- New
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
Drivers for DC motors - Strona 3
Loading...
Grove - PCA9685 - 16-channel server driver, 12-bit PWM I2C
A 16-channel PWM generator useful when there is no microcontroller output. It allows, among others: controlling servomechanisms, adjusting motor speed or changing LED...
Index: SEE-13511
Index: SEE-13511
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
DFRobot HR8833 - two-channel driver for DC 10V/1,5A motors
A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.
Index: DFR-06934
Index: DFR-06934
DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.
Index: DFR-07421
Index: DFR-07421
TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450
SparkFun module with two channel DC motor driver. It is powered from 2.7 V to 15 V . Continuous current per channel is 1.2 A. It has soldered goldpin connectors.
Index: SPF-10666
Index: SPF-10666
Grove - L298N - two-channel motor controller 15V / 1A
Grove series module equipped with a two-channel H-bridge L298N , controlled by ATmege 8L. The circuit allows to regulate the direction of rotation of motors with maximum...
Index: SEE-11320
Index: SEE-11320
TB67H420FTG Dual/Single Motor Driver Carrier - Pololu 2997
Single channel DC motor controller. Continuous current per channel 2.6 A (momentary up to 5 A). Supply voltage from 4.5 V to 28 V .
Index: PLL-12059
Index: PLL-12059
DFRobot L298N - two-channel motor controller - 12V / 2A
Two-channel DC motor controller based on L298N system. Supply voltage is up to 12 V. Maximum current per channel is 2 A. The system has a built-in voltage regulator 5 V, to...
Index: DFR-13754
Index: DFR-13754
Grove - L298P - two-channel motor driver 12V/2A - Seeedstudio 105020093
A module with an L298P motor controller that supports two DC motors or one stepper motor. The voltage supported by the controller is between 6 V and 12 V and the continuous...
Index: SEE-16906
Index: SEE-16906
RoboClaw 2x15A USB V6B - dual channel 34V/15A motor controller - Pololu 3683
The RoboClaw module is an advanced DC motor controller that supports two motors with a maximum continuous current of 15 A per channel (30 A peak) and a voltage from 6 V...
Index: PLL-25109
Index: PLL-25109
RoboClaw 2x30A USB V6B - dual channel 34V/30A motor controller - Pololu 3684
The RoboClaw module is an advanced, dual-channel DC motor driver capable of delivering 30 A of continuous current per channel, with a supply voltage of 6 V to 34 V....
Index: PLL-25110
Index: PLL-25110
VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451
ST's VNH5019 module operates from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).
Index: PLL-00456
Index: PLL-00456
two-channel h-bridge - SN754410NE
H-bridge - controller based on MOSFET transistors supplied with voltage from 4.5 to 36 V with current capacity up to 2 A.
Index: UCC-02153
Index: UCC-02153
DC Motor Driver Module - four channel - hat for Raspberry Pi Pico - Waveshare 19764
DC motor controller in the form of a HAT overlay for Raspberry Pi Pico . Manufactured by Waveshare, it features the TB6612FNG chip to control up to four DC motors, and the...
Index: WSR-20548
Index: WSR-20548
M3S550 - triple motor controller DC 22V/1,7A - for Arduino - Pololu 5069
Shield designed to work with Arduino, which allows you to control three DC motors powered with voltage from 1.8 V to 22 V. It communicates via the I2C interface . The...
Index: PLL-23648
Index: PLL-23648
TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713
Pololu module with dual channel DC motor driver. It is powered from 4.5 V to 13.5 V. The continuous current per channel is 1 A, when both channels are connected the value...
Index: PLL-00032
Index: PLL-00032
TB6612FNG - two-channel motor controller
Two-channel H-bridge. Continuous current per channel 1,2 A momentary up to 3,2 A. Supply voltage up to 15 V. Housing SSOP-24 (SMD).
Index: UCC-00495
Index: UCC-00495
DRV8833 - two-channel motor controller 10,8V/1,2A - Pololu 2130
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 2 A). Power supply from 2.7 to 10.8 V.
Index: PLL-00546
Index: PLL-00546
MC33926 - two-channel 28V/2,5A motor controller
Module with two-channel driver of DC motors MC33926 working with voltages from 5 V to 28 V. The maximum continuous output current per channel is 2.5 A.
Index: PLL-00751
Index: PLL-00751
DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 1.5 A). Power supply from 2.0 to 11 V.
Index: PLL-00851
Index: PLL-00851
DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511
Dual channel DRV8835 module operates with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The chip can be connected directly to Arduino board.
Index: PLL-02671
Index: PLL-02671
DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.
Index: PLL-02695
Index: PLL-02695
G2 High Power 24v13 - single channel motor controller 40V/13A - Pololu 2992
Single-channel high-performance DC motor controller. Continuous current per channel is 13 A (momentary up to 100 A), motor supply voltage from 6.5 V to 40 V , logical part...
Index: PLL-05121
Index: PLL-05121
L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the...
Index: MOD-08227
Index: MOD-08227