Product description: 8-channel potentiometer - STM32F030F4P6 - Unit expansion module for M5Stack development modules
Module in the form of a Unit type extension for M5Stack development modules equipped with 8 potentiometers and the STM32F030F4P6 control system. The potentiometer has a rotation angle of 280° and can be rotated to the left and to the right . Each potentiometer has one RGB LED, and in the extreme part of the module there is also a mechanical switch that allows you to turn the LEDs on and off. The Unit extension uses the I2C interface to communicate with connected devices.
8-channel potentiometer - STM32F030F4P6 - Unit expansion module for M5Stack development modules.
The manufacturer has also prepared a user's guide , in which you will find a diagram of the system and sample program codes - check it out!
The module allows you to control the robot joint with many degrees of freedom.Special features of the module
- 8 rotary potentiometers and 8 RGB LEDs on one board
- Rotation angle equal to 280°
- Onboard 5V -> 3.3V LDO voltage regulator ME6210A33M3G
- Supported development environments Arduino, UIFlow (Blockly, Python)
- 2 LEGO compatible mounting holes
Suggested use of the module
- Multi-degree-of-freedom robot joint control
- Music volume control
- Multi-channel lighting control
Technical Specifications
- Module type: potentiometer
- Number of potentiometers: 8
- Built-in control chip: STM32F030F4P6
- Operation signaling: RGB LEDs
- Number of LEDs: 8
- LED type: SK6812-3535
- Input voltage: 5V
- Communication interface: I2C
- I2C interface address: 0x43
- Dimensions: 128 x 24 x 22.7mm
- Weight: 34.9g
Kit contents
- 8-channel potentiometer - STM32F030F4P6 - Unit expansion module for M5Stack development modules
- Connection cable with Grove connector - 5 cm
Components included in the set.
