- Reduced price
- Sale
- Reduced price
- Sale
Drivers for DC motors - Strona 4
Loading...
Cytron Robot Combat Controller URC10 ATmega328P + driver engines 24V/10A compatible with Arduino
Dual-channel DC motor driver. The module can control the direction of rotation, start, stop and speed of the DC motors. Continuous current per 10 A channel (temporary 30 A)....
Index: CTN-12414
Index: CTN-12414
Motor and servo driver for Micro:Bit - Waveshare 15220
Expansion board for module Micro:bit. It allows you to control 2 DC motors and 3 servos through the I2C interface with 12-bit resolution for each channel. It powers the motors...
Index: WSR-13303
Index: WSR-13303
36v4 - High - Power Stepper Motor Driver 50V/6A - Pololu 3730
The DRV8711 stepper motor controller allows you to control one bipolar stepper motor. Powered from 8 V to 50 V, with a maximum current draw of 6 A per coil. Maximum...
Index: PLL-14787
Index: PLL-14787
DRV8256P - single-channel motor controller 48V/1,9A - Pololu 4039
A small, single channel DRV8256E motor driver created by Pololu. The module is powered from 4.5 V to 48 V. Continuous current per channel is 1.9 A (momentary up to 6.4 A...
Index: PLL-20440
Index: PLL-20440
DRV8256E - single-channel motor controller 48V/1,9A - Pololu 4038
A small, single-channel DC motor driver. The DRV8256E module developed by Pololu is powered from 4.5 V to 48 V . Continuous current per channel is 1.9 A (momentary up to...
Index: PLL-20441
Index: PLL-20441
M1T256 - single-channel motor controller 48V/2,2A with connectors - I2C interface - Pololu 5060
A driver based on the M1T256 chip that allows you to control one DC motor using the I2C interface . The module can work with motors supplied with a voltage of 4.5 V to 48...
Index: PLL-22770
Index: PLL-22770
M1T256 - single-channel motor controller 48V/2,2A - I2C interface - Pololu 5061
A driver based on the M1T256 system that allows you to control one DC motor. It uses the I2C interface for communication. The module can work with motors supplied with a...
Index: PLL-22771
Index: PLL-22771
Gravity DFRobot IO Expansion + TB6612FNG 2-channel motor driver 12V/1.2 A - Shield for Arduino
Shield for Arduino which is an extension of the i/O pins and two-channel driver for DC motors TB6612FNG with a voltage of 12 V and performance of 1.2 A per channel. It also has...
Index: DFR-10828
Index: DFR-10828
Arduino Nano Motor Carrier - motor driver for Arduino Nano 33 IoT - ABX00041
An overlay containing a DC motor driver and IMU sensor, designed for the Arduino Nano 33 IoT module. It is designed to help students prototype and create their own projects...
Index: ARD-20396
Index: ARD-20396
Cytron MDD20A - two-channel motor driver 30V/20A
Two-channel DC motor controller. Supply voltage ranges from 6 V to 30 V, maximum current per channel is 20 A at continuous operation and 60 A of instantaneous current . The...
Index: CTN-18881
Index: CTN-18881
Cytron MD25HV - single-channel DC motor driver - 7V-58V / 25A
A set with a single-channel DC motor controller by Cytron, equipped with a rocker switch for changing the direction of rotation and a potentiometer for speed control. The...
Index: CTN-14813
Index: CTN-14813
M1T550 - single motor controller 22V/1,8A - I2C interface - Pololu 5075
A controller from Pololu based on the M1T550 system enabling operation of a DC motor . It uses the I2C interface for communication. Works with engines powered by voltage...
Index: PLL-23645
Index: PLL-23645
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
G2 High Power 18v17 - single channel motor controller 30V/13A - Pololu 2991
Single-channel high-performance DC motor controller. Continuous current per channel is 17 A (momentary up to 100 A), motor supply voltage from 6.5 V to 30 V, logical part...
Index: PLL-05990
Index: PLL-05990
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
TB67H453FTG QFN - 44V/1,1A single channel brush motor driver - Pololu 4972
The TB67H453FTG is a compact brushed motor controller from Toshiba in a QFN package , capable of controlling a single bidirectional DC motor with a voltage from 4.5 V to...
Index: PLL-26474
Index: PLL-26474