- New
Filament Print-Me Swift PETG 1,75mm 1kg - Raspberry Pink
Index: PRI-25015
- New
- Reduced price
- Promotion
Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, cold white - 5m
Index: LED-07079
- Reduced price
- Promotion
- Reduced price
- Promotion
SENSORS - Strona 32
Loading...
Grove - infrared thermometer OTP-538U IR
Module from the Grove series, based on a sensor OTP-538U which, to measure the temperature, is using the analysis of infrared radiation in the range from -10 °C to 100 °C. It...
Index: SEE-11324
Index: SEE-11324
- Reduced price
- Promotion
DFRobot Gravity - MLX90614-DCI IR thermometer - non-contact
Non-contact temperature IR sensor MLX90614-DCI. It is used for measurement of IR radiation and does not require direct touch. It communicates through an I2C interface.
Index: DFR-12351
Index: DFR-12351
PiMoroni MCP9600 - Thermocouple Amplifier I2C
Module with thermocouple amplifier MCP9600 communicating through the SPI interface. It works with thermocouples of type K, J, T, N, S, E, B and R. It works with a supply...
Index: PIM-13858
Index: PIM-13858
VL53L3CX time-of-flight - distance and ambient light sensor I2C - 500cm - Pololu 3416
Digital sensor for time-of-flight distance and ambient light measurement. The measurement range is from 1 cm to 500 cm with a resolution of 1 mm . It uses I2C (TWi)...
Index: PLL-19102
Index: PLL-19102
Smoke sensor WSS1 WiFi Tuta Smart Life
A smoke detector that communicates via WiFi and the Tuya or Smart Life app. The device is used to detect smoke in rooms and signal its detection with notifications to the...
Index: REM-20563
Index: REM-20563
TOF laser distance sensor - 5m - UART/CAN - Waveshare 18301
Laser sensor using ToF (Time of Flight) technology for measurement. Its measuring range is from 0.01 m to 5 m with an accuracy of 1.5 cm . The measurement resolution is 1...
Index: WSR-22019
Index: WSR-22019
VL6180 - distance and light sensor with gesture recognition - I2C - SparkFun SEN-12784
Digital rangefinder VL6180 operating in the range of up to 10 cm. It communicates via the I2C bus, it operates with a voltage of 2.8 V. In this sensor, the distance is defined...
Index: SPF-03319
Index: SPF-03319
- On sale!
- Promotion
DFRobot Capacitive Touch Kit - a touch kit for Arduino
A kit for self-assembly of the capacitive touch for Arduino. The set consists of three styles of touch sensors: round in the style of iPod; touch keyboard that supports...
Index: DFR-10172
Index: DFR-10172
SGP40 gas sensor is used as an instrument to monitor indoor air quality . It allows to monitor the concentration of volatile organic compounds (VOC ) present in the air. The...
Index: ADA-18998
Index: ADA-18998
VL53L4CD Time-of-Flight - Distance sensor - 1-1300mm - I2C - STEMMA QT/Qwiic - Adafruit 5396
Efficient, digital distance sensor made in the Time of Flight technology. Equipped with the VL53L4CD system, it measures distances in the range from 1 mm to 1300 mm with...
Index: ADA-21060
Index: ADA-21060
Grove - temperature and humidity sensor - SHT41 - Seeedstudio 101021033
The Grove SHT41 is a next-generation digital sensor based on Sensirion's industry-proven humidity and temperature sensors. The temperature measurement range is from -40°C to...
Index: SEE-22415
Index: SEE-22415
Weather station - temperature and humidity meter + external probe Uni-T A12T
Wireless weather station in white, model A12T of Uni-T measures the temperature and humidity in real time and displays the information on a large LCD screen. The device...
Index: LEC-19074
Index: LEC-19074
Gravity - connection cable set - male plug PH2.0 - 30cm - 10pcs. - DFRobot FIT0897
A set of connecting cables equipped with a connector compliant with the Gravity standard and a 3-pin PH2.0 male goldpin connector. The cables were manufactured by DFRobot, they...
Index: DFR-21233
Index: DFR-21233
SenseCAP S2120 8in1- weather station LoRaWAN - Seeedstudio 101990961
SenseCAP S2120 from Seeedstudio is a weather station that collects and transmits data on air temperature, humidity, wind speed and direction, precipitation, light, UV index and...
Index: SEE-22419
Index: SEE-22419
Gravity - rainfall sensor - I2C and UART - DFRobot SEN0575
The Gravity rainfall sensor from DFRobot is a reliable and convenient device for precise measurements. Its design is based on a container with inclined walls that allow...
Index: DFR-23474
Index: DFR-23474
Fermion - carbon monoxide CO sensor - MEMS - 5-5000ppm - DFRobot SEN0564
A sensor from DFRobot that detects the concentration of carbon monoxide CO in a room. The module uses MEMS technology, which not only allows for obtaining highly precise...
Index: DFR-23737
Index: DFR-23737
Gravity - MAX30102 Heart Rate and Oximeter Sensor - DFRobot SEN0518
The heart rate sensor module and pulse oximeter is based on the MAX30102 chip. It is powered by 3.3 V / 5 V . The MAX30102 uses PPG (PhotoPlethysmoGraphy) data for...
Index: DFR-20974
Index: DFR-20974
SparkFun Qwiic Thermocouple Amplifier - MCP9600 - with screw connector - SparkFun SEN-16295
High accuracy thermocouple amplifier module that enables the built-in MCP9600 chip. It uses the I2C communication interface via the Qwiic connector. It enables temperature...
Index: SPF-21155
Index: SPF-21155
Gravity - UV ultraviolet light sensor - LTR390-UV-01 - I2C/UART - DFRobot SEN0540
Ultraviolet UV light sensor manufactured by DFRobot. It is equipped with the LTR390-UV-01 system that allows the measurement of radiation with a wavelength in the range from...
Index: DFR-22672
Index: DFR-22672
Gravity - gesture and touch sensor - UART- DFRobot SEN0285
A sensor module that combines gesture and touch recognition functions. It allows the detection of gestures from a distance of 0 to 30 cm, this distance can be adjusted in the...
Index: DFR-16308
Index: DFR-16308
Grove - multichannel gas sensor - Seeedstudio 101020820
Plate with four independent gas sensors: GM-102B, GM-302B, GM-502B, GM-702B , which can detect various gases such as carbon monoxide, nitrogen dioxide, ethyl alcohol, organic...
Index: SEE-16907
Index: SEE-16907
Gravity - PM1 / PM2.5 / PM10 Air Quality Sensor - DFRobot SEN0460
The sensor module allows to monitor the purity of the air, measures PM1 / PM2.5 / PM10 . It is equipped with a sensor allowing to detect particles with a diameter above 0.3 μm...
Index: DFR-20678
Index: DFR-20678
3D printer Creality Sermoon V1 Pro Z-axis limit switch kit
Z axis limit switch used in Sermoon V1 and Sermoon V1 Pro 3D printers. The sensor is mounted on a PCB , on which there is also a soldered connector and two mounting holes...
Index: CRL-21518
Index: CRL-21518
- Reduced price
- Promotion
BBMagic Meteo - Wireless temperature and humidity sensor
BBMagic Meteo wireless measuring module equipped with SHT20 sensor responsible for temperature and humidity measurement, the module communicates via Bluetooth Low Energy...
Index: BBM-15521
Index: BBM-15521
- On sale!
- Promotion