- New
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
Drivers for DC motors - Strona 2
Loading...
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
MOSFET driver with N channel - for motors, solenoids, LEDs - STEMMA JST PH 2mm - Adafruit 5648
N-channel MOSFET (also called transistor) driver from Adafruit, featuring the AO3406 chip. The module can be supplied with a voltage from 3 V to 30 V and controlled by a...
Index: ADA-22539
Index: ADA-22539
DRV8871 Brushed DC Motor Driver Breakout 45V/3,6A - Adafruit 3190
Single-channel DC motor controller . Continuous current per channel 2 A (momentary to 3.6 A). Supply voltage from 6.5 V to 45 V.
Index: ADA-07043
Index: ADA-07043
M2T550 - dual motor controller 22V/1,6A - I2C interface - Pololu 5079
The controller from Pololu is based on the M2T550 system enabling the operation of two DC motors . It uses the I2C interface for communication. Works with engines powered...
Index: PLL-23643
Index: PLL-23643
MC33926 - single-channel 28V/2,5A engine controller - Pololu 1212
Module with single-channel MC33926 operating with voltages from 5 V to 28 V. The maximum continuous output current is 2.5 A.
Index: PLL-01322
Index: PLL-01322
DRV8833 DC/Stepper Motor Driver Breakout Board - Adafruit 3297
Dual channel DC motor controller. Continuous current per channel 1.2 A (momentary up to 2 A). Supply voltage ranges from 2.7 V to 10.8 V.
Index: ADA-07665
Index: ADA-07665
Cytron Shield-MDD10 - two-channel DC motor driver - 7V-30V/10A - Shield for Arduino
A module that allows you to control two DC motors or one stepper motor using Arduino. The overlay allows you to adjust the direction and speed of motors with current...
Index: CTN-14815
Index: CTN-14815
DRV8876 - single channel 37V/1,3A motor driver - Pololu 4036
Single-channel DC motor controller manufactured by Pololu. Equipped with the DRV8876 system, it is supplied with the voltage from 4.5 V to 37 V. The continuous current per...
Index: PLL-21360
Index: PLL-21360
M2U550 - dual motor controller 22V/1,6A - UART interface - Pololu 5081
A controller from Pololu based on the M2U550 system enabling the operation of two DC motors . It uses the UART TTL interface for communication. Works with engines powered...
Index: PLL-23642
Index: PLL-23642
M1U550 - single motor controller 22V/1,8A - UART interface - Pololu 5077
A controller from Pololu based on the M1U550 system enabling operation of a DC motor . It uses the UART TTL interface for communication. Works with engines powered by...
Index: PLL-23644
Index: PLL-23644
M3S550 - triple motor controller DC 22V/1,7A - for Arduino - soldered - Pololu 5068
Shield designed to work with Arduino, enabling control of three DC motors . It uses the I2C interface for communication. The controller supports motors powered with voltage...
Index: PLL-23649
Index: PLL-23649
- Reduced price
- SPECIAL OFFERS
The 4EncoderMotor V1.1 module is a 4-channel motor driver with encoders , based on STM32 and BL5617 . It supports I2C communication and enables precise motor control,...
Index: MSS-25343
Index: MSS-25343
H2 High-Power 36v11 CS - single channel 60V/11A DC motor controller - Pololu 2993
High-current H-bridge DC motor driver with MOSFET transistors. Supports voltages from 5V to 60V and provides up to 11A continuous current without the need for a radiator....
Index: PLL-25651
Index: PLL-25651
TB6552FNG - two-channel motor controller
Two-channel bridge H. Continuous current per channel 0.8 A, temporary to 1 A. Maximum supply voltage 15 V. SSOP-16 (SMD) housing.
Index: UCC-00777
Index: UCC-00777
- Reduced price
- SPECIAL OFFERS
Cytron MD30C - single-channel 30V / 30A motor controller
Single channel DC motor controller. Continuous current per channel 30 A (momentary 80 A). Supply voltage from 5 V to 30 V.
Index: CTN-12402
Index: CTN-12402
TB6612 Motor Shield - 4x DC motor driver - 12V/1,2 A - Shield for Arduino
The module allows you to control four DC motors (DC), with two stepper motors or two servos using Arduino kits. The system allows you to adjust the direction and speed of...
Index: GRL-12811
Index: GRL-12811
24V/10A PWM/USB motor controller - DFRobot DRI0050
DC motor or LED strip driver, controlled via PWM interface. The driver allows you to adjust the speed of the motor or the brightness of the LED strip through the...
Index: DFR-20683
Index: DFR-20683
Motor Driver Carrier Board - 2x3A DC motor driver - carrier board for UNIHIKER - DFRobot DFR1136
A carrier board that allows you to control two DC motors with a maximum current of 3 A each, designed for the UNIHAKER minicomputer. It uses a connector with an inclined...
Index: DFR-25397
Index: DFR-25397
Haptic Motor Driver - DRV2605L - SparkFun ROB-14538
SparkFun module with DRV2605L haptic motor controller. It can handle ERM and LRA motors. Operates from 2 V to 5.2 V. Communicates over I2C bus.
Index: SPF-08219
Index: SPF-08219
Grove - PCA9685 - 16-channel server driver, 12-bit PWM I2C
A 16-channel PWM generator useful when there is no microcontroller output. It allows, among others: controlling servomechanisms, adjusting motor speed or changing LED...
Index: SEE-13511
Index: SEE-13511
SparkFun Ardumoto - Motor Driver Shield - L298 - hat for Arduino - SparkFun DEV-14129
SparkFun Ardumoto is a shield designed for use with Arduino that allows you to control up to two DC motors . It is equipped with the popular L298 H-bridge, thanks to...
Index: SPF-23852
Index: SPF-23852
- Sale
- SPECIAL OFFERS
DFRobot HR8833 - two-channel driver for DC 10V/1,5A motors
A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.
Index: DFR-06934
Index: DFR-06934
DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.
Index: DFR-07421
Index: DFR-07421
TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450
SparkFun module with two channel DC motor driver. It is powered from 2.7 V to 15 V . Continuous current per channel is 1.2 A. It has soldered goldpin connectors.
Index: SPF-10666
Index: SPF-10666