- Reduced price
- Promotion
- Reduced price
- Promotion
AZO Digital DC / DC Step-Up Voltage Regulator PU500 - 12/24V 500W
Index: AZO-10229
- On sale!
- Promotion
DC/AC step-up converter AZO Digital IPS-1200S 24/230V ECO Mode 1200W
Index: AZO-12051
- On sale!
- Promotion
List of products by brand Pololu - Strona 36
Loading...
DC Motor 25Dx48L LP with 9.7:1 Gear 12V 560RPM + encoder CPR 48
Pololu Medium-Power series 9.7:1, 560 rpm, torque 1.0 kg*cm (0.09 Nm). Average current consumption is: 100 mA, maximum to 1.1 A. The device has a quadrature encoder with a...
Index: PLL-06044
Index: PLL-06044
- EOL
Pololu 20Dx42L engine with transmission 56: 1 6V 250RPM
Polol's 56:1 gearbox motor generates 250 rpm, torque is 3.3 kg*cm (0.32 Nm). Powered by 6 V, the average current consumption is approximately 250 mA (max 3300 mA).
Index: PLL-04009
Index: PLL-04009
- EOL
RoboClaw 2x15A USB V5 - two-channel 34V / 15A engine controller
Two-channel DC motor controller. It communicates via microUSB port, UART TTL protocol, analogue signal or RC radio interface. Power supply voltage is from 6 V to 34 V....
Index: PLL-05572
Index: PLL-05572
- EOL
Gear engine 37Dx57L 100: 1 + CPR 64 encoder
High power motor with 100:1 gearbox, 100 rpm, torque 16 kg*cm (1.56 Nm). The device has a quadrature encoder with a resolution of 64 pulses per revolution (after 6533 pulses...
Index: PLL-03426
Index: PLL-03426
- EOL
Gear engine 37Dx54L 70: 1 + CPR 64 encoder
High power motor with 70:1 gearbox, 150 rpm, 14 kg*cm (1.37 Nm) torque. The device has a quadrature encoder with a resolution of 64 pulses per revolution (after translating...
Index: PLL-03427
Index: PLL-03427
- EOL
Gear engine 37Dx52L 30: 1 + CPR 64 encoder
High power motor with 30:1 gearbox, 350 rpm, torque 8 kg*cm (0.79 Nm). The device has a quadrature encoder with a resolution of 64 pulses per revolution (after translation of...
Index: PLL-03271
Index: PLL-03271
- EOL
Geared motor 37Dx52L 19:1 + CPR 64 encoder
High power motor with 19:1 gearbox, 500 rpm, torque 5 kg*cm (0.49 Nm). The device has a quadrature encoder with a resolution of 64 pulses per revolution (after translating 1200...
Index: PLL-01011
Index: PLL-01011
- EOL
A set of magnetic encoders for the Polol 2.7-18V micro-motors - 2 items
A pair of quadrature magnetic encoders, designed for installation in Polol's micro motors. It consists of a Hall sensor board and a plastic rotor with magnets, the set allows...
Index: PLL-02755
Index: PLL-02755
- EOL
Pololu AltIMU-10 gyroscope, accelerometer, compass and altimeter
Sensor for measuring acceleration, magnetic field, angular speed and height. It is a combination of a 3-axis accelerometer, magnetometer, gyroscope and barometer. It...
Index: PLL-01405
Index: PLL-01405
- EOL
Pololu Zumo - minisumo robot - KIT for Arduino
Fighting educational robot for self-assembly. The platform has the ability to mount the Arduino Uno or Leonardo module. The set includes: main board with the possibility of...
Index: PLL-01295
Index: PLL-01295
- EOL
Pololu ACS711 current sensor -25A to + 25A
Current sensor operating in the +/-25 A range based on the Hall effect. The output is analogue voltage. Supply voltage from 3.0V to 5.5V. The product has been replaced by a new...
Index: PLL-00511
Index: PLL-00511
- EOL
Pololu ACS711 current sensor - 12,5A to + 12,5A
Current sensor operating in the +/-12.5 A range based on the Hall effect. The output is analogue voltage. Supply voltage from 3.0 V to 5.5 V. The product has been replaced by...
Index: PLL-00525
Index: PLL-00525
- EOL
MinIMU-9 v2 - accelerometer, gyroscope and magnetometer IMU I2C - Polol module
Sensor for measuring acceleration, magnetic field and angular velocity. It is a combination of a 3-axis accelerometer, magnetometer and gyroscope. It communicates via the I2C...
Index: PLL-00852
Index: PLL-00852
- EOL
L3GD20 3-axis, digital gyroscope
Sensor for measuring angular speed in three axes. It has a choice of measuring range: to ±250 °/s, ±500 °/s, ±2000 °/s. It communicates via the I2C or SPI bus and has an...
Index: PLL-00853
Index: PLL-00853
- EOL
Pololu LSM303DLM 3-axis digital Accelerometer + Magnetometer
The sensor is used to determine the acceleration and magnetic field. The measurement of these quantities is made possible by an integrated 3-axis accelerometer with a...
Index: PLL-00118
Index: PLL-00118
- EOL
Pololu MMA7341LC 3-Axis Analog Accelerometer with reg. 3/9g
3-axis Acceleration sensor operating in the 3G or 11G range. It has an integrated voltage regulator for power supply: 2.2 V - 16 V. The system communicates by means of an...
Index: PLL-00058
Index: PLL-00058
- EOL
Wheel set 42x19mm with encoders
Set of two wheels 42 x 19mm with optical speed sensors (encoders) and motor mounts.
Index: PLL-00066
Index: PLL-00066
- EOL
Reflectance sensor QTR-1A - module
Module with QTR bounce sensor with analogue output. Supply voltage is 5 V .
Index: PLL-00035
Index: PLL-00035
- EOL
Pololu 1246 - MMA7361LC 3-axis analogue accelerator without regulation
3-axis acceleration sensor operating in the 1.5G or 6G range. Powered by voltage from the range: 2.2 V to 3.6 V. It has analog outputs.
Index: PLL-00125
Index: PLL-00125
- EOL
Aluminum mounting hub 6mm 4-40 - 2pcs.
The Hub allows for easy mounting of the wheel on a 6 mm shafted motor. Two pieces included. Product replaced by 6 mm Hub mounting with M3 thread.
Index: PLL-00140
Index: PLL-00140
- EOL
Aluminum mounting hub for 25D motors - 2pcs.
Aluminium lightweight mountings for Polol type 25D motors.
Index: PLL-00155
Index: PLL-00155
- EOL
Aluminum mounting hub 5mm 4-40 - 2pcs
The Hub allows for easy mounting of the wheel on a 5mm shafted motor. Two pieces included.
Index: PLL-00244
Index: PLL-00244
- EOL
Aluminum mounting hub 3mm 2-56 - 2pcs
The Hub allows for easy mounting of the wheel on a 3mm shafted motor. Two pieces included. Product replaced by 3mm Hub mounting with M3 thread.
Index: PLL-00141
Index: PLL-00141
- EOL
Aluminum mounting hub 4mm 4-40 - 2pcs
The Hub allows for easy mounting of the wheel on a 4 mm shafted motor. Two pieces included.
Index: PLL-00245
Index: PLL-00245
- EOL
