Description
Digital module with optical sensor, with a gap of 6 mm. The module has a built-in comparator, because of this, the output is a digital signal. Supply voltage is from 3.3 V to 5 V. Together with the disc of the encoder, it can be used as a device counting the pulses, etc.
The module is used in setsAlphaBot.
Sensor maintenance
The sensor has a digital output that is to be attached to the pin of the microcontroller, e.g.Arduino. After power-up, at the outputs will be logical statuses 0 or 1.
| Pin | Description |
|---|---|
| VCC | Supply voltage is from 3.3 V to 5 V. |
| GND | The ground of the system. |
| DOUT | The digital output transmits the signal 0 and 1. |
|
The product is compatible with Arduino The manufacturer has prepared a user guide along witha sample program for Arduino and STM32. |
Specification
-
Supply voltage: from 3.3 V to 5 V
- Slot width: 6 mm
- Communications: 0/1 digital signal
- Module dimensions: 27 x 19 x 15 mm
Useful links |
