DFRobot Gravity Expansion Shield - expansion board for the OpenMV Cam M7 camera

Index: DFR-13502 EAN: 6959420914333

Shield extending the capabilities of the camera OpenMV Cam M7 with additional connectors for connecting the sensors and modules from the Gravity series. Board is equipped with a microUSB port used to 5 V power supply, and the power switch of 3.3 V / VIN that allows you to connect servos or engines. It has digital ports, analog, serial and I2C.

DFRobot Gravity Expansion Shield - expansion board for the OpenMV Cam M7 camera
€6.00
€4.88 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Manufacturer: DFRobot

Description

Shield extending the capabilities of the camera OpenMV Cam M7 with additional connectors for connecting the sensors and modules from the Gravity series. Board is equipped with a microUSB port used to 5 V power supply, and the power switch of 3.3 V / VIN that allows you to connect servos or engines. It has digital ports, analog, serial and I2C.

Example of connecting with the camera andservo.

Attention

  • The USB port is only for powering the chip, you can't program through it. The manufacturer recommends a 5 V / 1 A voltage.
  • When you install the board on the camera, you should pay attention to the location of the USB port, it must be in the same place that the USB port of the camera.
  • OpenMV board works with a voltage of 3.3 V so the analog inputs do not support 5 V. All signal pins have a voltage of 3.3 V.
  • In the case of using a motor or servo to a project, they must be powered through ports P7 - P9, connecting external power and switching the power supply to the VIN page.
  • Ports P7, P8, P9 can be supplied with the voltage of 3.3 V, or VIN, selection is via switch.

Specification

  • External supply voltage: microUSB ports - 5 V / 1 A
  • Connectors:
    • colored - Gravity series 
    • 9 digital port
    • 1 analog port
    • 1 serial port
    • 2 I2C ports
  • Signal level of interface: high - 3.3 V, low - 0 V
  • Voltage range of analog inputs: 0 V to 3.3 V
  • The output voltageof LDO: 3.3 V
  • The output current of LDO: < 500 mA
  • Board sizes: 35.6 x 24.8 mm

Package width 5.7 cm
Package height 2.7 cm
Package depth 6.2 cm
Package weight 0.015 kg

Be the first to ask a question about this product!

Product reviews

DFRobot Gravity Expansion Shield - expansion board for the OpenMV Cam M7 camera

4/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Piotr K. 14.02.2021 Confirmed purchase Translated review
ok

Customers who bought this product also bought:

Products from the same category: