SENSORS - Strona 20
Grove - temperature and humidity sensor DHT22 (AM2302)
Module with temperature and humidity sensor with a digital single-wire interface. Measuring range: temperature -40 °C to +80 °C, humidity is from 0% to 100 % RH.DFRobot Gravity - digital barometer, pressure and altitude sensor 1250hPa I2C/SPI 3,3-5,5V
Module with digital barometer from Bosch BMP388. The measurement range is from 300 hPa to 1250 hPa relative accuracy of 8 Pa on approx. 0.5 m of altitude. The system is...6-axis motion sensor - accelerometer and gyroscope - DFRobot SEN0386
Powerful 6-axis sensor combines accelerometer and gyroscope. Allows you to determine the position of an object in space , measure the acceleration and angular velocity....TMP102 - I2C temperature sensor - SparkFun SEN-13314
Module with digital TMP102 thermometer in the range from -40 °C to 125 °C, equipped with I2C interface (TWI). The supply voltage ranges from 1.4 V to 3.6 V.- Reduced price
- Promotion
DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...Vibration sensor - Iduino SE053
A simple vibration sensor with digital output. It is powered with the voltage of 5 V. It has a 3-pin connector.CJMCU SHT10 - digital temperature and humidity sensor
Humidity and temperature sensor powered with the voltage of 3.3 V. Temperature measurement range is from -40 °C to + 123,8 °C, for the humidity is from 0 to 100 % RH.3-axis MMA8452 I2C digital accelerometer - HW-616
A sensor for measuring accelerations in three axes in the range: ± 2g, ± 4 g or ± 8 g. The MMA8452 accelerometer communicates via the I2C bus. It is powered from 1.95 V to 3.6...Oxygen Sensor I2C - DFRobot SEN0322
Sensor designed for measuring O2 concentration in the environment. The DFRobot product is compatible with 3.3 V and 5 V controllers such as Arduino, ESP32 or Raspberry...Grove AHT20 - temperature and humidity sensor - I2C - - Seeedstudio 101990644
The Grove AHT20 is a new generation sensor, enabling even more accurate measurements. The AHT20 has a newly designed ASIC with an improved MEMS semiconductor moisture...NeoPixel rotary encoder - I2C - STEMMA QT / Qwiic - Adafruit 4991
Rotary encoder manufactured by Adafruit. Equipped with SAMD09 chip, uses I2C communication interface. It has STEMMA QT / Qwiic connectors and leads in form of solder fields....IR receiver + wire - Iduino SE027
Simple Iduino module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage of 5 V. It detects a beam at an angle of 90°. Maximum...BleBox Probe - waterproof temperature probe for BleBox sensors - 1m
Temperature probe made in Poland by BleBox . Waterproof probe is designed to be used in sensors thermoBox and saunaBox by BleBox. BleBox Probe allows for temperature...Waterproof probe with temperature sensor DS18B20 - 5m - brown - silicone
Waterproof probe is equipped with a digital thermometer DS18B20 with cable with the length of 5 meters. Version with silicone wire is characterized by the greater strength.Inductive proximity sensor LJ12A3-2-Z / BX 2mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mm. The object detection...Fermion v2.0 - Pulse Oximeter and Heart Rate Monitor - MAX30102 - I2C - DFRobot SEN0344
Sensor module with integrated MAX30102 chip from DFRobot. This is an integrated pulse oximetry biosensor module that allows you to measure heart rate and monitor saturation,...LED RGB strip driver with IR remote - 24 keys
A module that allows you to control the brightness of monochrome panel with LED backlight and brightness and LED RGB color panel. It has lots of preset functions. Equipped...Analog voltmeter - panel 91C16 mini - 250V DC
Analog voltmeter capable of measuring voltage up to 250 V. It has a square case in size 40 x 40 mm. Yhe accuracy CLASS 5.0.Distance sensor, reflective VMA330 - 3,3V/5V - 40cm
The reflective module with IR sensor equipped with digital output. It works with a voltage from 3.3 V to 5 V. The detection of obstacles is in the range of 2 to approx. 40 cm....DFRobot Gravity - digital crash sensor (left)
The module is equipped with limit switch with lever with roller is designed for Arduino. It is supplied with the voltage of 5 V.Grove - BME280 - humidity, temperature and pressure sensor 110kPa I2C 3-5V
The Grove module is equipped with a humidity, temperature and pressure sensor powered with the voltage of 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature:...Totem Rack for Arduino, Raspberry and Grove series modules - TotemMaker TKM-GR1
The Totem Rack is a frame for holding electronic modules , which significantly facilitates their further prototyping . The elements are mounted at an angle of 45 degrees...DFRobot Gravity - analogue meter of the sound level
The sound level meter is compatible with Arduino. For measurements, it uses the circuit instrument and the microphone with a low noise level that allows to accurately measure...