Product description: Polol HP 10:1 double-sided shaft motor
Polol's small, lightweight yet powerful motors are used by robot constructors as driving units. The devices can be supplied with voltage up to 9 V, the useful power is over 3 V. The optimum voltage at which the power to strength ratio is best is 6 V. This version has an extended shaft with a length of 4.5 mm, which allows the installation of speed sensors - encoders .
Dimensions of the Polol HP 10:1 motor with a shaft on both sides
The motor body is a 24 x 10 x 12 mm cuboid. Gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.
The drawing shows the dimensions of the Polol micro motor with gearbox.
Accessories for Polol HP 10:1 Polol motor with double shaft
We offer a range of accessories that work with Polol micro motors:
- Fixings
For mounting the motors, special fixtures in white or black are designed . An extended version is also available , as well as an aluminum version with increased strength.
- Engine drivers
Direction and speed control is provided by DC motor controllers. In our offer there are both integrated circuits for self-soldering and ready to connect, cooperating with sets (e.g. Arduino ) modules.
The film from the final run of the winning The robot we have made is equipped with Polol HP micro motors with 10:1 gearbox.
Engine specification Polol HP 10:1 with a shaft on both sides
|
Supply voltage: |
3 V - 9 V |
|
Unloaded current (6 V): |
120 mA |
|
Current at stopped shaft (6 V): |
1600 mA |
|
Speed without load (6 V): |
3000 rpm |
|
Torque (6 V): |
0.3 kg*cm (0.029 Nm) |
|
Gear ratio: |
10:1 |
|
Shaft diameter: |
3 mm |
|
Body dimensions: |
24 x 10 x 12 mm |
|
The weight: |
10 g |
|
Two-sided shaft: |
YES |
Useful links |
