USB programmer and debugger for Xilinx devices - Waveshare 6530

Index: WSR-16398 EAN: 5904422344450

A platform that allows you to program and debug Xilinx devices via USB. The device is based on CY7C68013A+FPGA chip, which is compatible with original Xilinx platforms. It supports programming via JTAG, Slave-Serial and SPI interfaces. It works with 1.5 V / 1.8 V / 2.5 V / 3.3 V / 5 V.

USB programmer and debugger for Xilinx devices - Waveshare 6530
€38.50
€31.30 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Waveshare

Product description: USB programmer and debugger for Xilinx devices - Waveshare 6530

A platform that allows you to program and debugXilinxdevices via USB. The device is based onCY7C68013A+FPGAchip, which is compatible with original Xilinx platforms. It supports programming viaJTAG, Slave-Serial and SPIinterfaces. It works with 1.5 V/ 1.8 V / 2.5 V / 3.3 V / 5 V.

Programator i debugger dla XilinxProgrammer and debugger for Xilinx devices.

Main features of the programmer and debugger

  • Based on CY7C68013A+FPGA.
  • Enables programming of any Xilinx FPGA / CPLDS / ISP PROM device.
  • Supports programming by JTAG / Slave-Serial / SPI.
  • Supports such voltages as: 1.5 V / 1.8 V / 2.5 V / 3.3 V / 5 V.
  • Allows to change the clock frequency, automatically adjusts the frequency of Xilinx software.
  • It automatically updates the software, so it will support next Xilinx devices.
  • Antistatic and multi-layer signal isolation.
  • Included are adapters and cables for connection to an official board or circuit.
  • Supports software such as:
    • Xilinx ISE
    • iMPACT
    • ChipScope
    • Vivado
  • Compatible devices:
    • Xilinx FPGA: UltraScale / 7 series / Zynq / Kintex / Virtex / Artix / Spartan, etc.
    • Xilinx CPLD: XC9500 / XC9500XL / XC9500XV / CoolRunner XPLA3 / CoolRunner-II, etc.
    • Xilinx PROM: XCF00S / XCF00P / XL, etc., etc.
  • It has status LEDs:
    • Red: USB connected
    • Yellow: USB connected and Vref (target board) is powered

How to connect the programmer?

The programmer should be connected to the PC via USB and to the target board via the selected interface with a suitable cable. Below is a drawing of the pins layout.

Rozkład pinów

Pin layout.

Set contents

  • USB programmer and debugger for Xilinx
  • JTAG adapter
  • USB cable
  • 7-wire cable with 8-pin connector
  • 6-wire cable with 8-pin connector
  • JTAG 14-pin cable, raster 2.54 mm
  • JTAG 14-pin cable, 2 mm raster
  • JTAG 10-pin cable, raster 2.54 mm

Akcesoria w zestawie

Accessories included.

Package width 9.5 cm
Package height 13.6 cm
Package depth 4.1 cm
Package weight 0.185 kg

Be the first to ask a question about this product!

Product reviews

USB programmer and debugger for Xilinx devices - Waveshare 6530

4.8/5

Average grade

5

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: