- Reduced price
- Promotion
- Reduced price
- Promotion
Filament Polymaker PolyTerra PLA 1,75mm, 1kg - Sunrise Orange
Index: PLM-22647
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
SENSORS - Strona 7
Loading...
Waterproof probe with temperature sensor DS18B20 - 10m
Waterproof probe is equipped with a digital thermometer DS18B20 with a cable with the length of 10 meters.
Index: SES-04591
Index: SES-04591
Set of sensors and modules + box - 65 elements
A set of sensors for Arduino and Raspberry Pi, consisting of 65 items. The kit includes, i.a.: sensor of temperature and humidity, soil humidity sensor, smoke sensor, the...
Index: GRL-12795
Index: GRL-12795
Limit switch without lever - WK807 - 5pcs.
Limit switch without lever. Maximum operating parameters: a voltage AC 250 V and a current of 16 A.
Index: PAS-00925
Index: PAS-00925
Gravity: Analog Liquid Level Sensor (FS-IR02)
Photoelectric liquid's level sensor. It has high sensitivity without the need to use the mechanical parts. The probe withstands high temperature and high pressure.
Index: DFR-06612
Index: DFR-06612
DFRobot - 12V Solenoid Valve 1/2"
The enables the control of the liquid flow using a computer or microcontroller. The valve is supplied with the voltage of 12 V. It is closed to connect the power supply of 12...
Index: DFR-07423
Index: DFR-07423
DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Analog TDS sensor compatible with Arduino, it is used for measuring the hardness and the purity of water. It can be used to test the quality of water in households, hydroponic...
Index: DFR-10830
Index: DFR-10830
Stand for the Sharp digital sensor - Pololu 1133
PCB stand facilitating the connection of digital distance Sharp sensor with the main module of the project.
Index: PLL-00034
Index: PLL-00034
- On sale!
- Promotion
Grove - set of 5 female-female 4-pin - 2mm/50cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. The length of the cable is 50 cm. Version with a latch.
Index: SEE-04399
Index: SEE-04399
Biomedical electrodes - 10pcs - SparkFun SEN-12969
10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
Magnetic sensor to open door / window - reed contact CMD932
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.0 x 32 mm.
Index: SES-03128
Index: SES-03128
A pair of magnetic quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the Hall sensor and the plastic impeller with magnets,...
Index: PLL-04884
Index: PLL-04884
Reed switch normally - plastic 14mm - 5pcs.
Reed contact in the plastic straight case with the length of 14 mm. The set contains 5 reed contacts.
Index: MOD-09466
Index: MOD-09466
IR beam interruption sensor - LED 5mm - 0-100cm
The motion sensor reacts to the interruption of infrared light beam transmitted between the transmitter and the receiver . It has a detection range from 0 cm to 100 cm ....
Index: DNG-18691
Index: DNG-18691
BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V - soldered connectors
Very easy to use temperature, humidity and pressure sensor. The module is powered by 3.3 V and can also communicate via I2C or SPI interface . Sensors of this type are...
Index: ZES-16534
Index: ZES-16534
Phototransistor SFH-313FA 5mm 870nm - 5 pcs
Phototransistor in the case of 5 mm. Maximum sensitivity for the wave with the length of 870 nm. Darkened lens. 5 pcs.
Index: UCC-04245
Index: UCC-04245
ACS711EX current sensor -31A do +31A - Pololu 2453
Current sensor working in the range of +/- 31 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.
Index: PLL-01689
Index: PLL-01689
Grove - LM358 Ambient Light Sensor v1.2
Module from the Grove series is equipped with a sensor LM358. The sensor allows to determine the intensity of the light and reflects the analog voltage signal back to Arduino....
Index: SEE-11330
Index: SEE-11330
Grove - 125kHz RFID reader with antenna - Seeedstudio 113020002
Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...
Index: SEE-04417
Index: SEE-04417
Cable for analog distance sensors Sharp - men's tip - Pololu 1799
Cable with plug for analog distance Sharp sensors with a male end. Length: 30cm.
Index: PLL-00527
Index: PLL-00527
BNO085 9-DOF IMU Fusion Breakout - 3-axis accelerometer, magnetometer and gyroscope - Adafruit 4754
Sensor based on the BNO085 system equipped with an accelerometer, magnetometer and gyroscope. Allows you to measure acceleration, spatial orientation, and where the strongest...
Index: ADA-22113
Index: ADA-22113
BME - humidity, temperature and pressure sensor I2C/SPI - 3,3V/5V - Waveshare 15231
Humidity, temperature and pressure sensor powered with the voltage of 3.3 V or 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 0 %RH...
Index: WSR-13463
Index: WSR-13463
Microphone 50-56dB 9/4,5mm - SMD
Height h: 4.5 mm. Diameter Ø: 9 mm. Sensitivity: 50 - 56 dB. Items are sold in sets of 5 pieces.
Index: EAK-00739
Index: EAK-00739
MinIMU-9 v5 9DOF - accelerometer, gyroscope and magnetometer I2C - Pololu 2738
The sensor allows to measure 9 sizes: acceleration X, Y, Z magnetic field X, Y, Z and angular velocity X, Y, Z. It is a combination of 3-axis accelerometer and gyroscope...
Index: PLL-05528
Index: PLL-05528
Cable for analog distance sensors Sharp - female end - Pololu 1798
Cable with plug for analog distance Sharp sensors with a female tip. Length: 30 cm
Index: PLL-00528
Index: PLL-00528