Description: Filament Print-Me Swift PETG 1.75 mm 0.25 kg - Green Bottle
The Swift PETG filter is a Green Bottle cartridge for 3D printers. The net weight of the filament wound on a spool is 250 g. Anyone who is not familiar with the subject of additive technologies is perfectly aware that for a printed model to have good detail and durability, it must be made of high-quality material. Therefore, it is worth betting on the products of proven manufacturers.Swift PETGis a material that ensures high quality of three-dimensional prints. It is distinguished by its versatile use,intensive colour andrelative ease ofprinting.Thanks toSwift PETG Green Bottle with a diameter of 1.75 mm, you will be able to create models of varying degrees of complexity. The filter is suitable for most popular 3D printers for amateur home use and more.
In our offer of filaments you will also find other materials and colors.
You'll find more types of Print-Me filaments indifferentcolours, so you're sure to find exactly what you're looking for here. Our product range consists of carefully selected cartridges for different applications - check out our other proposals! All materials are available from us at favourable prices.
Properties of Swift PETG
- Excellent adhesion between layers
- Material for more advanced users
- Glossy surface after printing
- Slight flossing effect
- Small contraction
- High dimensional accuracy of the printed component
- High transparency
- High mechanical strength
Suggested print parameters for filament
| Head temperature | From 220°C to 250°C |
| Table temperature | From 60°C to 80°C |
| Cooling the printout | From 50% to 100% |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the Print-Me Swift PETG pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,05 mm |
| Material surface | Gloss |
| Density | 1.15 g/cm3 |
| Thermal resistance | 70°C |
| Shore hardness | 74D |
| Impact resistance for V notch | 012 J/cm2 |
| Young's module | 2304 MPa |
| Retraction | +/- 6 mm |
| Nozzle diameter | ≥ 0,2 mm |
| Print speed | From 30 to 60 mm/s |
| Material contraction | 0,1 % |
| Product weight | 250 g net |
| Material | PETG |
| Vacuum packing | Yes |
| Moisture absorber | Yes |
Useful links |
