Product description: Filament Polymaker PolyTerra PLA Dual Foggy Orange 1.75 mm 1 kg - Gray-Orange
The PolyTerra PLA Dual Foggy Orange filament is a completely biodegradable and environmentally friendly material that will certainly appeal to 3D printing enthusiasts. The filament combines organic materials with PLA, while reducing the amount of plastic it contains. The product is wound on a 100% recycled cardboard spool . PolyTerra PLA is a durable, easy-to-print filament , and the models created from it have a matte finish. One spool contains 1 kg of Grey-Orange filament and its diameter is 1.75 mm . Its unique color is perfect for printing decorative elements, adding elegance to them.
Filament Polymaker PolyTerra PLA Dual Foggy Orange 1.75 mm 1 kg - Gray-Orange.
PolyTerra PLA is a completely biodegradable material.The future is in your hands!
Polymaker is aware of the harmful impact of plastic on our planet and is launching new, environmentally friendly PolyTerra PLA filaments with reduced plastic content. This is a step forward on the path to improving the condition of our planet. The company also committed to planting one tree for every reel sold , in the area where it was purchased. This is intended to "compensate" the Earth for the carbon dioxide emitted during the production of the material.
Features of the PolyTerra PLA filament
- Biodegradable
- Environmentally friendly
- Supplied on a cardboard spool
- Durable
- Waterproof
- Odorless
- Easy to print
- With a matte finish
- With very good adhesion between layers
- Low shrinkage
The spool contains 1 kg of filament with a diameter of 1.75 mm.Suggested filament printing parameters
| Printing temperature | From 190°C to 230°C |
| Table temperature | From 25°C to 60°C |
| Cooling | Recommended |
| Due to differences in the design of printers, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Technical specifications and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75mm |
| Color | Grey-Orange |
| Print speed | From 30 mm/s to 70 mm/s |
| Printing temperature | From 190°C to 230°C |
| Table temperature | From 25°C to 60°C |
| Material density | 1.31 g/cm³ |
| Spool - material | PolyTerra PLA Dual Foggy Orange |
| Desiccant | Yes |
| Vacuum packaging | Yes |
| Net weight | 1 kg |
