Zestaw światłolub
Zestaw światłolub
Zestaw światłolub - zdjęcie 1
Zestaw światłolub - zdjęcie 2

Simple light follower robot DIY kit

Index: ROB-00277

Set includes elements for building a simple light follower robot. The robot requires no programming, making it ideal for beginning your journey with robotics.

€3.47
€2.82 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: OEM

Description

Set allows you to build an educational project, that is a robot following the light. The model uses two simple sensors (phototransistors) and the driver for DC motors. The electronic system has a microcontroller, so there is no need to create software that makes the robot ideal for the start of your adventure with robotics.

 

You can find the full course of manufacturing robots on the robotics forum forbot.pl.

The lessons are written in a simple and understandable way by an author of many interesting articles.

 

Set includes:

  • Universal board
  • Bridge L293D H
  • Stand
  • Goldpin 1x40 simple
  • Resistor 100 kOhm - 10 PCs. or a substitute with similar values
  • Resistor 47K - 10 PCs. or a substitute with similar values
  • Resistor 10 kOhm - 10 PCs. or a substitute with similar values
  • Twisted-pair cables of 0.5 m to create connections
  • Box for 3 AA batteries
  • Phototransistor L-53P3C - 2 PCs.

 

 

In our store you will find tools necessary in every robotics workshop and batteries to power the robot.

Zapakowany i opisany zestaw do budowy prostego robota

Accessories

In our offer you can also find the Magician Chassis, which can be used as chassis for the light follower.

 

Koła oraz platformy nośne do budowy robota       

Attention!

The light follower kit does not contain chassis the Magician Chassis, it must be purchased separately.

 

We also invite you to visit our website: http://hobbyrobotyka.pl/.

 

 

 

Chassis - wheels 2
Chassis - type accessories
Chassis + drive no
Chassis + driver: no
Test 3

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Wheels 32x7mm - black - 2pcs - Pololu 1087

Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.
Index: PLL-00012
Index: PLL-00012
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.78 Price €2.78

Ball Caster 3/8'' - plastic - Pololu 950

Lightweight plastic ball in the bowl with a diameter of 3/8 inches, it is used to support the front of the two-wheeled robot.
Index: PLL-00030
Index: PLL-00030
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.85 Price €1.85

DC Micromotors HL149 with 10: 1 transmission

DC HL149 motor with 10:1 gearing. 0.04 Nm (0.4 kgcm) torque. Speed 315 rpm. Nominal supply voltage 6 V.
Index: MOT-00514
Index: MOT-00514
Unavailable
Regular price €3.70 Price €3.70

DC Micromotors HL149 with 21: 1 transmission

HL149 DC motor with 21:1 geared motor. 0.075 Nm (0.76 kgcm) torque. Speed 160 rpm. Nominal supply voltage 6 V.
Index: MOT-00515
Index: MOT-00515
Unavailable
Regular price €3.70 Price €3.70

Customers who bought this product also bought:

Filament Spectrum PLA 1.75mm 1kg - Arctic White

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Arctic White with length of 330...
Index: SPC-10986
Index: SPC-10986
Czas oczekiwania ok. 2-5 dni
Regular price €18.60 Price €18.60

Plug WT-16 - with earthing - black

The angular plug for mounting on the cable. It has the ground.
Index: KAB-08123
Index: KAB-08123
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.06 Price €1.06

MMA8452Q 3-axis I2C digital accelerator module - SparkFun SEN-12756

Sensor for measuring acceleration in three axes in the range: ± 2g, ±4 g or ±8 g. Powered with the voltage of 1.95 V - 3.6 V, it is characterized by small size, low energy...
Index: SPF-01771
Index: SPF-01771
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.88 Price €9.88

Adhesive liquid G-ECO-N - 500ml

Preventive measure printout detachment at printing . It is a particularly important safeguard when the component we print is large in size and the printing time is many...
Index: GMZ-17642
Index: GMZ-17642
Available, 24h shipping!
(Check quantity)
Regular price €6.95 Price €6.95

Cable for analog Sharp distance sensors - Pololu 117

Cable with JST plug for analog distance sensors from Sharp company. Length: 30 cm
Index: PLL-00028
Index: PLL-00028
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.92 Price €0.92

Thermostat W1209 with temperature probe -50°C / + 110°C

Thermostat module with display for controlling up to 2300 W based on temperature. Powered by 12 V. Adjusts temperature from -50 °C to 110 °C, has built-in relay outputs. A...
Index: SES-07264
Index: SES-07264
Available, 24h shipping!
(Check quantity)
Regular price €4.16 Price €4.16

SSOP adapter to 28-pin DIP - SparkFun BOB-00500

Adapter enables the connection of the chips in SMD SSOP28 cases to threaded output holes of DIP 28 pin. It also allows you to connect circuits to a breadboard or connect with...
Index: SPF-01852
Index: SPF-01852
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.69 Price €1.69

LEGO Adapter - 3mm Shaft - Pololu 1011

The adapter allows you to connect the lego wheels with hexagonal shafts of 3 mm.
Index: PLL-00145
Index: PLL-00145
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.67 Price €2.67

Rubber V-belt - 2x90mm -10pcs.

Rubber belt used to transfer the drive e.g. from the motor shaft to another module, the thickness of the belt is 2 mm, the diameter is 90 mm. The set contains 10 pcs of belts.
Index: GRL-12513
Index: GRL-12513
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.37 Price €1.37

Hanging Pulley - 7x20mm

Double, pendant, metal pulley with the width of 7 mm and a diameter of 20 mm. The wheel can rotate 360 °. The sizes of the whole is: 45 x 20 x 11 mm.
Index: GRL-12515
Index: GRL-12515
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.28 Price €1.28

Glue gun 60W - ZD-7

Hot-melt glue gun with 60 W. Supplied with cartridges of 11,2 mm diameter.
Index: NSZ-00894
Index: NSZ-00894
Waiting time: about 10-30 days
Regular price €6.72 Price €6.72

Glue Gun Stick 11.2 / 300mm - transparent

Adhesive gun insert 11,2/300 mm (thick) transparent. Price for five pieces.
Index: CHE-00895
Index: CHE-00895
Available, 24h shipping!
(Check quantity)
Regular price €1.37 Price €1.37

Products from the same category

DFRobot Insekt Hexa Bot Kit - DIY kit

6-legged walking robot for self-assembly. Unit is powered by 3 servos micro type which are attached to the set. The power source is four AAA batteries.
Index: DFR-04282
Index: DFR-04282
In stock, shipping 24 hours!
(Check quantity)
Regular price €43.02 Price €43.02

DFRobot MiniQ Discovery Kit - 2-wheeled robot platform with driver and Romeo controller

Driving robot based on Romeo v2 board compatible with Arduino. It has two DC motor, micro servo and distance sensor Sharp GP2Y0A21. The robot can be programmed using the...
Index: DFR-04563
Index: DFR-04563
In stock, shipping 24 hours!
(Check quantity)
Regular price €85.81 Price €85.81

Vortex - An Arduino Based Programmable Toy Robot For Kid (2 packs)

Robot for beginner electronics and robotics enthusiasts, including children. After putting it out of the box, just pair it with your smartphone via Bluetooth. The device can...
Index: DFR-07587
Index: DFR-07587
In stock, shipping 24 hours!
(Check quantity)
Regular price €277.91 Price €208.43
  • Reduced price
  • On sale

Minisumo DIY KIT

Kit allows you to build educational robot minisumo class. The kit Includes a course with which you will learn the process of designing, installation and programming electronic...
Index: ROB-01226
Index: ROB-01226
In stock, shipping 24 hours!
(Check quantity)
Regular price €23.02 Price €23.02

Line tracing car - line follower robot DIY kit

The set includes elements for building a robot that follows a black line drawn on a white background. A soldering iron is required for installation, the device does not require...
Index: DGU-02740
Index: DGU-02740
Available, 24h shipping!
(Check quantity)
Regular price €18.37 Price €18.37

DFRobot Flame Wheel Robot - DIY platform

Agile two-wheeled robot Flame Wheel Robot for self-assembly. The unit is driven by 2 DC motors included in the kit. It has a unique and innovative way of moving. The...
Index: DFR-08109
Index: DFR-08109
In stock, shipping 24 hours!
(Check quantity)
Regular price €41.74 Price €41.74

Velleman KSR11 RobotKit 3in1 STEM - set for construction of off-road robot

Set KSR11 allows you to create one of three designs of a robot moving on rough terrain. Designed for children aged 14+. The design of the rover overcomes any obstacles, the...
Index: ROB-09772
Index: ROB-09772
In stock, shipping 24 hours!
(Check quantity)
Regular price €39.30 Price €39.30

Velleman VR408 Allbot - four-legged robot

Modular robot based on the Arduino platform. Set allows you to build a 4-legged robot that can be controlled using 8 servos. Allbot can be reprogrammed using the Arduino IDE or...
Index: VEL-10027
Index: VEL-10027
In stock, shipping 24 hours!
(Check quantity)
Regular price €120.70 Price €120.70

DFRobot Light Chaser DYI KIT - light follower

A robot that autonomously follows in the direction of the light source. A kit for self-assembly. Does not require programming. Perfect for beginner robot creators.
Index: DFR-04281
Index: DFR-04281
Czas oczekiwania: ok. 10-30 dni
Regular price €14.88 Price €14.88

Velleman KSR14 - solar powered rover

The set includes elements to build a robot powered by solar panels. Mounting kit allows you to explore the key issues associated with electronics and mechanics,  while giving...
Index: VEL-10717
Index: VEL-10717
In stock, shipping 24 hours!
(Check quantity)
Regular price €12.21 Price €12.21

Frilled Lizard Robot Kit

Construction kit for self-assembly. It allows you to create robot-lizards modelled on the genre Chlamydosaurus kingii. The birthplace of this lizard is North-West Australia and...
Index: ORJ-12146
Index: ORJ-12146
Unavailable
Regular price €25.56 Price €25.56

Velleman KSR13 - 14in1 robot building kit - powered by solar energy

Set allows you to build 14 project with various skill levels working on solar energy. Mounting kit allows you to explore the key issues associated with electronics and...
Index: VEL-10716
Index: VEL-10716
In stock, shipping 24 hours!
(Check quantity)
Regular price €23.14 Price €23.14