CAN-Bus Shield v2.0 DFRobot - pad on the Arduino
CAN-Bus Shield v2.0 DFRobot - pad on the Arduino
CAN-Bus Shield v2.0 DFRobot - pad on the Arduino
CAN-Bus Shield v2.0 DFRobot - pad on the Arduino - zdjęcie 1
CAN-Bus Shield v2.0 DFRobot - pad on the Arduino - zdjęcie 2
CAN-Bus Shield v2.0 DFRobot - pad on the Arduino - zdjęcie 3

CAN-Bus Shield v2.0 DFRobot - Shield for Arduino

Index: DFR-06114

Shield for the Arduino that allows the use of serial CAN bus. It is equipped with chips MCP2515. It has a connector for microSD cards. It works with a voltage from 3.3 V to 5 V.

€23.02
€18.72 tax excl.
Waiting time: approx. 10-30 days
Waiting for delivery
30-day returns
Manufacturer: DFRobot
Compatibility: Arduino

Description of CAN-Bus Shield v2.0 DFRobot - Shield for Arduino

Shield for the Arduino that allows the use of serial CAN bus. It is equipped with chips MCP2515. It has a connector for microSD cards. It works with a voltage from 3.3 V to 5 V.

 

CAN-Bus Shield v2.0 DFRobot

The shield has led out pins of the Arduino, it allows for the installation of another shield.

 

Pins

Lines of the CAN bus, i.e. CANH and CANL were led out on the screw connection ARK and on the DB9 slot. The distribution of pins is visible in the figure below.

 

CAN-Bus shield - nakładka dla Arduino - schematCAN-Bus Shield v2.DFRobot 0 - top view.

 

Specification of CAN-Bus Shield v2.0 DFRobot - Shield for Arduino

  • Chip: MCP2515
  • Supply voltage: from 3.3 V to 5 V
  • DB9 connector
  • Connector for microSD memory cards
  • The possibility of applying another Shield module
  • Built-in switch
  • Dimensions: 76 x 54 x 19 mm
  • Weight: 40 g

 

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

Customers who bought this product also bought:

Arduino Uno Rev3 - module A000066

The original module from the Arduino Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.40 Price €21.40

RS485 / CAN - Shield for Arduino - Waveshare 10771

Shield that allows you to connect the Arduino to the RS485 interface or CAN bus. It is equipped with drivers: MAX3485 and SN65HVD230 for the CAN, it works with the Uno,...
Index: WSR-04517
Index: WSR-04517
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.74 Price €9.74

Microcontroler AVR - ATmega328P-PU DIP + bootloader Arduino

Microcontroller from AVR family, from Atmel in the through hole case (DIP). System has installed Arduino bootloader for the frequency of 16 MHz.
Index: UCC-01984
Index: UCC-01984
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.23 Price €3.23

Arduino Mega 2560 Rev3 - module A000067

Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...
Index: ARD-01062
Index: ARD-01062
In stock, shipping 24 hours!
(Check quantity)
Regular price €36.98 Price €36.98

Arduino Industrial 101 - WiFi + Ethernet

Advanced module created on the basis of Arduino Yun allows to program and control the device wirelessly through WiFi network. It is based on two microcontrollers: Atheros...
Index: ARD-06361
Index: ARD-06361
Unavailable
Regular price €43.95 Price €43.95

Tilt / shock sensor - Waveshare 9536

The tilt sensor detects changes in position. It can work as a shock sensor. It works with voltages from 3 V to 5.5 V.
Index: WSR-04497
Index: WSR-04497
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.91 Price €2.91

Step-Up/Step-Down Voltage Regulator S7V7F5 - 5V 1A - Pololu 2119

A miniature module of the pulse inverter with a voltage range from 2.7 V to 11.8 V. The output voltage is set to 5 V. Maximum current 1 A. Dimensions: 9 x 12 x 3 mm.
Index: PLL-00941
Index: PLL-00941
Available, 24h shipping!
(Check quantity)
Regular price €4.63 Price €4.63

CAN-Bus Shield for Arduino - SparkFun DEV-13262

Shield for Arduino supporting the CAN bus, it uses the chip MCP2515 and MCP2551. On board is a connector D-sub, microSD card slot, a connector to attach the display and GPS...
Index: SPF-02452
Index: SPF-02452
Waiting time: approx. 10-30 days
Regular price €30.81 Price €30.81

Micro metal gearmotor HP 100:1 320RPM - Pololu 1101

Polol's miniature 100:1 high power motor with a gearbox, 320 rpm, 2.2 kg*cm (0.215 Nm) torque.
Index: PLL-00246
Index: PLL-00246
Available, 24h shipping!
(Check quantity)
Regular price €14.86 Price €14.86

Micro Motor Mount - black - 2pcs. - Pololu 989

Black Polol micro motor mounts in black. Price for two pieces.
Index: PLL-00036
Index: PLL-00036
Available, 24h shipping!
(Check quantity)
Regular price €3.93 Price €3.93

Wheel 32x7 mm - white - 2 pieces - Pololu 1088

Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-00031
Index: PLL-00031
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.91 Price €2.91

Ball Caster 3/8'' - plastic - Pololu 950

Lightweight plastic ball in the bowl with a diameter of 3/8 inches, it is used to support the front of the two-wheeled robot.
Index: PLL-00030
Index: PLL-00030
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.85 Price €1.85

Products from the same category

Cytron ESP-WROOM-02 WiFi - Shield for Arduino

Shield for Arduino from Cytron, allowing you to connect the system to a wi-fi network. It includes a popular module ESO-WROOM-02, supports 802.11 b/g/n, communicates through...
Index: CTN-12407
Index: CTN-12407
Waiting time approx. 4-6 weeks
Regular price €12.79 Price €12.79

Velleman VMA202 - DataLogger with SD card reader - Shield for Arduino

Shield for Arduino with RTC DS1307 and a slot for SD memory cards. It can be used as a data logger, it has a place for a round CR1220 battery and for additional modules. It...
Index: VEL-13016
Index: VEL-13016
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.98 Price €9.98

AST-CAN485 WiFi Shield - SparkFun WRL-14597

Shield for Arduino from SparkFun, that allows you to connect the system to a Wi-Fi network. Shield is based on the ESP8266 that allows CAN485 module to communicate via Wi-Fi....
Index: SPF-14073
Index: SPF-14073
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.86 Price €21.86

DFRobot RS485 MAX485ESA - Shield for Arduino

Shield for Arduino, which allows data transfer via RS485 Protocol, which allows you to connect up to 32 devices on one line with the width of up to 1 km with a maximum speed up...
Index: DFR-02986
Index: DFR-02986
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.88 Price €9.88

DFRobot Ethernet W5200 microSD - Shield for Arduino

Module based on W5200 chip enabling Arduino users to easily connect to Ethernet network. It works with Arduino Uno and Mega 2560 and also has a microSD card reader.
Index: DFR-02990
Index: DFR-02990
Waiting time: about 10-30 days
Regular price €26.74 Price €26.74

Ethernet Shield W5100 for Arduino with microSD card reader - Iduino ST1044

Module based on W5100, allowing users of Arduino, a simple way to connect with Ethernet. Works with the Arduino Uno and Mega 2560. It has also a device for reading memory cards...
Index: MOD-03779
Index: MOD-03779
Waiting time approx. 10-30 days
Regular price €10.93 Price €10.93

Seeed BLE Shield Bluetooth 4.0 - Shield for Arduino

Shield for Arduino from Seeedstudio that enables communication in Bluetooth 4.0 BLE at a distance of up to 30 meters. Shield communicates over the UART interface, it has...
Index: SEE-04421
Index: SEE-04421
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.37 Price €18.37

Bluefruit LE Bluetooth programmer - Shield for Arduino - Adafruit 2746

Shield for Arduino Bluetooth Low Energy. Allows for wireless connection of a microcontroller (e.g. Arduino) with the device equipped with operating system Android (4.3+) or...
Index: ADA-04970
Index: ADA-04970
In stock, shipping 24 hours!
(Check quantity)
Regular price €26.74 Price €26.74

Arduino MKR Can Shield ASX00005 - Shield for Arduino MKR

Shield for Arduino MKR, enabling the connection to the CAN bus. It has a built-in chip MCP2515. It c ommunicates via the SPI interface. It works with a voltage of 3.3 V.
Index: ARD-12949
Index: ARD-12949
In stock, shipping 24 hours!
(Check quantity)
Regular price €36.98 Price €36.98

Arduino MKR 485 Shield ASX00004 - Shield for Arduino MKR

Shield for Arduino MKR,  connection of the microcontroller of the RS-485 bus which supports up to 32 devices on a line with length of up to 1 km with a speed up to 10 Mbps....
Index: ARD-12950
Index: ARD-12950
In stock, shipping 24 hours!
(Check quantity)
Regular price €34.65 Price €34.65

XBee Shield for Arduino - SparkFun WRL-12847

Shield makes it easy to create a wireless connection by using Arduino and XBee. It is w orking with modules Series 1, Series 2, standard and Pro. It has pins fixed to...
Index: SPF-01767
Index: SPF-01767
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.35 Price €11.93
  • Reduced price
  • On sale

DFRobot Bees Xbee - Shield for Arduino

Shield for Arduino, which enables to add a wireless connection to the microcontroller via connection of the XBee modules. The board has also plenty of space for extra items.
Index: DFR-05315
Index: DFR-05315
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.49 Price €13.49