SHT35 - Digital Temperature and Humidity Sensor Breakout - DFRobot SEN0333

Index: DFR-17381 EAN: 5904422345792

DFRobot temperature and humidity sensor with I2C communication. Its operation is based on the Sensirion SHT35 sensor chip. It is compatible with 3.3 V / 5 V Arduino type controllers,micro:bit,ESP32. The measuring range for temperature is from -40°C to 125°C and for humidity from 0% to100% RH.

€18.42
€14.98 tax excl.
Available, 24h shipping!
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino

Product description: SHT35 - digital temperature and humidity sensor I2C

DFRobot temperature and humidity sensor withI2Ccommunication.Its operation is based on the Sensirion SHT35 sensor chip. It is compatible with 3.3V / 5V Arduino, micro:bit, ESP32 type controllers. The measuring range for temperature is from -40°Cto 125°C (withaccuracy of ± 0.2℃) and for humidity from 0% to 100% RH (withaccuracy of ± 1.5% RH).The sensor has the advantage of very precise calibration, which takes place automatically. It has low power consumption and also has high interference immunity.

cyfrowy czujnik temperatury i wilgotności
Digital temperature and humidity sensor with I2C interface.

The module has outputs in the form of soldering fields, to which you can solder goldpin connectors - raster 2.54 mm (included in the kit). They allow to connect the circuit with the main module (e.g. Arduino) orconnect to thecontact board.

Product compatible with Arduino

The manufacturer has prepared auser guide andlibrary with asample program forArduino users.

Schemat podłączenia

Pin Description
VCC Pin power.
GND The weight of the system.
SCL Clock line of the I2C interface.
SDA I2C interface data line.
INT

Pin alarm and interruption.

RST Module reset activated in a low state.

Sensor specification SHT35

  • Operating voltage: 2.15 V to 5.5 V
  • Working current: <1.5 ma="" span="">
  • Temperature
    • Measuring range: -40°C to 125°C
    • Accuracy: ± 0.2°C
  • Humidity
    • Measuring range: 0% RH to 100% RH
    • Accuracy:± 1,5%RH within the range from 0% RH to 80% RH (at 25℃)
  • Communication: I2C
  • Outline dimension: 19 x 16 mm / 0.75 x 0.63 inch
  • Mounting hole size: 2 mm / 0.08 inch
  • Spacing of mounting holes: 15 mm / 0.59 inch

Interface I2C
Sensor - Temperature to 125 °C
Sensor - Temperature accuracy +/- 0.2°C
Sensor - Temperature from -40 °C - 120 °C

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

ArduCam-Mini OV5642 5MPx 2592x1944px 120fps SPI - camera module for Arduino UNO Mega2560, Raspberry Pi Pico

Camera module for Arduino 5 MPx with a resolution of 2592 px x 1944 and speeds up to 120 frames per second. It extends the capabilities of the microcontroller with the ability...
Index: ACM-06558
Index: ACM-06558
In stock, shipping 24 hours!
Check quantity
Regular price €49.69 Price €49.69

WiFi module ESP8266 Wemos NodeMCU V3 32Mb - 11 GPIO, ADC, PWM

Wi-fi module based on ESP8266. On Board 11 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in ADC and USB-UART converter. It has installed NodeMCU software...
Index: GRL-10908
Index: GRL-10908
In stock, shipping 24 hours!
Check quantity
Regular price €7.57 Price €7.57

DFrobot Gravity - Carbon Dioxide Sensor CO2 IR V2.0 - analog

High-precision sensor that measures the concentration of CO2 (carbon dioxide) in the air. Equipped with analog output, works with a voltage 5 V. Operates in the range from 400...
Index: DFR-07592
Index: DFR-07592
In stock, shipping 24 hours!
Check quantity
Regular price €62.71 Price €62.71

DFRobot Gravity - DS18B20 temperature sensor

Digital temperature sensor DS18B20 with the Gravity interface compatible with Arduino. It works in the range from -55 °C to 125 °C. It is powered with the voltage from 3.3 V...
Index: DFR-11281
Index: DFR-11281
In stock, shipping 24 hours!
Check quantity
Regular price €6.29 Price €6.29

Temperature sensor DS18B20 - black module - Iduino SE042

Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 5 V.
Index: GRL-12512
Index: GRL-12512
In stock, shipping 24 hours!
Check quantity
Regular price €2.37 Price €2.37

Soil moisture sensor

The sensor to determine the moisture level of the soil. It is powered with the voltage from 3.3 V to 5 V. It has digital and analog output, making it compatible with most of...
Index: MOD-01588
Index: MOD-01588
In stock, shipping 24 hours!
Check quantity
Regular price €1.19 Price €1.19

Feather M0 + radio module 433 MHz RFM96 LoRa - compatible with Arduino - Adafruit 3179

A small module with a 32-bit microcontroller ARM Cortex M0 ATSAMD21G18 known from Arduino Zero and the radio module RFM96 433 MHz of long range (LoRa). Feather is designed for...
Index: ADA-06567
Index: ADA-06567
In stock, shipping 24 hours!
Check quantity
Regular price €49.69 Price €49.69

DFRobot HR8833 - two-channel driver for DC 10V/1,5A motors

A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.
Index: DFR-06934
Index: DFR-06934
Available, 24h shipping!
Check quantity
Regular price €5.19 Price €5.19

Solar power module DFRobot with 2V / 160mA solar cell

This module allows you to charge a 3.7V Li-pol battery with the included mini solar cell or microUSB port and power your devices with 3.3V. Included is a cable with JST...
Index: DFR-12855
Index: DFR-12855
Available, 24 hours shipping!
Check quantity
Regular price €21.59 Price €21.59

Temperature sensor DS18B20 - digital 1-wire THT

Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.
Index: SES-00165
Index: SES-00165
In stock, shipping 24 hours!
Check quantity
Regular price €4.32 Price €4.32

AltIMU-10 v5 - gyroscope, accelerometer, compass and I2C 3-5V altimeter - Pololu 2739

Sensor for measuring acceleration, magnetic field, angular speed and altitude. It is a combination of 3-axis accelerometer and gyroscope LSM6DS33, LIS3MDL magnetometer and...
Index: PLL-05728
Index: PLL-05728
In stock, shipping 24 hours!
Check quantity
Regular price €48.83 Price €48.83

JustPi StarterKit with Raspberry Pi 4B WiFi 4GB RAM + 32GB microSD + accessories - case with two fans

Raspberry Pi 4B  justPi set with 4 GB of RAM with a 5 V / 3 A power supply with a C-type USB plug, as well as an aluminum housing with two fans. The set also includes:...
Index: RPI-16492
Index: RPI-16492
Available, 24h shipping!
Check quantity
Regular price €156.02 Price €156.02

Products from the same category

Temperature and humidity sensor DHT11 + 50C

Popular temperature and humidity sensor with a digital, single wired interface. Measurement range: temperature 0°C to +50 °C, humidity 20% to 90% RH .
Index: UCC-09301
Index: UCC-09301
In stock, shipping 24 hours!
Check quantity
Regular price €3.45 Price €3.45

Temperature sensor DS18B20 - digital 1-wire THT

Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.
Index: SES-00165
Index: SES-00165
In stock, shipping 24 hours!
Check quantity
Regular price €4.32 Price €4.32

DS18B20 temperature sensor + 4,7kΩ resistors

This kit consists of one temperature sensor DS18B20 with the 1-wire interface and ten resistors of 4.7 kΩ in the through-hole case.
Index: SES-09821
Index: SES-09821
In stock, shipping 24 hours!
Check quantity
Regular price €4.32 Price €4.32

Temperature and humidity sensor DHT11 - module + wires

Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH . It has connectors for connecting the sensor...
Index: MOD-01886
Index: MOD-01886
In stock, shipping 24 hours!
Check quantity
Regular price €3.88 Price €3.88

Temperature and humidity sensor DHT22 (AM2302) - module + cables

Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature -40 to +80 °C, humidity 0-100% RH.
Index: MOD-02637
Index: MOD-02637
In stock, shipping 24 hours!
Check quantity
Regular price €8.66 Price €8.66

Temperature and humidity sensor DHT22 (AM2302)

Popular temperature and humidity sensor with digital interface,  jednoprzewodowym . Measuring range: temperature from -40 to 80 °C, humidity 0-100% RH.
Index: UCC-01612
Index: UCC-01612
In stock, shipping 24 hours!
Check quantity
Regular price €8.18 Price €8.18

BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V - soldered connectors

Very easy to use temperature, humidity and pressure sensor. The module is powered by 3.3 V and can also communicate via I2C or SPI interface . Sensors of this type are...
Index: ZES-16534
Index: ZES-16534
Available, 24h shipping!
Check quantity
Regular price €21.68 Price €21.68

Temperature sensor DS18B20+ module - blue

Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 3.0 V to 5.5 V
Index: MOD-01506
Index: MOD-01506
Waiting for confirmation of delivery date
Regular price €2.58 Price €2.58

BME - humidity, temperature and pressure sensor I2C/SPI - 3,3V/5V - Waveshare 15231

Humidity, temperature and pressure sensor powered with the voltage of 3.3 V or 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 0 %RH...
Index: WSR-13463
Index: WSR-13463
In stock, shipping 24 hours!
Check quantity
Regular price €16.71 Price €16.71

Temperature and humidity sensor DHT11 - module Iduino SE052

Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH. It has connectors for connecting the sensor...
Index: WSR-04918
Index: WSR-04918
In stock, shipping 24 hours!
Check quantity
Regular price €3.84 Price €3.84

Temperature sensor DS18B20 - black module - Iduino SE042

Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 5 V.
Index: GRL-12512
Index: GRL-12512
In stock, shipping 24 hours!
Check quantity
Regular price €2.37 Price €2.37

SHT31 - digital humidity and temperature sensor I2C - Adafruit 2857

Humidity and temperature sensor powered by the voltage from 3 V to 5.0 V with I2C interface. The measurement of temperature is from -40 °C to 125 °C, humidity from 0 to 100 % RH.
Index: ADA-05415
Index: ADA-05415
In stock, shipping 24 hours!
Check quantity
Regular price €19.51 Price €19.51