Gravity - I2C ozone sensor - DFRobot SEN0321
Gravity - I2C ozone sensor - DFRobot SEN0321
Gravity - I2C ozone sensor - DFRobot SEN0321
Gravity - I2C ozone sensor - DFRobot SEN0321
Gravity - I2C ozone sensor - DFRobot SEN0321
Gravity - I2C ozone sensor - DFRobot SEN0321 - zdjęcie 1
Gravity - I2C ozone sensor - DFRobot SEN0321 - zdjęcie 2
Gravity - I2C ozone sensor - DFRobot SEN0321 - zdjęcie 3
Gravity - I2C ozone sensor - DFRobot SEN0321 - zdjęcie 4
Gravity - I2C ozone sensor - DFRobot SEN0321 - zdjęcie 5

Gravity - ozone sensor I2C - electrochemical - DFRobot SEN0321

Index: DFR-16575

Electrochemical ozone sensor for accurate O3 concentration measurement in the environment. Its measuring range is from 0 ppm to 10 ppm. It communicates via the I2C interface and has a built-in Gravity connector for easy connection to the main module. The sensor is powered from 3.3 V to 5.5 V.

€54.78
€44.54 tax excl.

Available, 24h shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino Raspberry Pi

Description: Gravity - I2C ozone sensor - electrochemical - DFRobot SEN0321.

Electrochemical ozone sensor for accurateO3 concentration measurement inthe environment. Compatible with ArduinoandRaspberryPi, the modulecan be used in portable measuring stations and disinfection rooms. Its measuring range is from 0ppm to 10 ppm.It communicates through the I2C interface andhasa built-in Gravity connector for easy connection to the main module. The sensor is poweredfrom 3.3 V to 5.5 V.The sensor has a service life of 2 years.

Przykład połączenia z Arduino

Example of connection with Arduino.

Ozone is mainly formed by the emission of photochemical reactions of NOx, VOC and other pollutants. The acceptable daily ozone concentration standard for humans is 260μg / m3.Too high a concentration may causefatigue, coughing, chest compression, chest pain, wrinkles, nausea and headaches, heart rate increase, memory loss, visual impairment and other symptoms.

Czujnik ozonu I2C wraz z przewodem GravityI2C ozone sensor, a compatible cable is also included.

Precautions

  • Do not connect or disconnect sensors on the module.
  • It is forbidden to interfere with the module electronics.
  • Avoid contact with organic solvents (silicones and other adhesives), pharmaceuticals, oils and high concentrations of gases.
  • The module must not be completely immersed in resin and must not be submerged in an anaerobic environment.
  • The module must not be used for a long time in an environment containing corrosive gas.
  • The unit should be protected against excessive shocks and vibrations.
  • The "warm-up" time of the module after the first start-up is 24-48 hours.
  • Do not tear the white membrane from the sensor.
  • The module should not be installed in a highly convective environment.
  • Do not place the module in high concentration organic gas for a long time.

Main functions of the ozone sensor

  • Measurement of ozone intensity
  • Built-in Gravity interface
  • Digital output

Ozone sensor specifications

  • Supply voltage: 3.3 V to 5.5 V
  • Interface: Gravity
  • Communication: I2C
  • Measuring range: 0 ppm to 10 ppm
  • Measurement resolution: 0.01 ppm (10 ppb)
  • Warm-up time: up to 3 minutes
  • Response time: up to 90 seconds
  • Recovery time: up to 90 seconds
  • Operating temperature: -20°C to 50°C
  • Operating humidity: 15% to 95% RH
  • Storage temperature: -20°C to 50°C
  • Lifetime: up to 2 years
  • Dimensions: 37 x 27 mm
  • Weight: 22 g

The set includes

  • Ozone sensor
  • Gravity cable
  • Nylon distance M3x10 - 4 pcs.
  • Mounting screws M3x5 - 8 pcs.

Akcesoria dołączone do zestawuAccessories included in the set.

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Rocker switch RS203-6C3R - 250V / 16A - red

Rocker switch, 3-position, bistable. It is e quipped with 6 contacts with the load of 250 V / 16. Pins pitch is 11 mm. The size of the switch: 32 x 31,5 x 25 mm.
Index: AKS-12075
Index: AKS-12075
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.66 Price €0.66

MK621 On-Off Switch 250V/15A - Green

Switch, type on-off. The load capacity of the contacts is 250 V / 15 A.
Index: KAB-03710
Index: KAB-03710
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.53 Price €0.53

Nylon Distance Bolts 4 mm - 10 pcs.

Plastic distance bolts, length 4 mm, outer diameter of 6.3 mm and an internal 3.5 mm. Price for 10 pieces. Elements of this type are based on  a  screw, allow you to keep...
Index: MTN-04228
Index: MTN-04228
Goods pending acceptance - available within a few days
Regular price €0.18 Price €0.18

Nylon Distance Bolts 8mm - 10pcs.

Plastic distance piece with a length of 8 mm, external diameter 6.3 mm and internal diameter 3.5 mm. Price per 10 pieces. Elements of this type mounted on the screw, allow to...
Index: MTN-04227
Index: MTN-04227
Goods pending acceptance - available within a few days
Regular price €0.26 Price €0.26

Self-adhesive square feet 12x12mm - 4 pcs.

Self-adhesive feet - props  for electronic modules, square size 12 x 12 x 6 mm . Price for 4 PCs.
Index: ETN-01334
Index: ETN-01334
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.64 Price €0.64

Plastic case Maszczyk KM-180 ABS - 169x85x30mm black

Two-part, universal ventilated case for an electric circuit in black. External dimensions are 169 x 85 x 30 mm.
Index: MSZ-14204
Index: MSZ-14204
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.42 Price €2.42

Plastic case Kradex Z44J - 149x80x33mm light-colored

Two-part, universal housing with external dimensions of 149 x 80 x 33 mm for the electronics made of ABS in black.
Index: KDX-05911
Index: KDX-05911
Delivery scheduled for 2022-02-14
Regular price €1.96 Price €1.96

DFRobot LCD Keypad v2.0 - display Shield for Arduino

Shield for Arduino with popular LCD 2x16 character display and with five buttons at the user's disposal. Thanks to the LCD KeyPad Shield, you can easily create a user interface.
Index: DFR-05182
Index: DFR-05182
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.64 Price €11.64

DC 5,5x2,1mm socket with quick connection and buttons v2

DC φ5.5 x 2.1 mm socket (for AC adapter) with connector allowing you to mount the cable using the buttons.
Index: KAB-03506
Index: KAB-03506
Waiting for confirmation of delivery date
Regular price €0.75 Price €0.75

5pin 250V electric cube

The electric 5-pin cube that allows to connect the wires with the cross-sections from 0.75 to 2.5 mm.
Index: LEC-09986
Index: LEC-09986
Waiting for confirmation of delivery date
Regular price €0.21 Price €0.21

Clip for 9V battery with cable - 15cm

Connector for easy connection of popular 9 V (6F22) batteries with stripped cable ends.
Index: AKC-00416
Index: AKC-00416
Available, 24 hours shipping!
(Check quantity)
Regular price €0.33 Price €0.33

Lithium battery CR2032 3V Maxell - 5 pcs

Lithium battery model CR2032 by Maxell - a popular pill. Price for 5 pieces. Rated battery voltage is 3 V , capacity 220 mAh . Battery dimensions are 3.2 x 20 mm . Made in...
Index: BAL-15922
Index: BAL-15922
Available, 24h shipping!
(Check quantity)
Regular price €1.76 Price €1.76

Products from the same category

Gravity - air quality sensor CCS811 - I2C - DFRobot SEN0318

The module is equipped with a CCS811 sensor which allows to measure eCO2 and TVOC dust concentration in the air. It is equipped with a Gravity connector. It communicates...
Index: DFR-16347
Index: DFR-16347
Waiting for confirmation of delivery date
Regular price €14.94 Price €14.94

DFrobot Gravity - Carbon Dioxide Sensor CO2 IR - analog

High-precision sensor that measures the concentration of CO2 (carbon dioxide) in the air. Equipped with analog output, works with a voltage from 4.5 V to 5.5 V. Operates in the...
Index: DFR-07592
Index: DFR-07592
In stock, shipping 24 hours!
(Check quantity)
Regular price €63.58 Price €63.58

Gravity - alcohol sensor 0-5ppm - I2C / UART - DFRobot SEN0376

A sensor manufactured by DFRobot that enables accurate measurement of alcohol concentration in air. It is used when measuring low alcohol concentration, in breathalysers ,...
Index: DFR-19016
Index: DFR-19016
Available
(Check quantity)
Regular price €28.38 Price €28.38

Gravity: Analog Infrared CO2 Sensor For Arduino (0~50000 ppm)

High-precision sensor that measures the concentration of CO2 (carbon dioxide) in the air. It is equipped with an UART interface, it works with a voltage from 4.5 V to 5.5 V. It...
Index: DFR-08110
Index: DFR-08110
Delivery scheduled for 2022-02-03
Regular price €96.58 Price €96.58

DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical

The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...
Index: DFR-04487
Index: DFR-04487
In stock, shipping 24 hours!
(Check quantity)
Regular price €56.98 Price €56.98

DFRobot Gravity - analog X dissolved oxygen sensor - SEN0237-A

Dissolved oxygen analog sensor compatible with Arduino. The module measures the concentration of dissolved oxygen in the water to determine its quality. It can be used, for...
Index: DFR-09968
Index: DFR-09968
Waiting for confirmation of delivery date
Regular price €184.58 Price €184.58

Gravity - MEMS Gas Sensor - CO, CH4, H2, NO2, NH3 - I2C - MiCS-4514 - DFRobot SEN0377

Gas sensor with integrated MiCS-4514 chip made with MEMS technology. What does the gas sensor react to? First of all it detects various harmful gases and volatile organic...
Index: DFR-20378
Index: DFR-20378
Waiting time is about 4-6 weeks.
Regular price €41.58 Price €41.58

Gravity - Analog ORP Sensor Meter Pro - DFRobot SEN0464

The Pro version analog ORP sensor is equipped with a platinum indicator electrode and a silver chloride reference electrode , which provides 24-hour ORP measurement and...
Index: DFR-20674
Index: DFR-20674
Unavailable
Regular price €147.18 Price €147.18