Description
Development board allows us to study theFPGAchips. The module is equipped with XC3S500E with116I/O. The board is configured through theJTAGinterface. It also has buttons, LEDs, etc.
The module has no power connector, it is powered from the soldered connectors. The supply voltage is 1.15 V to 3.3 V. It has a built in voltage regulator. Raster of the connectors is 2 mm.
The manufacturer provides a detailedmanual. |
Specification
- Diagram FPGA: EP4CE6E22C8Nin a case QFP208
- Generator frequency: 50 MHz
- Working voltage: 1,15 V to 3.3 V
- RAM: 360 kbps
- DCMs: 4
- Configuration via JTAG
- 4 led
- 2 buttons
- 116 pins I/O for the purposes defined by the user
- Terminal raster: 2 mm
- Equipped with a voltage regulator
Useful links |