Product description: 64 MPx camera with autofocus for Raspberry Pi - CSI-HDMI adapter - ArduCam B0399B0091
ArduCam camera module with a CSI-HDMI adapter designed to work with Raspberry Pi minicomputers. The camera is based on a Sony sensor with a resolution of up to 64 MPx, 9152 x 6944 px . It is equipped with manual and automatic focus and supports ePTZ with 10x digital zoom . The CSI-HDMI adapter allows you to extend the connection of the camera with Raspberry Pi up to 10 meters . The module works immediately after connection, without the need for additional configuration, which makes its use much easier. Pi Hawk-eye is compatible with the official Raspberry Pi V1, V2, HQ cameras and the Arducam OV5647, IMX219 and IMX477 series of cameras. It connects to a minicomputer via the MIPI CSI-2 connector. The module is also equipped with a microphone and headphone socket for audio signals and GPIO , which further increases its functionality.
The maximum resolution of 64 MPx is only supported by Raspberry Pi model 4B and CM4, it is limited to other platforms.
64 MPx camera with autofocus for Raspberry Pi - CSI-HDMI adapter - ArduCam B0399B0091.
The camera is based on a Sony sensor with a resolution of 64 MPx, 9152 x 6944 px.
Special features of the module
- High resolution of 64 MPx : perfect for projects requiring precise and clear images.
- Autofocus : Autofocus allows you to capture clear photos and videos without the need for manual adjustments.
- Increased cable length : thanks to the CSI-HDMI adapter, the connection between the camera and the Raspberry Pi can be extended up to 10 meters, which is especially useful in situations where the camera must be placed far from the central unit.
- Compatibility with multiple Raspberry Pi models : supports Raspberry Pi 4B / CM4 for 64 MPx resolution and Raspberry Pi 2 / 3 / CM3 / Zero W / Zero 2 W for 16 MPx resolution.
- Plug-n-play : works without the need for additional configuration, making installation and use much easier.
- Various video modes : supports video resolutions of 1080p / 30 fps, 720p / 60 fps and 640 x 480p / 60 / 90 fps, allowing you to adjust the quality of recordings to your specific needs.
- Audio/GPIO jack : has a microphone and headphone jack and additional solder pads that can be used to transmit audio or GPIO signals, increasing the functionality of the set.
Camera specifications
- Optical format: 1/1.7"
- Focus type: manual / automatic
- Resolution: 64 MPx, 9152 x 6944 px
- Video Mode (Raspberry Pi):
- 1080p/30fps
- 720p/60fps
- 640 x 480p / 60 / 90 fps
- Video mode (camera module):
- 1280 x 720 px / 120 fps
- 1920 x 1080 px / 60 fps
- 2312 x 1736 px / 30 fps
- 3840 x 2160 px / 20 fps
- 4624 x 3472 px / 10 fps
- 9152 x 6944 px / 2.7 fps
- Color Filter: Quad Bayer Coding (QBC)
- Supported platforms (for 64 MPx resolution): Raspberry Pi 4B / CM4
- Supported platforms (for 16 MPx resolution): Raspberry Pi 2 / 3 / CM3 / Zero W / Zero 2 W
- Raspberry Pi OS: Bullseye (32-bit / 64-bit)
- Focus: from 8 cm to infinity
- Focal ratio: F1.8
- Focal length: 5.1 mm
- Viewing angle: 84°
- Shutter type: rolling
- Output format: JPEG / YUV / RGB / RAW10
- Dimensions: 25 x 24 mm
Set contents
- 1x 64 MPx camera with autofocus for Raspberry Pi - ArduCam
- 2x CSI to HDMI adapter
- 1x FPC 15-22-pin ribbon cable, 150 mm long
- 1x FPC 22-22-pin ribbon cable, 150 mm long
- 1x FPC 15-15-pin ribbon cable, 80 mm long
- 1x FPC 15-22-pin ribbon cable, 73 mm long
Elements included in the set.
