- New
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Raspberry Pi 3B+ GPIO extensions and HAT - Strona 3
Loading...
MSX Proto Hat for Raspberry Pi 4B/3B+/3B/2B
Board allows for self-creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MSX-04552
Index: MSX-04552
RPi Relay Board (B) IC Test Board - Waveshare 15275
Shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of up to 16 servos. It communicates via I2C interface and is based on PCA9685 system.
Index: WSR-13309
Index: WSR-13309
Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...
Index: PIM-10620
Index: PIM-10620
Breakout Pi Plus - prototype board for Raspberry Pi
Board allows for self-creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer. It has led-out pins - separately in groups,...
Index: ABE-11710
Index: ABE-11710
Li-Ion Battery HAT for Raspberry Pi - Waveshare 15141
Panel based on the system SW6106, enables powerring the Raspberry Pi using the rechargeable Li-Ion battery 14500, which makes the device portable. The device can also be used...
Index: WSR-13459
Index: WSR-13459
HiFiBerry DAC+ RCA Zero for 4B/3B+/3/2/B+/A+/Zero
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device, the converter of quality ESS DAC has a resolution of...
Index: RHF-07482
Index: RHF-07482
THT 26pin prototype board with screw connectors for Raspberry Pi
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer. It has soldered screw connections and goldpin...
Index: MOD-05662
Index: MOD-05662
HiFiBerry Amp2 amplifier of class D 60 W for Raspberry Pi 4B/3B+/3B/2/B+/A+
Cap type Hat for Raspberry version 4B, 3B+, 3B, 2B, A+, B with a built-in class D amplifier with power of 60 W. The device supports speakers with an impedance of 4 Ω to 8 Ω,...
Index: RHF-09886
Index: RHF-09886
RTC DS1307 I2C - real-time clock - SparkFun BOB-12708
Module with real time clock and backup battery power. It allows you to read the time in hours, minutes, seconds, and dates: month, day, year. The communication interface is an...
Index: SPF-02405
Index: SPF-02405
- On sale!
- Promotion
Argon ONE M.2 SATA expansion board - for Raspberry Pi 4B
Argon One M.2 is an expansion board for Argon One cases. It allows you to run your Raspberry Pi using an M.2 SATA SSD , which provides faster boot up and more capacity . It...
Index: ARG-18766
Index: ARG-18766
HiFiBerry DAC2 Pro - sound card for Raspberry Pi 4B/3B+/3B
High quality sound card with digital-analogue and analogue-digital converter for Raspberry Pi 4B/3B+/3B. It is equipped with a Burr-Brown 192 kHz / 24-bit converter. On the...
Index: RHF-18129
Index: RHF-18129
Raspberry Pi DAC Pro - sound card for Raspberry Pi 4B/3B+/3B
Raspberry Pi DAC Pro is based on a Burr Brown PCM5242 32-bit / 384 kHz converter , allowing for Full HD 24-bit / 192 kHz audio playback. The module is equipped with two...
Index: RPI-18616
Index: RPI-18616
NB-IoT HAT -GSM SIM7020E - Hat for Raspberry Pi 4B/3B+/3B/2B/Zero - Waveshare 15936
NB-IoT overlay for Raspberry Pi, which allows for creating GSM network connections . Supports communication protocols such as LWM2M/COAP/MQTT . Communicates via serial...
Index: WSR-14779
Index: WSR-14779
A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi - assembled
The module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS standard. It allows for voice chat, sending SMS messages. On the board are: two...
Index: RPI-05405
Index: RPI-05405
OnOff SHIM - on / off switch - overlay for Raspberry Pi
OnOff SHIM is a shield for the Raspberry Pi, mounted on the GPIO connectors. After disconnecting the power supply to the micro USB port on the shield, you can turn on and off...
Index: PIM-10633
Index: PIM-10633
HiFiBerry DAC+ RTC - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device of high-quality, DAC Burr-Brown chip has a resolution of 24...
Index: RHF-12131
Index: RHF-12131
HiFiBerry Digi + standard - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
Hat type overlay for Raspberry versions 4B, 3B+, 3B, 2B, A+, B, Zero with high quality S/PDIF interface and optical connector. The chip used in the device has 24-bit resolution...
Index: RHF-04872
Index: RHF-04872
L76X Multi-GNSS HAT - GPS/BDS/QZSS for Raspberry Pi 4B/3B+/3B/2B/Zero - Waveshare 16193
The GNSS overlay for Raspberry Pi and Jetson Nano minicomputers supports Multi-GNSS systems: GPS, BDS and QZSS. The main advantages of the module are fast positioning, high...
Index: WSR-14783
Index: WSR-14783
ADC 16-bit converter - 4-channel ADS1115 - overlay for Raspberry Pi
Shield for Raspberry Pi with analog-digital converter of 16-bit accuracy and a small package MSOP-10. It has programmable data transfer speed from 8 to 860, 4 analog inputs and...
Index: MOD-09861
Index: MOD-09861
UPS HAT for Raspberry Pi Zero - DFRobot DFR0528
A cap designed for the Raspberry Pi Zero , serving as an emergency power supply in the event of a mains power failure. The module is also compatible with other versions of...
Index: DFR-15714
Index: DFR-15714
The Power over Ethernet HAT (C) is a module in the form of a HAT overlay that is designed for the Raspberry Pi. It is compatible with 3B+ and 4B versions of the minicomputer. It...
Index: WSR-18771
Index: WSR-18771
Mini Kit 16-channel PWM I2C driver - Servo Hat for Raspberry Pi - Adafruit 2327
Shield for Raspberry Pi to control 16 servos. The system generates the PWM signal with frequency up to 1.6 kHz with 12 bit precision. Board is suitable for connectors of the...
Index: ADA-03283
Index: ADA-03283
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Game HAT for Raspberry Pi - Waveshare 15154
Shield that allows you to create miniconsole for games based on minicomputer Raspberry Pi. The module is equipped with buttons, joystick, IPS 3,5" display, speaker and output...
Index: WSR-13589
Index: WSR-13589