Sunlu FilaDryer S2 - filament dryer

Index: SLU-20878
Sunlu device, enabling the appropriate preparation of the filament for the printing process. The main task of the FilaDryer S2 is to remove moisture that may accumulate on the printing material over time. It causes, among others adhesion problems between layers. FilaDryer S2 also allows the storage of thermoplastic fibers in appropriate conditions.
Sunlu FilaDryer S2 - filament dryer
€66.50
€54.07 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Sunlu

Product description: Sunlu FilaDryer S2 - filament drying system

Sunlu device, enabling the appropriate preparation of the filament for the printing process. The main task of the FilaDryer S2 is to remove moisture that may accumulate on the printing material over time. It causes, among others adhesion problems of layers. FilaDryer S2 also allows the storage of thermoplastic fibers in appropriate conditions.

Our store's offer also includes a large selection of filaments . The dryer allows you to place a spool of maximum dimensions: 210 x 85 mm. It is compatible with with Fiberlogy filaments (filaments sold separately).

Sunlu FilaDryer S2 - filament drying system

Sunlu FilaDryer S2 - filament drying system .

The device allows you to store a spool of filament

The device allows you to store a spool of filament .

Simple operation

The Sunlu FilaDryer S2 is equipped with buttons and a readable display that allow you to set the appropriate temperature and time of operation. The device allows you to store the filament at a temperature of 35 ° C to 70 ° C. The closed chamber protects the printing material against moisture and dust from settling on the fibers. The rotating spool holder allows the filament to be directly fed into the ectruder.

Advantages of Sunlu FilaDryer S2

  • It can be used with a wide range of filaments : PLA, PLA +, Wood, PETG, PVB, ABS, HIPS, PVA, ASA, TPU, PMMA, PA, PC.
  • It can be used to dry both the currently used printing material and to store the spools.
  • The device is easy to use. It also has an interesting modern look.
  • Thanks to the protection of the thermoplastic fibers against moisture, the resulting prints have increased layer adhesion. The surface of the finished models is thus smoother.

The set includes a power supply The set includes a power supply .

Sunlu FilaDryer S2 with a spool of PETG Devil Design filament inside

Sunlu FilaDryer S2 with a spool of PETG Devil Design filament inside .

Filament drying system specification

  • Producer: Sunlu
  • Supply voltage (output): 24 V (+/- 1.2 V) / 2 A
  • Maximum current: 1.9 A
  • Maximum Working Power: 48W
  • Standby power consumption
  • The device supports filaments with a diameter of 1.75 mm and 2.85 mm
  • Compatible filament types: PLA, PLA +, Wood, PETG, PVB, ABS, HIPS, PVA, ASA, TPU, PMMA, PA, PC
  • Maximum dimensions of compatible spools: 210 x 85 mm
  • Drying temperature range: from 35 ° C to 70 ° C
  • LCD display: 6.4 ''
  • Housing color: black
  • Dimensions: 265 x 118 x 274 mm
  • Weight: 980 g

Kit contents

  • Sunlu FilaDryer S2
  • Charger
  • Information leaflet

Package width 27.5 cm
Package height 28.5 cm
Package depth 12 cm
Package weight 1.5 kg

Be the first to ask a question about this product!

Product reviews

Sunlu FilaDryer S2 - filament dryer

4.9/5

Average grade

15

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Pawel 18.03.2024 Confirmed purchase Translated review
It fully meets my expectations
Tomáš 01.03.2024 Confirmed purchase Translated review
The print quality has improved when using the dryer.
Michał 31.10.2023 Confirmed purchase Translated review
I give it 4 out of 5 because in my opinion the product is incomplete. I.e. used in accordance with the instructions, the filament is dried with the humidity that was in it. I don't know why the manufacturer came up with it, but only printing and using the "Sunlu FilaDryer S2 Improvement Wedge" allows the filament to dry properly. Besides, it's a must have for every printer who has a printer from yesterday and probably one expired spool ;)
Itan 28.08.2023 Confirmed purchase Translated review
Quality looks great.
JIŘÍ 24.01.2023 Confirmed purchase Translated review
......
Mirosław 17.01.2023 Confirmed purchase Translated review
Very good
Krzysztof 16.01.2023 Confirmed purchase Translated review
Everything OK - shipping fast and without problems. Good product, works as it should. In case of loading the filament from the top, I recommend printing "Sunlu FilaDryer S2 Improvement Wedge" from printables dot com :-)
Bogdan F. 15.07.2022 Confirmed purchase Translated review
SUPER
Zdeněk B. 22.06.2022 Confirmed purchase Translated review
:-)
Lech S. 21.06.2022 Confirmed purchase Translated review
ok !
Rafał K. 17.06.2022 Confirmed purchase Translated review
Everything is ok, I recommend it and thank you.
Anastasiia 29.05.2024 Confirmed purchase
Nina 29.03.2024 Confirmed purchase
Jadwiga 06.12.2023 Confirmed purchase
Szymon 07.06.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: