Original Prusa i3 MK3/S/+ to MK4 upgrade kit - for self-assembly
Index: PSA-23193
- Reduced price
- Promotion
- Reduced price
- Promotion
Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Mistic Red
Index: ROS-24201
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
List of products by brand Pololu - Strona 37
Loading...
A lightweight 1 inch diameter plastic ball in the canopy. Ideal for supporting the front of a two-wheeled robot.
Index: PLL-00476
Index: PLL-00476
- EOL
Ball Caster trio mini - plastic - 3pcs.
Three plastic balls in the canopy. Ideal for supporting the front of a two-wheeled robot.
Index: PLL-00477
Index: PLL-00477
- EOL
Pololu LPR550AL 2-axis XY gyroscope
A sensor for measuring angular speed in two axes: XY. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00492
Index: PLL-00492
- EOL
Pololu LPY550AL 2-axis XZ gyroscope
A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
- EOL
Pololu Step-Down Voltage Regulator BEC 5V 3A
A step-down pulse inverter. Input voltage 5 V to 23 V. Maximum continuous output current 3 A. Output voltage 5 V
Index: PLL-00946
Index: PLL-00946
- EOL
Pololu Zumo - the main board for Arduino
A controller allowing to build a minisumo fighting robot based on the popular Arduino - Uno or Leonardo module.
Index: PLL-01294
Index: PLL-01294
- EOL
Digital distance sensor 30cm 38kHz - module
A small distance sensor operating at 38 kHz at a range up to 30 cm. The sensor is supplied with voltage from the range: 3.3 V - 5 V, average current consumption is 8 mA.
Index: PLL-01353
Index: PLL-01353
- EOL
Digital distance sensor 60cm 38kHz - module
A small distance sensor operating at 38 kHz at a range up to 60cm. The sensor is supplied with voltage from the range: 3.3 V - 5 V, average current consumption is 16 mA.
Index: PLL-01354
Index: PLL-01354
- EOL
MinIMU-9 v3 - accelerometer, gyroscope and magnetometer IMU 9DOF I2C - Pololu module
The sensor allows to measure 9 quantities: acceleration X, Y, Z, magnetic field X, Y, Z and angular speed X, Y, Z. It is a combination of a 3-axis accelerometer, magnetometer...
Index: PLL-02293
Index: PLL-02293
- EOL
AltIMU-10 v3 gyroscope, accelerometer, compass and altimeter - Pololu module
Sensor for measuring acceleration, magnetic field, angular speed and height. It is a combination of a 3-axis accelerometer, magnetometer, gyroscope and barometer. It...
Index: PLL-02418
Index: PLL-02418
- EOL
Pololu Zumo - minisumo robot plow
Polol's fighting educational robot. It is a fully assembled version with micro 75:1 HP motors and line sensors. To start the fun just plug in the Arduino - Uno or Leonardo...
Index: PLL-02419
Index: PLL-02419
- EOL
AltimU-10 v4 - gyroscope, accelerometer, compass and altimeter IMU I2C - Polol module
Sensor for measuring acceleration, magnetic field, angular speed and height. It is a combination of a 3-axis accelerometer, magnetometer, gyroscope and barometer. It...
Index: PLL-02677
Index: PLL-02677
- EOL
LED 8mm RGB WS2811 diode addressable - 10pcs.
The 8 mm RGB WS2811 RGB LED with a built-in driver allows the device to be operated via a 1-wire bus.
Index: PLL-02694
Index: PLL-02694
- EOL
Gear engine 37Dx54L 50:1 + CPR 64 encoder
High power motor with 50:1 gearbox, 200 rpm, 12 kg*cm (1.17 Nm) torque. The device has a quadrature encoder with a resolution of 64 pulses per revolution (after translating...
Index: PLL-02750
Index: PLL-02750
- EOL
Engine 12V 11000RPM with encoder CPR 64 for 27D transmission
Gearless motor, 11000 rpm, torque 0.3 kg*cm (0.02 Nm). Can be used as a replacement for a set with 37D gearbox.
Index: PLL-04025
Index: PLL-04025
- EOL
The module converts RC signals into digital on/off states. The board operates with voltage up to 2.5 to 5.5 V, output current capacity is 20 mA.
Index: PLL-04092
Index: PLL-04092
- EOL
CHRobotics UM7-LT - orientation sensor AHRS 9DoF 3-axis accelerometer, gyroscope and magnetometer
The sensor consists of a 3-axis accelerometer, gyroscope and magnetometer. It can act as an AHRS system. It uses an expanded Kalman filter to calculate flight parameters. The...
Index: PLL-06088
Index: PLL-06088
- EOL
The sensor consists of a 3-axis accelerometer, gyroscope and magnetometer. It can act as an AHRS system. It uses an expanded Kalman filter to calculate flight parameters. This...
Index: PLL-06089
Index: PLL-06089
- EOL