Gravity platform was designed by DFRobot company and it’s a great solution for both beginners and professionals. Gravity modules can be used in robotics, building automation, or monitoring of environmental parameters. Gravity is a platform to which you can connect a lot of different sensors without soldering. Botland.store offers shields modules with sensors, and also Arduino compatible boards. If you’re in device prototyping, Gravity series will certainly meet all your expectations. In this category, you will find products such as gas sensors, pH meters, electricity meters, flow meters, and many more! Use your imagination to create any project you wish.
Gravity modules
DFRobot Gravity - analog soil moisture sensor - corrosion resistant - SEN0193
The device is used to measure soil moisture by the capacitive detection. It has a built-in voltage regulator which provides an operating voltage range from 3.3 V to 5 V. It is...Gravity: MOSFET Power Controller 5-36V/20A
A switch that allows you to control a device requiring a large current by using a microcontroller. The module works with voltage from 5 V to 36 V with the current consumption...Gravity - analog water pressure sensor - DFRobot SEN0257
Analog sensor designed to measure water pressure, manufactured by DFRobot. It uses a 3-pin Gravity interface. The supported input voltage (standard) is 5 V , and the...DFRobot Gravity: Non-contact Liquid Level Sensor
The sensor determines the liquid level without dipping into the liquid. Due to the lack of contact with the liquid, the module is suitable for level measurement of hazardous...Gravity - microwave sensor for motion detection V2.0 - DFRobot SEN0192
The sensor uses the Doppler effect to detect the movement of objects. By using microwaves instead of infrared, it is possible to detect objects reflecting waves in the...Gravity: Analog Liquid Level Sensor (FS-IR02)
Photoelectric liquid's level sensor. It has high sensitivity without the need to use the mechanical parts. The probe withstands high temperature and high pressure.DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Analog TDS sensor compatible with Arduino, it is used for measuring the hardness and the purity of water. It can be used to test the quality of water in households, hydroponic...DFRobot Gravity v2.1.0 - I2C Digital Wattmeter
A module that allows you to measure electric energy consumption of up to 26 V / 8 A. The maximum measurement error is approx. 0,2%. It communicates through an I2C interface. It...DFRobot Gravity - digital PIR motion sensor
Sensor, type PIR, can detect movement. Used to detect objects in the premises, alarm and lighting systems. The sensor is supplied with the voltage from 3.3 to 5 V. The Gravity...DFRobot Gravity - pH analog sensor/meter
Analog pH meter with an analgue output. Allows to measure water quality. It has an accuracy of +/- 0.1 pH, which is sufficient for most applications. Equipped with LED, BNC...DFRobot Gravity - vibration sensor
A simple vibration sensor with digital output. It is supplied with the voltage from 3.3 V to 5 V, it works with Arduino modules.DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A
The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...DFRobot Gravity - analog sensor of ambient light
Analog ambient light sensor PT550 compatible with Arduino and Raspberry Pi. The sensor allows to determine the light density and reflects the analog voltage signal back to...Gravity - I2C hub splitter - 8 ports - DFRobot DFR0759
I2C hub splitter allows to connect several modules and peripherals to one I2C connector. Thanks to DFR0759 hub you have possibility to connect up to 8 Gravity series...Gravity URM09 - ultrasonic distance sensor 2-500cm sensor analog - DFRobot SEN0307
Module with ultrasonic distance sensor URM09, with measuring range from 2 cm to 500 cm. Supply voltage is 3.3 V to 5.5 V. The measuring frequency can reach up to 30 Hz. It...DFRobot Gravity - analogue turbidity sensor
Sensor for testing the quality of water by measuring its turbidity. Operates at 5 volts at temperatures from -30°C to 80°C.DFRobot Gravity - sound sensor - analog
Sound sensor module with analog output. Works with a supply voltage from 3.3 V to 5 V. It enables the determination of the volume or identifying characteristic sounds from the...DFRobot Gravity - a speaker with a digital interface
The module is based on the single-wire 8002 amplifier with digital interface. It can work as a simple buzzer or play music. The volume is adjustable with built in...DFRobot Gravity - Propeller with DC 3-6V Motor Module
A small motor module with controller with speed control capability. The device is compatible with Arduino . A propeller and cable are also included.DFRobot Gravity - vibration sensor with piezoelectric membrane
Analog vibration sensor with piezoelectric membrane. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.DFRobot Gravity - digital sound generator - buzzer
Digital buzzer module for Arduino and Raspberry Pi, which can be controlled via low and high status. When changing the frequencies of the buzzer, you can hear a different...DFRobot Gravity - capacitive touch sensor
Capacitive touch sensor uses a digital interface to work. It can be powered with the voltage from 3.3 V to 5 V. It feels the human or metak touch, even through a fabric or paper.DFRobot Gravity - relay 1 channel - 10A/277VAC contacts - 5V coil
Module with relay that allows for the control of the actuators consuming the current of up to 12 A for the voltage of 125 V or 10 A for 277 V through the ports of the...Gravity - Analog Waterproof Capacitive Soil Moisture Sensor V2.0 - DFRobot SEN0308
The device is designed to measure soil moisture by means of capacitive detection. DFRobot product has increased water resistance . It can be placed in the soil for a long...See also
- Oxygen sensors
- Resistance sensors
- Door sensors
- Nfc readers
- Inductive sensors
- RPM sensors
- Led motion detectors
- Tilt sensors
- Accelerometers
- Twilight sensors
- Wifi temperature sensors
- Hall effect sensors
- QR readers
- Piezoelectric sensors
- Optical sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Sensors of light and color
- Gas sensors
- Limit switches
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
Check the large selection of products available at Botland.store. We offer reasonable prices, high-quality electronics, fast delivery, and professional guidance.
Easy-to-use modules with various possibilities
Gravity series from DFRobot is an open-source, high-quality solution that allows its users to create anything effortlessly. If you are looking for a plug and play electronics modules, Gravity will meet all your expectations. Connect and mix modules with Arduino and Raspberry Pi and enjoy realizing your ideas. With this series, you will be able to develop both advanced and simple projects. What is more, all Gravity modules come with clear documentation, which will help you to achieve your goal and understand what you’re doing. Gravity series is especially recommended for DIY enthusiasts and beginners who want to dive into the world of microelectronics and programming. Discover trouble-free learning!
DFRobot Gravity Series can be applied to create smart home solutions, robots, industrial manufacturing, and urban environmental monitoring. The Gravity series is essential for project prototypes, start-ups, and student productions. Botland.store offers a large variety of Gravity modules for both professionals and amateurs. Our catalog includes modules such as pH water quality sensors, infrared sensors, flame detectors, ultrasonic sensors, and other products for all kinds of basic applications. With Gravity series, you can monitor heart rate, UV, motion, or many more parameters, and thus you will be able to design and create wearable items. The Gravity Starter Kits available at Botland.store include the most popular and interesting components and sensors. These sensors are highly modularized and interact with microcontrollers with a 3-pin pinhead.
How you can apply Gravity modules?
Gravity modules offered by the Botland store allow you to develop prototypes of your ideas without being an electronics expert. Moreover, Gravity series is a perfect tool for educational purposes, thanks to color-coded pins and detailed documentation available.
Gravity can be compared to LEGO blocks - it's simple to use, small, light, and it can be used by beginners because it doesn't require too much tech expertise. With Gravity modules, you can build, for example, an advanced weather station to monitor environmental conditions (such as temperature, humidity, pH, dust, salinity, liquid level, sound pressure, gas concentration, pressure, light intensity, and with the Lightning Sensor - lightning detection at a distance of up to 40 km). It doesn’t matter if you are a beginner or professional, if you’re interested in embedded systems, we highly recommend you to try the DFR001 set, in which you will find 9 different sensor modules with connecting cables, thanks to which you will be able to quickly and easily expand the possibilities of your project. Check our large offer of Gravity sensors and modules. Botland.store guarantees the best prices and fast delivery. Don’t hesitate to contact us if you have any questions. Our customer service is always at your disposal, ready to answer your questions.