Product description: Devil Design HIPS 1.75 mm 0.8 kg - Black
HIPS filament used as a 3D printer insert . The insert diameter is 1.75 mm. The kit contains 0.8 kg net of black filament. Requires a heated bed . Due to similar properties, ABS supports the model. After printing , immerse the model in a HIPS dissolving solution to ensure the ABS remains intact. The dissolving process takes 8 to 24 hours. Store away from moisture.
Our range of filaments also includes other materials and colors.
Filament Devil Design HIPS 1.75 mm 0.8 kg - Black.
The filament is wound on a spool, vacuum-sealed with a moisture absorber. The spool contains a net weight of 0.8 kg . It can be used in all FFF printers not protected against the use of material from a third-party supplier or open-source designs. HIPS filament can be used as a base or support material, including for ABS in dual-head printers. HIPS is easily machined, such as by grinding or drilling, and is soluble in D-limonene solution.
Properties of HIPS filament
- Biodegradable
- Support material for ABS
- It dissolves in the solution intended for this material.
Suggested filament printing parameters
| Head temperature | From 230°C to 240°C |
| Table temperature | From 90°C to 100°C |
| Print cooling | Not recommended |
| Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Technical specifications and physical properties of Devil Design HIPS filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Filament roundness | +/- 0.02 mm |
| Material surface | Satin |
| Material shrinkage | Big |
| Product weight | 0.8 kg |
| Material | HIPS |
| Weight of empty spool | ~ 250 g |
| Spool diameter | 200 mm |
| Spool width | ~ 70 mm |
| Mounting hole diameter | 52 mm |
| Packaging | Cardboard with print |
| Package dimensions | ~ 205 x 205 x 80 mm |
| Vacuum packaging | Yes |
| Moisture absorber | Yes |
Useful links |
