Filter by
Price
1 285
more (-5) ok clear
Manufacturers
more (530) ok clear
Filter

Promotion products

Recomendations

Gas sensors

Products: 78
Loading...

Smoke and flammable gas sensor MQ-2 - semiconductor - blue module

Module with smoke and flammable gas MQ-2 detector with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage of 5 V. It has digital and analog output, making it...
5.0 (1)
Index: MOD-03027
Index: MOD-03027
Shipping in 24 hours
Available
Regular price €2.90 Price €2.90

Carbon monoxide and flammable gases sensor MQ-9 - semiconductor - blue module

The sensor detects the concentration of CO (carbon monoxide) and flammable gases. It has the goldpin pins, pitch of 2,54 mm. It is powered with the voltage of 5 V. It has...
4.5 (2)
Index: MOD-03029
Index: MOD-03029
Shipping in 24 hours
Available
Regular price €3.50 Price €3.50

CO sensors tester - spray 400ml

The preparation is designed for testing the carbon monoxide and smoke detectors. It enables the testing of the correctness of operation of the CO detector. Capacity: 400 ml.
4.9 (9)
Index: CHE-08275
Index: CHE-08275
Shipping in 24 hours
Available
Regular price €6.90 Price €6.90

Gas connections tightness tester - 400ml spray

Odourless water-based agent to detect any gas or air leakage, even at low pressure. Package capacity is 400 ml.
4.5 (2)
Index: CHE-05708
Index: CHE-05708
Shipping in 24 hours
Available
Regular price €6.50 Price €6.50

WiFi gas sensor - Zamel CGZ-02

The CGZ-02 gas sensor from Zamel is an explosive gas sensor equipped with a WiFi module , such as: natural gas, propane-butane. The device continuously monitors the...
4.7 (3)
Index: ZML-21928
Index: ZML-21928
Shipping in 24 hours
Available
Regular price €26.90 Price €26.90

LPG, natural gas and carbon gas sensor MQ-5 module - semiconductor - Waveshare 9531

Module with sensor MQ-5 detecting LPG, natural gas and coal gas . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: WSR-05522
Index: WSR-05522
Shipping in 24 hours
Available
Regular price €5.00 Price €5.00

Enviro pHAT - temperature, humidity, pressure, light, gas, ADC sensor with microphone - HAT for Raspberry Pi

Overlay for Raspberry Pi equipped with BME280 temperature, pressure and humidity sensor, LTR-559 light and proximity sensor, MICS6814 analog gas sensor, ADC ADS1015...
5.0 (4)
Index: PIM-17074
Index: PIM-17074
Shipping in 24 hours
Available
Regular price €64.90 Price €64.90

Grove - VOC and CO2 gas sensor SGP30 - semiconductor MOS - Seeedstudio 101020512

The SGP30 sensor module is used to detect volatile organic compounds (VOC) and carbon dioxide (CO2). It communicates through the I2C interface. On the board there is a...
5.0 (1)
Index: SEE-15542
Index: SEE-15542
Shipping in 24 hours
Available
Regular price €19.90 Price €19.90

Fibaro Smoke Sensor - Z-Wave Plus - white - FGSD-002

The Fibaro Smoke Sensor is an element of an intelligent smart home system that ensures a high level of security in the home environment. Thanks to advanced technology , it...
Index: FIB-23763
Index: FIB-23763
Shipping in 24 hours
Available
Regular price €66.90 Price €66.90

Stand for MQ - gas sensor - Pololu 1479

Stand that allows mounting of sensors from MQ series.
5.0 (1)
Index: PLL-00238
Index: PLL-00238
Shipping in 24 hours
Available
Regular price €1.50 Price €1.50

Smoke and flammable MQ-2 gas sensor - semiconductor

Smoke and flammable gases detector with analogue output.
Index: PLL-00548
Index: PLL-00548
Shipping in 24 hours
Available
Regular price €1.90 Price €1.90

Gravity - ozone sensor I2C - electrochemical - DFRobot SEN0321

Electrochemical ozone sensor for accurate O3 concentration measurement in the environment. Its measuring range is from 0 ppm to 10 ppm. It communicates via the I2C...
5.0 (4)
Index: DFR-16575
Index: DFR-16575
Shipping in 24 hours
Available
Regular price €55.50 Price €55.50

Fermion - carbon monoxide CO sensor - MEMS - 5-5000ppm - DFRobot SEN0564

A sensor from DFRobot that detects the concentration of carbon monoxide CO in a room. The module uses MEMS technology, which not only allows for obtaining highly precise...
5.0 (1)
Index: DFR-23737
Index: DFR-23737
Shipping in 24 hours
Available
Regular price €5.90 Price €5.90

Fermion - smoke detector - MEMS - 10-1000ppm - DFRobot SEN0570

A sensor from DFRobot, designed for qualitative smoke detection. The detection range is from 10 ppm to 1000 ppm . Moreover, the sensor is characterized by low energy...
Index: DFR-23747
Index: DFR-23747
Shipping in 24 hours
Available
Regular price €5.90 Price €5.90

DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical

The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...
5.0 (3)
Index: DFR-04487
Index: DFR-04487
Shipping in 24 hours
Available
Regular price €59.90 Price €59.90

Explosive gas sensor TGS813-A00 - semiconductor

The sensor has high sensitivity to gases such as methane, propane, butane and hydrogen. The supply voltage is 24 V. Measuring range is up to 10,000 ppm.
5.0 (1)
Index: SES-10779
Index: SES-10779
Shipping in 24 hours
Available
Regular price €13.90 Price €13.90

Fermion - analog gas sensor NO, NO2, H2 - MEMS MiCS-2714 - DFRobot SEN0441

An analog sensor for NO, NO2 and H2 gases manufactured by DFRobot. The MiCS-2714 MEMS sensor module can measure hydrogen and nitrogen oxide concentrations. It detects...
5.0 (1)
Index: DFR-20679
Index: DFR-20679
Shipping in 24 hours
Available
Regular price €11.90 Price €11.90

TVOC gas sensor - MOX - AGS02MA I2C - Adafruit 5593

A module from Adafruit in the form of a TVOC gas sensor . It was equipped with the AGS02MA system and a small MOX sensor - a heated metal oxide changes resistance based on...
Index: ADA-22890
Index: ADA-22890
Shipping in 24 hours
Available
Regular price €7.50 Price €7.50

Fermion - EtOH ethanol sensor - MEMS - 1-500ppm - DFRobot SEN0569

A sensor manufactured by DFRobot designed to detect ethanol EtOH present in the air. The module uses MEMS technology, which not only allows for obtaining highly precise...
Index: DFR-23741
Index: DFR-23741
Shipping in 24 hours
Available
Regular price €5.90 Price €5.90

MQ-7 carbon monoxide sensor - semiconductor

Carbon monoxide sensor with analog output.
5.0 (1)
Index: DNG-00239
Index: DNG-00239
Shipping in 24 hours
Available
Regular price €1.90 Price €1.90

Gas detector Benetech GM8800A

Precise device detecting the flammable gases such as natural gas, propane, butane, methane, propanol, ethanol, ammonia, carbon monoxide, gasoline vapors, hydrogen sulfide. It...
4.9 (13)
Index: BNT-10771
Index: BNT-10771
Shipping in 24 hours
Available
Regular price €36.50 Price €29.93
  • Reduced price
  • Promotion

Temperature, humidity, pressure and gas sensor - BME688 - SPI/I2C - STEMMA QT/Qwiic - Adafruit 5046

Multifunctional sensor that combines sensors for temperature, humidity, pressure and VOC gas. It has an embedded Bosch BME688 chip. Manufactured by Adafruit, it uses SPI and...
5.0 (2)
Index: ADA-19788
Index: ADA-19788
Shipping in 24 hours
Available
Regular price €27.90 Price €27.90

Smoke and flammable gas sensor MQ-2 - semiconductor - black

Module with smoke detector and flammable gas MQ-2 with the goldpin pins, pitch of 2.54 mm. It  is powered with the voltage of 5 V. It has digital and analog output, making it...
5.0 (3)
Index: MOD-01911
Index: MOD-01911
Shipping in 24 hours
Available
Regular price €3.50 Price €3.50

MQ-135 alcohol, benzen, ammonia sensor module - semiconductor - Waveshare 9528

Module with sensor MQ-135 detecting benzene, alcohol and smoke. It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
5.0 (1)
Index: WSR-05520
Index: WSR-05520
Shipping in 24 hours
Available
Regular price €5.90 Price €5.90

MQ series gas sensors

For both hobbyists and more advanced designers, we recommend the MQ series of sensors in a round housing, with a standardized pin arrangement (6 pins). The MQ series gas sensors have small dimensions - the head height is approximately 13 mm and the diameter is approximately 20 mm. We have also prepared ready-made modules for you, in which the sensors are built on a printed circuit board measuring approximately 40 x 20 mm with pins in the form of a goldpin connector with a standard 2.54 mm pitch.

Gas sensors – additional information

The sensors require a power supply in the range of 2.5 V to 5 V. The sensors we offer include MQ-2 smoke, propane-butane (LPG) and hydrogen sensors, MQ-3 alcohol sensors, MQ-4 methane sensors, and propane-butane sensors. MQ-5, MQ-7 carbon monoxide sensors, MQ-8 hydrogen sensors, MQ-9 carbon monoxide sensor, MQ-135 alcohol, gasoline and ammonia sensors. Propane butane is a mixture of gases used to power cars with LPG installations. For this reason, it is worth installing this type of sensor, e.g. with an additional sound signal, in the garage. In addition, carbon monoxide and gas sensors should be installed in buildings with gas installations

In turn, a carbon monoxide detector should be installed, among others: houses heated with coal or wood. A carbon monoxide detector is the basic and most effective protection against carbon monoxide poisoning.

Thanks to analog and digital outputs, MQ sensors are perfect for cooperation with well-known development kits such as Arduino or Raspberry Pi . On our website you will also find DFRobot IO Expansion Shield modules.

TGS series gas sensors

A similar solution to the MQ series sensors are the TGS series sensors. They come in a small, standard TO-5 type housing with a diameter of approximately 9 mm and a head height of approximately 8 mm. TGS sensors are characterized by high sensitivity, low power consumption and long service life.

The sensors we offer include TGS813 explosive gas sensors. A gas explosion is extremely dangerous because it is accompanied by very high temperatures. Additionally, TGS2610 propane-butane sensors, TGS2611 methane sensors, TGS2600 air purity sensors, and TGS2603 unpleasant odor sensors are available.

Choose ready-made solutions - natural gas sensor and other models

How does a natural gas sensor work? When the device detects the presence of natural gas in the air that exceeds the limit value for a certain period of time, it activates an alarm. Natural gas

Botland offers you ready-made devices such as natural gas sensors, methane and propane-butane sensors, carbon monoxide (carbon monoxide sensors) and smoke detectors. Depending on your needs, you can purchase sensors powered by mains or batteries. Natural gas (liquefied natural gas (LNG)) is increasingly used to power motor vehicles. For this reason, it should be installed in all places (e.g. parking lots and garages) where vehicles of this type are temporarily or permanently kept (parked).

We recommend an air quality sensor with an LCD display, which, in addition to displaying the measured content of PM 2.5 and PM 10 particulate matter, changes the backlight color to inform us about the air quality. If you are interested in ready-to-use alcohol sensors, our offer includes disposable breathalyzers, semiconductor and electrochemical breathalyzers.

Gas sensors - FAQ

The concept of a gas sensor covers a wide range of sensors for various applications, and the type of substance detected depends on the design of the sensor and the chemical reagents used in it. Popular home gas detectors are typically designed to detect methane (the main component of natural gas), LPG, or carbon monoxide (carbon monoxide).

First, open the windows to ventilate a potential gas leak and notify tenants and neighbors of the danger. The next step is to evacuate people in the danger zone and call for help (number 112). If, after the arrival of specialists, it turns out that the alarm was false, it is worth contacting the sensor manufacturer or replacing the device with a new one.

Natural gas and carbon monoxide sensors should be mounted at a low height under the ceiling (approx. 15-30 cm from the ceiling for a natural gas sensor or 150-200 cm above the ground for a carbon monoxide sensor ). It is important that the sensor is placed no further than 6 m from a potential source of gas leakage (e.g. a stove or stove).

The basic rule when choosing a carbon monoxide and gas sensor is to pay attention to safety certificates - in order for the detector to perform its role correctly, you should choose only proven solutions from well-known manufacturers who take care of all necessary technical tests and approval of the product for marketing.

Propane-butane is a heavier gas than air, so it accumulates above the floor. For this reason, the LPG sensor should be mounted approximately 15-30 cm above the ground surface, and there should be no obstacles (objects, furniture, structural elements, etc.) between the sensor and the potential source of gas leakage.

The price of a gas sensor depends primarily on its functionality. The simplest detectors, with - in addition to the actual sensor - also a miniature alarm siren, usually cost around several dozen zlotys, while "intelligent" versions with WiFi connectivity cost around PLN 120-150.

Most gas detectors have a built-in button that allows you to check the operation of the acoustic and optical alarm. However, such a simple test does not verify the efficiency of the sensor itself - therefore, the test should be performed using a special tank with test gas , following the instructions of the tank manufacturer.

The natural gas sensor should be mounted on a wall or other vertical element of the building structure, at a height ranging from 15 to 30 cm from the ceiling. Importantly, the sensor should be as close as possible to the gas source (e.g. stove, stove or gas cylinder) and cannot be obscured by other objects. In most cases, the detector is mounted to the ground using screws and mounting pins.

When you hear the sensor signal, be sure to open the windows and notify your roommates and neighbors of the danger and start their evacuation. Then you need to call for help by calling 112. If the alarm turns out to be false, it is worth replacing the gas sensor with a new one.

Natural gas sensors (due to its low density) should be installed approximately 15-30 cm below the ceiling surface. Carbon monoxide detectors should be installed 150-200 cm above the floor (i.e. approximately at the height of a standing person's face).

If natural gas is used in the house (e.g. to power a stove, oven or central heating furnace), it is necessary to use a gas detector near the installation site of the device. You should choose only proven sensors with appropriate certificates, e.g. Lanberg SR-1007. It is also worth purchasing a branded carbon monoxide detector.

Gas sensors should be structurally resistant to moisture , but should be avoided in places where they may be exposed to large amounts of water vapor or oil vapors (e.g. directly above the stove).

Although carbon monoxide (carbon monoxide) is also a gaseous substance, the popular term "gas sensor" most often refers to devices that detect natural gas (mainly methane) or LPG - so it is worth purchasing an additional, separate carbon monoxide sensor .

The sensitivity range of a given device depends on the sensor used in it - in each case, check the technical documentation of the detector which substances it is sensitive to (there are devices that detect only one of these gases or both).

A natural gas sensor should be placed in every room where there is a real risk of gas leakage in the event of a failure - for this reason, it is recommended to install gas detectors primarily in kitchens equipped with gas stoves or ovens, as well as bathrooms or other rooms with stoves. or central heating boilers.

The natural gas sensor should be mounted approximately 15-30 cm below the ceiling, and in the case of LPG detectors - 15-30 cm above the floor surface. Carbon monoxide detectors should be installed at a height of approximately 150-200 cm above the floor.

Each electrochemical sensor has a certain sensitivity not only to the main gas it is designed to detect (e.g. methane or carbon monoxide), but also (though much weaker) reacts to other vapors. Therefore, it is worth checking the characteristics of a given device - manufacturers usually provide appropriate information in the technical data of the product.

Branded natural gas, carbon monoxide and LPG sensors can be found in the Botland store offer - in addition to simple sensors with a built-in acoustic alarm, we also have advanced detectors with radio communication , intended for smart home systems.

The gas temperature sensor is used in automotive installations to correct the injector control in terms of the instantaneous gas density. Typically, a classic thermoresistor is used in the construction of this type of sensors.

In an apartment equipped with a gas installation, at least one natural gas sensor should be installed (e.g. in the place of installation of the "receiving" device, e.g. a stove or a central heating furnace), but it is also worth remembering about a carbon monoxide sensor, because this deadly carbon monoxide is a product of incomplete combustion organic gases. Smoke detectors , capable of detecting fire early, are also often chosen.