- New
- Sale
- Sale
- Sale
- Sale
- Sale
- Sale
Raspberry Pi 3B+ GPIO extensions and HAT - Strona 4
Loading...
Game HAT for Raspberry Pi - Waveshare 15154
Shield that allows you to create miniconsole for games based on minicomputer Raspberry Pi. The module is equipped with buttons, joystick, IPS 3,5" display, speaker and output...
Index: WSR-13589
Index: WSR-13589
Mini Kit 16-channel PWM I2C driver - Servo Hat for Raspberry Pi - Adafruit 2327
Shield for Raspberry Pi to control 16 servos. The system generates the PWM signal with frequency up to 1.6 kHz with 12 bit precision. Board is suitable for connectors of the...
Index: ADA-03283
Index: ADA-03283
RGB LED Hat for Raspberry Pi 3/2/Zero - Waveshare 12725
Shield for the Raspberry Pi containing the LED matrix 8 x 4 consisting of WS2812B LEDs. Each LED can be individually set. The device has dimensions of 65 x 30 mm, it works with...
Index: WSR-08869
Index: WSR-08869
Mini PoE Hat - PoE module for Raspberry Pi 4B/3B+/3B + fan - UCTRONICS U6110
A cap to power Raspberry Pi minicomputers using Power over Ethernet technology. This solution allows you to power the minicomputer using a network cable with an RJ-45...
Index: ACM-16898
Index: ACM-16898
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.
Index: SEE-04451
Index: SEE-04451
Serial Expansion HAT - I2C, UART, GPIO for Raspberry Pi - Waveshare 15667
Shield with system SC16IS752 expanding the minicomputer Raspberry Pi with additional two communication channels of UART and GPIO ports programmable via I2C.
Index: WSR-13469
Index: WSR-13469
Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.
Index: OST-14267
Index: OST-14267
Servo Bonnet - 16-channel PWM I2C driver for Raspberry Pi - Adafruit 3416
Overlay for Raspberry Pi to control 16 servos . The chip generates PWM signals up to 1.6 kHz with 12-bit precision. The board is designed to fit Raspberry Pi 2 x 20...
Index: ADA-11419
Index: ADA-11419
HiFiBerry Digi2 Pro 2.2 - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
HiFiBerry Digi2 Pro 2.2 is a Hat overlay sound card for Raspberry Pi versions 4B / 3B+ / 3 / 2 / B+ / A+ and Zero. Manufactured by HiFiBerry , it features a high quality...
Index: RHF-19063
Index: RHF-19063
Power over Ethernet HAT (D) is an overlay module designed for Raspberry Pi minicomputer 3B+ and 4B versions. Small size and specially designed construction allows to use it also...
Index: WSR-19593
Index: WSR-19593
Arduino Expansion Shield for Raspberry Pi 3B/2B/B+
Shield for Raspberry Pi with ATmega32u4 microcontroller known from Arduino Leonardo. Board allows you to combine the computing power of the Raspberry Pi with control functions...
Index: DFR-03909
Index: DFR-03909
HiFiBerry DAC+ ADC Pro - sound card for Raspberry Pi 4B/3B+/3B
Sound card in the form of a 40-pin overlay for the Raspberry Pi minicomputer version 4B / 3B+ / 3B and above. Overlay powered directly from the minicomputer. It is equipped...
Index: RHF-16965
Index: RHF-16965
Grove Base Kit for Raspberry Pi 4B/3B+ a set for beginners
Grove it modular to create simple projects using components based on the same interface. The kit includes Grove Base Hat + 10 modules and sensors.
Index: SEE-14420
Index: SEE-14420
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
Dual channel CAN BUS Shield for Raspberry Pi - Seeedstudio 103990563
Seeedstudio shield for Raspberry Pi minicomputers. Supports CAN FD interface with transmission speed up to 8 Mb/s , it is a faster and more efficient version of the...
Index: SEE-17684
Index: SEE-17684
Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484
Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
Index: PIM-15898
Index: PIM-15898
Servo pHAT - 16-channel PWM I2C driver for Raspberry Pi - SparkFun DEV-15316
The Servo pHAT overlay from SparkFun allows you to control up to 16 servos via an I2C interface. The chip generates PWM signals up to 1.6 kHz with 12-bit precision ....
Index: SPF-18725
Index: SPF-18725
Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...
Index: PIM-16966
Index: PIM-16966
Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664
Maker pHAT - GPIO extension for Raspberry Pi
PHAT shield for Raspberry Pi, it has signed GPIO pins to facilitate the recognition of individual pins, three programmable buttons, status LEDs for GPIO ports and active buzzer.
Index: CTN-13451
Index: CTN-13451
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
Pan-Tilt HAT for Raspberry Pi - Waveshare 16138
Dedicated to the Raspberry Pi , Pan-Tilt with a camera basket. The module is equipped with an I2C communication interface and a built-in system responsible for PWM motion...
Index: WSR-14430
Index: WSR-14430
Audio Amp SHIM - 3W Mono Amplifier for Raspberry Pi - Pimoroni PIM541
A small SHIM overlay for Raspberry Pi minicomputers made by Pimoroni company. The module acts as a 3 W mono amplifier. There is a terminal connector on the board to connect...
Index: PIM-19067
Index: PIM-19067
PiUART - USB - USB-UART converter for Raspberry Pi - Adafruit 3589
Miniature shield for Raspberry Pi which is also a converter of USB-UART. Connected directly to GPIO pins. The module also has a power switch. It is compatible with Raspberry Pi...
Index: ADA-09816
Index: ADA-09816