List of products by brand SparkFun - Strona 18
FlexiForce Pressure Sensor - 25lbs - SparkFun SEN-08712
Pressure sensor reduces its resistance when the force put to its tip, increases. Sensor with a length of 216 mm, the maximum pressure is approx. 11 kg.- EOL
RTC RV-1805 I2C (QWIIC) - real time clock + supercapacitor - SparkFun BOB-14558
The module is based on a RV-1805 system with a real-time clock and a backup battery (battery - supecapacitor included). It allows you to read the time in hours, minutes, and...- EOL
MPU-9250 9DoF - 3-axis accelometer, gyroscope and I2C magnetometer - SparkFun SEN-13762
The sensor is a combination of 3-axis gyroscope, accelerometer and compass. It allows you to measure acceleration, magnetic field and angular velocity in the congigurable...- EOL
Solenoid, coil, 36V electromagnet - SparkFun ROB-10391
The device allows a linear motion, such as a push or pull, to be performed using a 12 - 36 volt voltage signal. The range of the pin is approximately 10 mm.- EOL
Qwiic Flex Glove Controller - SparkFun SEN-14666
Bending sensor based on a system ADS1015 ADC intended to use in e-clothing, e.g in gloves for lighting control. It communicates with the microcontroller through the I2C...- EOL
Papa Soundie Audio Player - OGG/WAV audio player - SparkFun DEV-14554
Audio player module equipped with a system VS1000D. It allows to playback OGG Vorbis and WAV files. It has a card slot for memory to store audio, and a built-in...- EOL
Graphic LCD Serial Backpack - driver for graphic displays - SparkFun LCD-09352
Controller for LCD graphic displays. The module uses a serial interface to communicate with the microcontroller. The controller allows to display text, lines, circles and...- EOL
Converter USB-UART FTDI FT232 3.3V on USB cable - SparkFun CAB-12977
The adapter allows you to connect a USB port to many different modules, with built-in converter USB to UART FT232. Included wire female connectors.- EOL
AST-CAN485 WiFi Shield - SparkFun WRL-14597
Shield for Arduino from SparkFun, that allows you to connect the system to a Wi-Fi network. Shield is based on the ESP8266 that allows CAN485 module to communicate via Wi-Fi....- EOL
WiFi IR Blaster - WiFi driver ESP8266 + IR receiver / transmitter - SparkFun WRL-15031
Module with ESP8266 system and IR transmitter and receiver enables control of IR devices via wi-fi. Wi-fi module can be programmed to provide an interface between HTTP, MQTT,...- EOL
Roshamglo Badge ATtiny84 - set for a game of rock, scissors, paper! - SparkFun KIT-14130
Roshamglo is a new way of playing rock-scissors-paper with your friends! Board uses the ATtiny 84 microcontroller and IR LEDs with receivers for communication between...- EOL
Tinker KIT - with RedBoard Atmega328 module - SparkFun KIT-14556
A set of electronic components that will help you get started with modules from the Arduino. The kit includes, i.a. LEDs, resistors, sensors, buttons, and servo, and core...- EOL
AST-CAN485 - AT90CAN128 with CAN controller compatible with Arduino Pro Mini - SparkFun DEV-14483
The SparkFun module is compatible with Arduino Pro Mini. It has 16 digital i/O and 8 analog I/O, analog-to-digital and digital-to-analog converter, hardware CAN485 controller...- EOL
GPS Logger Shield - GPS GP3906-TLP with SDcard reader - Shield for Arduino - SparkFun GPS-13750
Shield for Arduino with a GPS 10 Hz module and a slot for micro SD card. It can be used as a data logger that has an internal antenna and place for the 12 mm round battery. It...- EOL
Weather:bit weather station - extension for BBC micro:bit - SparkFun DEV-14214
Expansion board for Micro:bit module, having the capabilities of the weather station. It has built-in sensors of pressure, humidity, temperature and light, as well as...- EOL
RedBoard Edge ATmega328 compatible with Arduino - SparkFun DEV-14525
A module made by SparkFun, is fully compatible with the RedBoard, designed for panel mounting in an unusual case. It has 14 digital input/outputs, 6 PWM channels, 6 analog...- EOL
Inventor's Kit for MicroView - SparkFun KIT-13205
MicroView is a small OLED display compatible with Arduino. The kit includes i.a.: LEDs, resistors, sensors and servo, and MicroView display board.- EOL
ESP32 Thing - Environment Sensor Shield for ESP32 Thing - SparkFun DEV-14153
Shield for ESP32 that measure: temperature, humidity, atmospheric pressure, air quality and illuminance. It also has connectors for additional sensors, e.g. of direction and...- EOL
ProtoShield Kit - shield for Arduino - SparkFun DEV-13820
Shield for Arduino Uno Rev3 and derivatives allow you to create your own shields. It has led out all the connectors and two LEDs, resistors and a button at the user's...- EOL
RedBoard Turbo is compatible with Arduino - SparkFun DEV-14812
A module made by SparkFun, is fully compatible with the Arduino Uno. It has 14 digital input/outputs, 6 PWM channels, 6 analog inputs, as well as popular communication...- EOL
2.4GHz antenna with U.FL connector - self-adhesive - SparkFun WRL-11320
Antenna operating in the range of 2.4 GHz with U. FL connector. Working with modules of wi-fi, Bluetooth and XBee.- EOL
Button Pad 4x4 - Breakout PCB - SparkFun COM-08033
PCB to connect buttons on the matrix of 4x4. It also has a place to install the 1N4148 LEDs to isolate the switches and to facilitate the decoding.- EOL
- EOL
Inventor's Kit - v4.0 + guide - SparkFun KIT-14265
A set of electronic components that will help you get started with modules from the Arduino along with instructions in the form of attached book (eng). The kit includes LEDs,...- EOL