Product description: 12 / 24 V DC remote control - 433.92 MHz - 4 channels.
The radio receiver equipped with relays enables control of 4 devices operating at250 V ACviaNO/NCrelay outputs. The receiver communicates with a frequency of433.92 MHz. There are 2 remote controls included in the set, thanks to which it is possible to control the relay outputs of the module withina range of 100 m.The relays operate with a voltage of12 or 24 V DC.
The appearance of the remotes may differ, the supplier sends different models. The different models of remote controls work the same.
Remote controller outputs 12 / 24 V DC - 433.92 MHz - 4 channel
The connectors in the table are described from above in the order they appear on the controller module. Details can be found in the module manual.
Name | Description |
---|---|
+ |
Power supply connector, 12 or 24 V supply voltage. |
- |
The weight of the system. |
NO_4 |
The contact leads of normally open relay K4. |
COM_4 |
Thecontact ofthecommonrelay K4. |
NC_4 |
Contact output of normally closed relay K4. |
NO_3 |
Contact points normallyopenK3 relay. |
COM_3 |
Common interfaceK3 relay. |
NC_3 |
Contact exitnormally closedK3 relay. |
NO_2 |
Contact points normallyopenK2 relay. |
COM_2 | Common interfaceK2 relay. |
NC_2 | Contact exitnormally closedK2 relay. |
Example of using 12 / 24V DC remote controller - 433.92 MHz - 4 channel
The kit includes:
- 4-channel receiver
- Remote control - 2 pieces
12 / 24 V DC remote control specification - 433.92 MHz - 4 channel
- Power supply voltage: 12 / 24 V DC
- Relay operating voltage: 250 V AC
- Maximum load: 10 A
- Memory: up to 50 pilots
- Receiver sensitivity: -100 dBm
- Realistic range in the open field: up to 100 m
- Quartz stabilisation
- 4 relay outputs
- 3 modes of operation:
- bistable
- monostable
- change of state
- Can be used as an additional gate machine receiver
- Operating temperature: -20°C to 60°C
- Dimensions: 57.5 x 40.5 x 17 mm
Useful links |