- New
Air quality / dust sensor PM1.0 / PM2.5 / PM10 - PMS3003 - 5 V UART
Index: DNG-13442
- Reduced price
- Sale
- Sale
- Sale
Raspberry Pi 3B+ GPIO extensions and HAT - Strona 2
Loading...
TV HAT tuner DVB-T - module with decoder for Raspberry Pi 4B/3B+/3B/Zero
Shield for Raspberry Pi which consists to the tuner of the terrestrial television. It enables the reception of all available, uncoded channels of digital terrestrial...
Index: RPI-13066
Index: RPI-13066
The module with the HAT shield for Raspberry Pi is equipped with eight HLS8L relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system...
Index: WSR-13301
Index: WSR-13301
Shield for Raspberry Pi with e-paper display of 2.13 " with a resolution of 250 x 122 px. It is connected directly to GPIO pins.
Index: WSR-09097
Index: WSR-09097
LTE GPS HAT - LTE / GPRS / GPS SIM7600E-H - for Raspberry 4B/3B+/3B/2B/Zero - Waveshare 14952
Shield for Raspberry Pi that allows you to send text messages and create calls in the GSM network. It also has a GPS module. It supports LTE CAT4 up to 150 Mbps. It...
Index: WSR-12533
Index: WSR-12533
Raspberry PI 4/3/B+/2 GPIO Expansion Board E1 - blue
The board provides the connection of the three modules to each of the GPIO pins of the Raspberry Pi. It has 3 rows of goldpin connectors, 40 pieces in each.
Index: MOD-07149
Index: MOD-07149
Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....
Index: SPF-04290
Index: SPF-04290
Argon Fan HAT v1.5 - module with fan for Raspberry Pi
Overlay with 40 x 40 mm fan for Raspberry Pi 4B / 3B+ / 3B. After downloading the script from the manufacturer's website, you can adjust the fan speed . There is a power /...
Index: ARG-15394
Index: ARG-15394
ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier STEMMA QT/Qwiic- Adafruit 1085
Module with analog to digital converter with 16-bit precision. Running at a speed of up to 860 samples per second. It has the ability to change the amplification of up to 16 x....
Index: ADA-08444
Index: ADA-08444
Case for Raspberry Pi 4B/3B+/3B/2B open transparent
Transparent case for Raspberry Pi minicomputer in versions 4B, 3B+, 3B, 2B and 1B+ works, in particular, with hats from the HiFiBerry Digi+, DAC+ Amp+. External dimensions:...
Index: RHF-05409
Index: RHF-05409
ReSpeaker v2.0 for Raspberry Pi - modul with 2 microphons - Seeedstudio 107100001
ReSpeaker is a Raspberry Pi expansion board with 2 microphones , designed for AI and voice applications. It allows you to build a powerful device that supports services such...
Index: SEE-11408
Index: SEE-11408
UPS HAT for Raspberry Pi Zero - Waveshare 19739
The UPS overlay provides uninterrupted power to the Raspberry Pi Zero minicomputer, thanks to the Li-Pol battery, when the power from the Raspberry Pi Zero power supply...
Index: WSR-19717
Index: WSR-19717
Logic level converter I2C PCA9306 - SparkFun BOB-15439
The module allows bidirectional communication between circuits using different voltage levels for I2C and SMBus. PCA9306 converts voltages from lower range from 1.2 V to 3.3 V...
Index: SPF-01709
Index: SPF-01709
Extension GPIO Raspberry 4B/3B+/3B/2B/B+ to the contact plate + tape + breadboard
This module allows to connect GPIO pins of Raspberry Pi 4B, 3B+, 3B, 2B and B+ versions to the PCB using 40 wires tape. The kit includes GPIO extension module, contact board...
Index: OST-14314
Index: OST-14314
Uninterruptible power supply UPS - Power adapter for Raspberry Pi - 5 V - Waveshare 18306
UPS power supply in the form of an overlay for Raspberry Pi , which brings extra power to the module in case of power failure or while traveling. It is powered by two 18650...
Index: WSR-19046
Index: WSR-19046
Grove - Base Hat for Raspberry Pi - shield for Raspberry Pi 4B/3B+/3B
Overlay for Raspberry Pi 4B / 3B+ / 3B based STM32 microcontroller with 12-bit ADC, with Grove connectors, allows the connection of sensors and modules from the Grove...
Index: SEE-15458
Index: SEE-15458
THT Prototype Board - Raspberry Pi
Board allows for independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer.
Index: MOD-01742
Index: MOD-01742
IQaudIO DAC+ - sound card for Raspberry Pi 4B/3B+/3B
The sound card designed for the Raspberry Pi minicomputer provides high quality Full HD 24-bit/192 kHz audio with built-in hardware volume control via the Linux built-in...
Index: RPI-18615
Index: RPI-18615
Power over Ethernet HAT (E) is a shield for Raspberry Pi in version 3B+ and 4B . It allows you to simultaneously obtain a network connection in the 802.3af standard and to...
Index: WSR-22399
Index: WSR-22399
RPi Relay Board (B) IC Test Board - Waveshare 15275
Shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of up to 16 servos. It communicates via I2C interface and is based on PCA9685 system.
Index: WSR-13309
Index: WSR-13309
MSX Proto Hat for Raspberry Pi 4B/3B+/3B/2B
Board allows for self-creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MSX-04552
Index: MSX-04552
Raspberry Pi DAC Pro - sound card for Raspberry Pi 4B/3B+/3B
The Raspberry Pi DAC Pro is based on the Burr-Brown PCM5242 32-bit/384 kHz DAC, capable of playing Full HD 24-bit/192 kHz audio. The module features two RCA connectors, a...
Index: RPI-18616
Index: RPI-18616
Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...
Index: PIM-10620
Index: PIM-10620
HiFiBerry DAC+ RCA Zero for 4B/3B+/3/2/B+/A+/Zero
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device, the converter of quality ESS DAC has a resolution of...
Index: RHF-07482
Index: RHF-07482
Li-Ion Battery HAT for Raspberry Pi - Waveshare 15141
Panel based on the system SW6106, enables powerring the Raspberry Pi using the rechargeable Li-Ion battery 14500, which makes the device portable. The device can also be used...
Index: WSR-13459
Index: WSR-13459