iNode MCU Relay - Bluetooth 4.1 and WiFi - for iNode Care Sensor
Index: INO-21204
- On sale!
- Promotion
Start printing in 3D - Creality Ender-3 V3 SE + filament set 3.95 kg
Index: ZES-18608
- On sale!
- Promotion
Raspberry Pi 3B+ GPIO extensions and HAT - Strona 5
Loading...
Traffic HAT - LED module with for Raspberry Pi
Shield for Raspberry Pi, along with three large LEDs, push button and buzzer for self-assembly. It can be programmed in any language for the Raspberry Pi.
Index: SUP-13471
Index: SUP-13471
Serial Expansion HAT - I2C, UART, GPIO for Raspberry Pi - Waveshare 15667
Shield with system SC16IS752 expanding the minicomputer Raspberry Pi with additional two communication channels of UART and GPIO ports programmable via I2C.
Index: WSR-13469
Index: WSR-13469
HiFiBerry DAC Case + Zero i Raspberry Pi Zero - black
Black case for Raspberry Pi Zero and Zero W minicomputer and HiFiBerry DAC+ Zero overlay with external dimensions 80 x 40 x 40 mm.
Index: RHF-11100
Index: RHF-11100
Power over Ethernet HAT (B) is an overlay module designed for Raspberry Pi minicomputer 3B+ and 4B versions . It provides both an 802.3af network connection and supplies...
Index: WSR-19592
Index: WSR-19592
Servo Bonnet - 16-channel PWM I2C driver for Raspberry Pi - Adafruit 3416
Overlay for Raspberry Pi to control 16 servos . The chip generates PWM signals up to 1.6 kHz with 12-bit precision. The board is designed to fit Raspberry Pi 2 x 20...
Index: ADA-11419
Index: ADA-11419
Case for HiFiBerry Digi +, DAC + RCA and Raspberry Pi Model 3/2/B+ - transparent
Transparent case for Raspberry Pi minicomputer in version B2, B3 and B+, as well as the shields from the HiFiBerry Digi+, DAC+ series, with external dimensions of 98 x 67 x...
Index: RHF-09544
Index: RHF-09544
Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.
Index: OST-14267
Index: OST-14267
HiFiBerry Digi2 Pro - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
HiFiBerry Digi2 Pro is a Hat overlay sound card for Raspberry Pi versions 4B / 3B+ / 3 / 2 / B+ / A+ and Zero. Manufactured by HiFiBerry , it features a high quality...
Index: RHF-19063
Index: RHF-19063
Pi Supply On / Off - power switch for Raspberry Pi
Power switch in ATX style for Raspberry Pi. It cuts off the power supply, when the minicomputer is turned off from the operating system level. Module for self-assembly.
Index: SUP-09589
Index: SUP-09589
A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi
The new version of the module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS. Based on Quectel M95, it allows for voice calls, sending SMS...
Index: ITB-10243
Index: ITB-10243
HiFiBerry DAC+ ADC Pro - sound card for Raspberry Pi 4B/3B+/3B
Sound card in the form of a 40-pin overlay for the Raspberry Pi minicomputer version 4B / 3B+ / 3B and above. Overlay powered directly from the minicomputer. It is equipped...
Index: RHF-16965
Index: RHF-16965
1 Wire Pi Zero DS2482 - 1-Wire module for Raspberry Pi
Shield for Raspberry, based on DS2482-100 system, allows you to use the 1-Wire protocol. The module provides conversion to the I2C interface. It has built-in RJ12 connector,...
Index: ABE-11721
Index: ABE-11721
HiFiBerry DAC+ DSP - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with 4-channel amplifier Beocreate and the digital signal DSP processor. It is used in the device of the...
Index: RHF-13084
Index: RHF-13084
ATSAMD09 Seesaw I2C - extension for Arduino and Raspberry Pi - Adafruit 3657
Seesaw ATSAMD09 is a universal framework transducer which expands the number of pins for microcontrollers or microcomputers with I2C interface. It extends the board with...
Index: ADA-10319
Index: ADA-10319
IO Pi Zero 32 - expander for Raspberry Pi - 32 I / O pins
Shield for Raspberry is based on a system PCA9535 adding 32 pins of I/O to minicomputer. It connects via the I2C bus. The module has selectable address so you can do cascade...
Index: ABE-11717
Index: ABE-11717
Power over Ethernet HAT (D) is an overlay module designed for Raspberry Pi minicomputer 3B+ and 4B versions. Small size and specially designed construction allows to use it also...
Index: WSR-19593
Index: WSR-19593
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484
Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
Index: PIM-15898
Index: PIM-15898
ADC-DAC Pi Zero MCP3203 + MCP4822 - A/C and C/A converter 12-bit SPI - overlay for Raspberry Pi
Module with high precision converter of A/C and C/A in the form of shields for GPIO connectors of Raspberry Pi. It features 2 12-bit channels of the analog outputs and 2...
Index: ABE-11719
Index: ABE-11719
Maker pHAT - GPIO extension for Raspberry Pi
PHAT shield for Raspberry Pi, it has signed GPIO pins to facilitate the recognition of individual pins, three programmable buttons, status LEDs for GPIO ports and active buzzer.
Index: CTN-13451
Index: CTN-13451
HiFiBerry DAC+ RCA light - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device of high-quality, the ESS DAC has a resolution of 24-bits, it...
Index: RHF-04876
Index: RHF-04876
- Reduced price
- Promotion
Servo pHAT - 16-channel PWM I2C driver for Raspberry Pi - SparkFun DEV-15316
The Servo pHAT overlay from SparkFun allows you to control up to 16 servos via an I2C interface. The chip generates PWM signals up to 1.6 kHz with 12-bit precision ....
Index: SPF-18725
Index: SPF-18725
JustBoom Digi Zero - sound card for Raspberry Pi Zero
Shield for Raspberry Pi Zero with high quality S/PDIF interface. It is used in the device, system has a resolution of 24 bit with the clock speed of 192 kHz. It has a...
Index: SUP-09579
Index: SUP-09579
Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664