- New
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Motor drivers and servos - Strona 2
Loading...
RPi Relay Board (B) IC Test Board - Waveshare 15275
Shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of up to 16 servos. It communicates via I2C interface and is based on PCA9685 system.
Index: WSR-13309
Index: WSR-13309
Simply Robotics Motor Driver Board - motor driver - for Raspberry Pi Pico - Kitronik 5348
It imposes on the Raspberry Pi Pico extending the functionality of the module with the ability to control servos and motors. It allows you to simultaneously control 8 servos...
Index: KTR-22858
Index: KTR-22858
DRV8876 QFN - Single channel 37V/1.1A motor driver - Pololu 4037
DC motor driver manufactured by Pololu. Single-channel , equipped with the DRV8876 QFN system, it is supplied with the voltage from 4.5 V to 37 V. The continuous current...
Index: PLL-21361
Index: PLL-21361
DRV8874 - single channel 37V/2.1A motor driver - Pololu 4035
Single-channel DC motor driver from Pololu equipped with the DRV8874 system. It is supplied with the voltage from 4.5 V to 37 V. The continuous current per channel is 2.1...
Index: PLL-21359
Index: PLL-21359
MP6550 - single-channel motor controller 22V/1,7A - Pololu 4733
Driver based on the MP6550 chip that allows you to control the speed and direction of one DC motor. It works with motors powered by a voltage of 1.8 V to 22 V , with a...
Index: PLL-22594
Index: PLL-22594
DRV8825 - stepper motor driver 45V / 2,2A - Pololu 2133
Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling up to 2.2 A) per coil, when...
Index: PLL-01324
Index: PLL-01324
DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.
Index: PLL-02695
Index: PLL-02695
TB67S249FTG Stepper Motor Driver Carrier 47V/4,5A - Pololu 2973
Stepper motor driver based on TB67S249FTG chip. Powered by a voltage range of 10 - 47 V , with a maximum current consumption of 4.5 A per coil. Maximum resolution: 1 / 32...
Index: PLL-12228
Index: PLL-12228
The General Driver board is a multifunctional driver based on the ESP32-WROOM-32 module, which offers a wide range of possibilities and allows you to expand the project with...
Index: WSR-22832
Index: WSR-22832
Simply Servos Board - servo controller - 8 channels - for Raspberry Pi Pico - Kitronik 5339
Simply Servos Board is an overlay for the Raspberry Pi Pico, which allows you to control 8 servos at the same time. It is powered with the voltage ranging from 3 V to 12 V....
Index: KTR-21403
Index: KTR-21403
SparkFun Brushless Motor Driver - BLDC motor driver - TMC6300 - SparkFun ROB-21867
BLDC brushless motor driver from SparkFun equipped with the TMC6300 chip from ADI + Trinamic. SparkFun Brushless Motor Driver is an easy to use and extremely effective driver...
Index: SPF-23025
Index: SPF-23025
Servo 2040 - 18 Channel Servo Controller - Pimoroni PIM613
Servo 2040 is a servo driver manufactured by PiMoroni. It has 18-channels that allow you to control up to 18 servos simultaneously . What's more, it also supports...
Index: PIM-21462
Index: PIM-21462
MAX14870 - single-channel motor controller 36V/1.7A - Pololu 2961
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 2.5 A). Supply voltage from 4.5 V to 36 V.
Index: PLL-04200
Index: PLL-04200
TB67H420FTG Dual/Single Motor Driver Carrier- Pololu 2999
Dual channel DC motor controller . Continuous current per channel 1,7 A (momentary up to 4,5 A). Supply voltage from 10 V to 47 V .
Index: PLL-12057
Index: PLL-12057
Cytron SHIELD-2AMOTOR - 2-channel motor driver 26V/2A - shield for Arduino
Shield for Arduino with dual-channel DC motor driver operating with a voltage of 5 V to 26 V and current up to 2 A, based on the L298P circuit. The board has jumpers for...
Index: CTN-12404
Index: CTN-12404
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
- Reduced price
- Promotion
TB6612 - two-channel 13.5V / 1.2A motor driver with connectors - Adafruit 2448
Dual-channel driver motors on the basis of the layout of the TB6612FNG . The voltage of the motors is d 4.5 V to 13.5 V and logic voltage ranges from 2.7 V to 5 V . The...
Index: ADA-15916
Index: ADA-15916
Motor Driver HAT TB6612FNG - dual channel 12V/3A for Raspberry Pi - SB Components SKU21789
Overlay for Raspberry Pi equipped with 40-pin GPIO connector, including model 4B / 3B+ / 3B. HAT features a TB6612FNG dual channel DC motor driver, operating from 6 V to...
Index: SBC-20401
Index: SBC-20401
- On sale!
- Promotion
MOSFET driver with N channel - for motors, solenoids, LEDs - STEMMA JST PH 2mm - Adafruit 5648
N-channel MOSFET (also called transistor) driver from Adafruit, featuring the AO3406 chip. The module can be supplied with a voltage from 3 V to 30 V and controlled by a...
Index: ADA-22539
Index: ADA-22539
MP6500 - stepper motor driver 35V / 2.5A - with analog current control - Pololu 2966
Stepper motor driver based on MP6500 chip . Powered by a voltage range of 4.5 - 35 V, with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/8 step. The...
Index: PLL-10881
Index: PLL-10881
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
DRV8871 Brushed DC Motor Driver Breakout 45V/3,6A - Adafruit 3190
Single-channel DC motor controller . Continuous current per channel 2 A (momentary to 3.6 A). Supply voltage from 6.5 V to 45 V.
Index: ADA-07043
Index: ADA-07043
STSPIN220 Low-Voltage Stepper Motor Driver Carrier - Pololu 2876
Stepper motor driver powered from 1,8 V to 10 V. Maximum resolution: 1/256 koku. Can operate without heat sink or forced air flow at 1.1 A per phase.
Index: PLL-13822
Index: PLL-13822
Cytron MDDRC10 - two-channel driver for DC 10A 7V-30V motors
Two channel DC motor driver with supply voltage from 7 V to 30 V . Continuous current consumption per channel is 10 A , and momentary 30 A . When the controller is switched...
Index: CTN-18994
Index: CTN-18994
- Reduced price
- Promotion
See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras and recorders
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Tablets and smartphones
- Consoles
