ELECTRONICS - Strona 43
Soil moisture sensor with 12V relay - HC-13
The sensor to determine the moisture level of the soil. When it exceeds the level set by the potentiometer, the LED lights up and switched are the contacts oc the relay. The...Rectifier diode P1000 10A10 10A/1000V - 10pcs.
Rectifier diode, maximum operating voltage 1000 V, current up to 10 A. Price for 10 pieces.Adapter SOP to DIP 8-pin - 10pcs
Adapter for connecting circuits in SMD SOP8 cases to DIP 8 pin outputs. It also allows you to connect circuits in a breadboard or connect with wires. Items are sold in sets of...Cable IDC 40 pin female-female 15 cm Raspberry Pi 4B/3B+/3B/2B
Female cable 15 cm long terminated with 40-pin IDC raster 2.54 mm (goldpin standard) connectors , matching Raspberry Pi 4B / 3B+ / 3B / 2B.Arduino Ethernet Shield 2 with microSD reader- A000024
Shield for Arduino allows users to easily connect to the Ethernet network. Module based on W5500, it also has a microSD card slot.DC 5,5/2,1mm socket with 50cm cable
DC power supply socket φ5.5 x 2.1 mm with a wire approx. 50 cm long.Potentiometer knob GC16 red - 6/16 mm - 5pcs
Knob for rotation potentiometer on axis of 6 mm. The height is 14.6 mm and the outer diameter is 16 mm.TEA5767 I2C FM stereo radio tuner module
A module that allows you to build a fully functional radio. It is controlled by the I2C bus. It is powered with the voltage from 2.5 V to 5.5 V.Connector 2,54 mm - socket housing 8-pin - 5pcs.
The 8-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 8-pin cases.2,54 mm - angular plug 3-pin - 5pcs.
The 3-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 3-pin plugs.2,54 mm - angular plug 2-pin - 5pcs.
Angled 2-pin plug for printing, 2.54 mm pitch. Set includes 5 2-pin plugs.Assembly bar male 10-pin, raster 5,08mm, angular closed
Disconnectable terminal block, male, angled, 10-pin. Raster 5,08 mm. Height 12 mm.- Sale
- SPECIAL OFFERS
IRF520 MOSFET Driver Module - Iduino ST1168
The executive module with the MOSFET transistor with the N channel to control the devices with higher current consumption than allowed by the control system, for example, a...RFiD keychain - 125kHz - 10szt.
The RFID identifier in the form of a keychain. Each chip has a unique code. The device works at a distance of 2 - 5 cm from the reader , the carrier frequency is 125 kHz....AC IEC double male / female socket with latch
Dual IEC male / female slot mounted in the case on the latch.Arcade Concave Button 3.5cm - blue - SparkFun COM-09337
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.- Sale
- SPECIAL OFFERS
DFRobot Gravity - analog soil moisture sensor - corrosion resistant - SEN0193
The device is used to measure soil moisture by the capacitive detection. It has a built-in voltage regulator which provides an operating voltage range from 3.3 V to 5 V. It is...WiFi module ESP-01M ESP8285 - 11GPIO, ADC, PCB Antenna
Wi-fi module based on the chip ESP8285. It works in the wi-fi 802.11 b/g/n standard. It is equipped with 18 pins - pitch of 1,6 mm, 11 of which are GPIO, 1 ADC and UART. It has...- Reduced price
- SPECIAL OFFERS
Wireless keyboard + mouse Smart H20 - black
Compact, wireless keyboard with touchpad and backlight for remote computer control. The device works with the Raspberry Pi. The set also includes the USB adaptor and charging...Velleman K / MOWM - a set of PVC wire / wire - 10 colors - 60m
Set of PVC wire cables in 10 colors. They are used, for example, for alarm installation. Total cable length is 60 m, AWG 24.SATA Data III wire (6GB / s) M / M 50cm - red
Cable SATA III complete with connectors at both ends, allows to achieve data transfer at 6 Gbps. It allows you to connect a CD drive or hard disk to the motherboard of the...Printer nozzle 0,5mm MK8 - filament 1,75mm - copper
Nozzle with a hole of 0.5 mm is suitable for most available printheads in printers, 3D. Supports filaments with a diameter of 1.75 mm. It has M6 threads.
