Set - Creality Hi 3D Printer + 4x Creality Hyper PLA Filament
Index: CRL-27627
- New
- Reduced price
- Pack
- Sale
Filament set - Rosa3D Refill PLA-CF Matt Home Decor 1,75mm 4x 1kg
Index: ROS-27713
- New
- Reduced price
- Pack
- Sale
- New
- Reduced price
- Pack
- Sale
M5Stamp Pico Mate - development module with ESP32-PICO-D4 - M5Stack
Index: MSS-20157
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 115
Loading...
VGA (slot) - DVI - I (plug) adapter allows you to connect devices with VGA output with DVI-I monitors using standard VGA cable.
Index: KAB-04131
Index: KAB-04131
MPL115A2 - digital barometer, pressure / altitude sensor 115kPa I2C 3-5V - Adafruit 992
Module with digital barometer that provides pressure measurement in the range of 500 to 1150 hPa with the accuracy of up to 1.5 hPa, and altitude of up to 10 km with an...
Index: ADA-04139
Index: ADA-04139
Buzzer with generator 32mm 12V in a case
Module with buzzer with a generator in a case with put out wires and mounting handles.
Index: EAK-04189
Index: EAK-04189
DFRobot KIT0011 - set of 27 modules with cables for Arduino
A set of 27 popular modules compatible with Arduino boards. In the set are i.a.: distance, light, touch, rotation, vibration, gas sensor, and a module with LED, relay and more....
Index: DFR-04297
Index: DFR-04297
Choke 10uH/1200mA - vertical mounting - 5pcs.
Inductance: 10 μH. Maximum current: 1200 mA. Dimensions: 6 x 8 mm. Price for 5 pieces.
Index: PAS-04358
Index: PAS-04358
Choke 470uH/300mA - vertical mounting - 5szt.
Inductance: 470 μH. Maximum current: 300 mA. Dimensions: 6 x 8 mm. Price for 5 pieces.
Index: PAS-04361
Index: PAS-04361
FT232RL SP-880 - USB converter - RS232 COM +/-6V with DB9 connector - Adafruit 18
Adapter on 140 cm cable allows you to connect devices with RS232 connector to the computer through the USB connector. The module appears to the operating system as a virtual...
Index: ADA-04371
Index: ADA-04371
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
IR transmitter from Grove, emitting light with a wavelength of 940 nm. It works with a supply voltage from 3.3 V to 5.0 V. Sensor provides a signal to a distance of 10...
Index: SEE-04418
Index: SEE-04418
THT RWA Resistor 10W 0,33 Ohm - 10pcs
A precise resistor with high stability of the RWA type with a capacity of 10 W and a resistance of 0.33 Ω. The price includes 10 pieces.
Index: PAS-04567
Index: PAS-04567
Molex power cable to 2x Molex - 15cm
The adapter allows you to split the MOLEX connector into two separate MOLEX connectors.
Index: KAB-04637
Index: KAB-04637
DVI-D - DVI-D cable - Akyga - 1.8 m long
DVI-D - DVI-D cable allows you to connect devices with DVI-D outputs in full HD. The cable length is 1.8 meters.
Index: KAB-04641
Index: KAB-04641
DFRobot Gravity - vibration sensor
A simple vibration sensor with digital output. It is supplied with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04711
Index: DFR-04711
Self-adhesive cable organizer - 10pcs.
Self-adhesive cable organiser. The size of the adhesive part is 25 x 18 mm and the length of the fastener is 95 mm. The organiser is available in two colors to be sent at random.
Index: KAB-04819
Index: KAB-04819
SPW2430 - module with MEMS microphone - Adafruit 2716
Module with silicon microphone, MEMS type, which does not require amplifier. It detects sound with frequency from 100 Hz to 10 kHz and converts it into an analog output signal...
Index: ADA-04968
Index: ADA-04968
Step-Down Voltage Regulator D24V22F7 - 7,5V 2,4A - Pololu 2860
Step-down converter with 7.5 V output voltage. The maximum current is 2.4 A. The supply voltage is in the wide range from 8 V to 36 V. The module dimensions are 18 x 18 mm.
Index: PLL-04980
Index: PLL-04980
USB Serial Light Adapter - USB-UART converter with miniUSB connector
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: DFR-05064
Index: DFR-05064
SATA power cable - SATA - 50cm
Male-male SATA connectors cable allowing you to connect a hard disk or CD-ROM to the motherboard of the computer. Cable length is 50 cm. Suitable for connector of Banana Pi.
Index: KAB-05228
Index: KAB-05228
Fuse holder 6x30mm GBZ30 - 5pcs.
The socket is designed for mounting a 6 x 30 mm fuse.
Index: KAB-05474
Index: KAB-05474
DFRobot Gravity - a speaker with a digital interface
The module is based on the single-wire 8002 amplifier with digital interface. It can work as a simple buzzer or play music. The volume is adjustable with built in...
Index: DFR-05501
Index: DFR-05501
MQ-7 carbon monoxide sensor module - semiconductor - Waveshare 9532
Module with MQ-2 carbon monoxide sensor with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it...
Index: WSR-05518
Index: WSR-05518
2.5/8mm insulated end ferrule - 10pcs
Sleeve end for multiwire copper cables. Maximum vein's cross-section is 2.5 mm2, sleeve length is 8 mm. Price is for 10 pieces.
Index: KAB-05834
Index: KAB-05834
Index: KAB-05872
Plastic case Kradex Z34 - 129x68x24mm black
Two-piece universal housing for electronic circuitry made of ABS in black. The enclosure is assembled using the mounting screws included with the enclosure feet. The...
Index: KDX-05891
Index: KDX-05891
- Sale