules with cables for Arduino - Waveshare 9467
Set of 13 popular modules compatible with Arduino plates. In the set are i.a.: sensors of flames, color, soil moisture, rotation, sound, liquid level and many others. The...
Index: WSR-04511
Index: WSR-04511
Camera module with adjustable focus connected to the special connector of minicomputer Raspberry Pi version 3, 2, B+, A+ and older A and B. The device has a matrix CCD 1/4"...
Index: WSR-04521
Index: WSR-04521
MAX31856 Breakout - Universal Thermocouple Amplifier - Adafruit 3263
MAX31856 thermocouple amplifier module communicating via a 4-pin SPI interface. Compatible with K, J, N, R, S, T, E, and B type thermocouples. Operates with voltages from 3V to...
Index: ADA-07682
Index: ADA-07682
RFID / NFC MiFare Classic sticker - 13,56MHz - Adafruit 362
The ID of the RFID /NFC identifier in the form of a sticker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02951
Index: ADA-02951
DFRobot Gravity - vibration sensor with piezoelectric membrane
Analog vibration sensor with piezoelectric membrane. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04713
Index: DFR-04713
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419
IR beam interruption sensor - LED 3mm - 0-200cm
A motion sensor that detects the interruption of the infrared light beam transmitted between the transmitter and the receiver . The detection range is 0 cm to 200 cm ....
Index: DNG-18692
Index: DNG-18692
Ultrasonic distance sensor URM37 v5 2-800cm with temperature correction
Ultrasonic sensor from DFRobot operating in the range from 2 cm to 800 cm. It is powered with the voltage from 3.3 V to 5,5 V. Communication is via serial interface UART (RX,...
Index: DFR-03413
Index: DFR-03413
ICM-20948 9DoF - 3-axis accelerometer, gyroscope and magnetometer I2C/SPI Qwiic - Adafruit 4554
The Adafruit module is a combination of 3-axis gyroscope, accelerometer and compass. It allows to measure acceleration, magnetic field and angular velocity. The measuring...
Index: ADA-17709
Index: ADA-17709
Load Sensor Combinator (Ver. 1.1) - SparkFun BOB-13878
The module allows you to connect 4 load sensors - strain-gauge beams to one of the bridge via 4-wire cable. It finds application, for example, in the construction of the...
Index: SPF-07277
Index: SPF-07277
IR 940nm transmitter + wire - Iduino SE028
IR transmitter Iduino emitting light with a wavelength of 940 nm. Works with voltage of 5 V. The kit includes a cable 3-pin.
Index: OST-14286
Index: OST-14286
STEMMA - Soil Moisture Sensor - Adafuit 4026
The soil moisture sensor and temperature sensor from Adafruit. Its design allows you for the capacitive measurement using a single probe. It has not the bare metal, so it is...
Index: ADA-14431
Index: ADA-14431