Luxonis Oak-1 - AI Image Recognition Kit - Auto-Focus - Outlet
Index: OUT-25667
- New
- On sale!
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
Gravity modules - Strona 2
Loading...
DFRobot Gravity - relay 1 channel - 10A/277VAC contacts - 5V coil
Module with relay that allows for the control of the actuators consuming the current of up to 12 A for the voltage of 125 V or 10 A for 277 V through the ports of the...
Index: DFR-05964
Index: DFR-05964
DFRobot Gravity: digital I2C multiplexer - 8-channel
Module with multiplexer that allows you to connect 8 different digital I2C buses to one interface, for each, there are separate pins SDA (bus of data line) and SCL (clock line...
Index: DFR-12628
Index: DFR-12628
A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04279
Index: DFR-04279
DFRobot Gravity - line tracking sensor - reflective, digital
Digital sensor of tracking the line, reflective for Arduino, it can detect the white and black lines. Separate signals provides a stable output signal TTL, so it looks for more...
Index: DFR-11273
Index: DFR-11273
DFRobot - Flexible Vibration Sensor with piezo foil
Analog-to-digital vibration sensor with elastic plastic piezoelectric sensor. It is powered with the voltage of 5 V, it works with Arduino modules.
Index: DFR-08366
Index: DFR-08366
DFRobot TCS34725 RGB Color Sensor For Arduino
A module that allows you to make the function to determine the color of ambient light. Applied sensor TCS34725 with a LED backlight and a built-in IR filter. It communicates...
Index: DFR-07591
Index: DFR-07591
DFRobot Gravity - Non-contact IR Thermometer Sensor MLX90614
Non-contact temperature sensor. It is used for measurement of IR radiation and does not require the direct touch. It communicates through an I2C interface.
Index: DFR-06933
Index: DFR-06933
DFRobot Gravity – Lightning Sensor
The module is equipped with the AMS AS3935 Franklin system and a special antenna Coilcraft MA5532-AE for determining the distance from atmospheric discharges, intensity and...
Index: DFR-13752
Index: DFR-13752
DFRobot Gravity - analog soil humidity sensor
The device is used to measure the soil moisture by measuring the resistance, compatible with Arduino and Raspberry Pi. The supply voltage is from 3.3 V to 5 V. The sensor is...
Index: DFR-11259
Index: DFR-11259
Gravity - Analog temperature and humidity sensor - SHT30 - DFRobot DFR0588
Analog temperature and humidity sensor produced by DFRobot. The module is equipped with a high quality new generation SHT30 chip from Sensirion. It uses CMOSens...
Index: DFR-19383
Index: DFR-19383
DFRobot Gravity - mini PIR motion detector
Digital PIR motion sensor for Arduino and Raspberry Pi. The module allows you to detect motion in the range of its operation, up to 7 meters. The sensor is powered with the...
Index: DFR-11275
Index: DFR-11275
Gravity: ADC converter ADS1115 16-bit - 4-channel
Module made by the Gravity features a 16-bit analog-to-digital converter ADS1115.
Index: DFR-12472
Index: DFR-12472
Disposable ECG Electrodes Pack (12 pcs)
Disposable EKG electrodes designed for heart examination and other biomedical measurements. The set consists of 12 self-adhesive sensors of breathable fabric and foam with...
Index: DFR-07922
Index: DFR-07922
Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250
A 6-axis inertial motion sensor featuring the Bosch BMI160 MEMS chip. The module integrates a 16-bit 3-axis accelerometer and a 3-axis gyroscope . It is used to measure...
Index: DFR-19380
Index: DFR-19380
Gravity - segment display 4-digital I2C - green - DFRobot DFR0645-G
Four-digit, 8-segment Gravity series display with adjustable 8-level brightness levels, The modules are equipped with an I2C port compatible with the Gravity...
Index: DFR-16309
Index: DFR-16309
DFRobot Gravity - analogue EMG sensor, electromyograph -OYMotio.n
The EMG sensor was created through the cooperation of DFRobot and OYMotion. EMG - electromyograph, sensor of electric activity of muscles and peripheral nerves of human. This...
Index: DFR-10833
Index: DFR-10833
Gravity - DHT22 digital temperature and humidity sensor - DFRobot SEN0137
DFrobot's DHT22 digital humidity and temperature sensor module provides precise measurements and has a short response time combined with high reliability and resistance to...
Index: DFR-15760
Index: DFR-15760
DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical
The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...
Index: DFR-04487
Index: DFR-04487
Gravity: Analog High Temperature Sensor
Analog sensor of the high temperature, operating in the range from 30 °C to 350 °C. It is powered with a voltage of 3.3 V to 5.5 V. The kit has a PT100 probe.
Index: DFR-06613
Index: DFR-06613
DFRobot Gravity - rotary potentiometer 300 degrees
Rotary potentiometer for Arduino and Raspberry Pi, the rotation angle is 300 degrees. The Gravity interface supports the Plug & Play function. Working voltage is from 3.3 V to...
Index: DFR-11257
Index: DFR-11257
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
- Reduced price
- Promotion
Gravity - segment display 4-digital I2C - red - DFRobot DFR0645-R
4-digit, 8-segment Gravity series display , allows you to adjust the brightness of the displayed characters, thanks to 8-stage adjustment, The device has an I2C port...
Index: DFR-16310
Index: DFR-16310
DFRobot Gravity - MP3 player - JQ8400-FL UART
Module that allows you to play music files directly from the 8 MB device memory . It supports MP3 and WAV formats. It communicates with the microcontroller via the UART...
Index: DFR-12358
Index: DFR-12358
DFRobot Gravity - digital button Tact Switch - yellow
Digital monostable switch with 3-pin connector . It is powered from 3.3V to 5V and works with Arduino modules.
Index: DFR-11279
Index: DFR-11279
See also
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
