Fermion - ENS160 Air Quality Sensor - DFRobot SEN0515

Index: DFR-20980 EAN: 6959420921690
The sensor module is based on the ENS160 chip, which is used to monitor indoor air cleanliness. It processes IAQ (Indoor Air Quality) data such as TVOC, eCO2, AQI. It is powered by 3.3 V. The module consumes very little power and is very accurate. It communicates via I2C and SPI interfaces.
Fermion - ENS160 Air Quality Sensor - DFRobot SEN0515
€18.00
€14.63 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino Raspberry Pi

Product description: Fermion - ENS160 air quality sensor - DFRobot SEN0515

The sensor module is based on the ENS160 chip, which is used to monitor indoor air cleanliness. It processes IAQ (Indoor Air Quality) data such as TVOC (Total Volatile Organic Compounds), eCO2 (equivalent CO2), AQI (Air Quality Index). It is powered by 3.3 V. The module consumes very little power and is very accurate. It communicates via I2C and SPI interfaces.

The product is compatible with Arduino and Raspberry Pi 4B
The manufacturer has prepared detailed user guide and library for Arduino IDE environment.

Fermion - czujnik czystości powietrza ENS160 - DFRobot SEN0515 Fermion - ENS160 air quality sensor - DFRobot SEN0515.

Fermion - czujnik jakości powietrza ENS160 - DFRobot SEN0515

Connection diagram of ENS160 air quality sensor to FireBeetle ESP32-E. On the left is the connection for I2C and on the right for SPI.

Connection diagram of ENS160 air quality sensor - DFRobot SEN0514

The diagram shows the connection of the module to the FireBeetle ESP32-E board. The sensor uses I2C or SPI interface for communication. Pinouts of ENS160 air cleaner sensor:

  • 3V3: power supply
  • GND: ground
  • SCL: I2C bus clock line
  • SDA: I2C bus data line
  • SCK: SPI bus clock line
  • SDI: SPI bus data input
  • SDO: SPI bus data output
  • CS: SPI selector
  • INT: interrupt pin

Sensor connection to Raspberry Pi

The sensor module is compatible with Raspberry Pi, connect it as per the diagram. The sensor uses I2C or SPI interface for communication.

Features of DFRobot sensor

  • Warm-up time less than 3 minutes, fast data reading
  • Accurate data reading due to high quality circuitry
  • Environmental data reading: TVOC, eCO2, AQI
Schemat podłączenia czujnika jakości powietrza ENS160 do Raspberry Pi. Po lewej stronie znajduje się połączenie dla I2C, a po prawej dla SPI.

Diagram of how to connect the ENS160 air quality sensor to a Raspberry Pi. On the left is the connection for I2C and on the right for SPI.

czujnik jakości powietrza ENS160 - DFRobot SEN0514

ENS160 air quality sensor version V1.0.0.

ENS160 air quality sensor specifications

  • Supply voltage: 3,3 V
  • Current consumption: 29 mA
  • Communication interface: I2C, SPI
  • I2C address: 0x52, 0x53
  • Operating temperature range: from -40°C to 85°C
  • Operating humidity range: from 5% to 95% RH
  • Measuring range eCO2: from 400 ppm to 65000 ppm
  • TVOC measurement range: from 0 ppb to 65000 ppb
  • Module dimensions: 20 x 15 mm

Contents of the kit

  • Fermion - ENS160 Air Quality Sensor - DFRobot SEN0515
  • Gravity cable - 4-pin I2C

Package width 6 cm
Package height 5.5 cm
Package depth 2.5 cm
Package weight 0.007 kg

Be the first to ask a question about this product!

Product reviews

Fermion - ENS160 Air Quality Sensor - DFRobot SEN0515

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Michal 14.11.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: