- Reduced price
- Promotion
Heatsink with thermoconductive tape for NanoPi M1/M2/2Fire - 14x14mm
Index: NNP-07042
- On sale!
- Promotion
- Reduced price
- Promotion
Gravity modules - Strona 4
Loading...
Gravity - AHT20 temperature and humidity sensor - DFRobot SEN0528
The Gravity series module is equipped with the AHT20 system enabling precise measurement of air temperature and humidity. It has a modern, semiconductor, capacitive humidity...
Index: DFR-21921
Index: DFR-21921
DFRobot Gravity - digital button Tact Switch - white
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-11278
Index: DFR-11278
DFRobot Gravity - digital IR transmitter
Digital IR transmitter from the Gravity, operating at a frequency of 38 kHz with a voltage of 5 V. The module communicates with an IR transmitter, after pairing the modules.
Index: DFR-11268
Index: DFR-11268
DFRobot Gravity - 5.4kΞ© slide potentiometer
Slide linear potentiometer with the resistance of 5.4 kΞ©. It is equipped with two 3-pin connectors that enable the direct connection of the module to the development board IO...
Index: DFR-11258
Index: DFR-11258
DFRobot Gravity - Hall magnetic field sensor
The magnetic field sensor with digital output OH9249. It is supplied with the voltage of from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04714
Index: DFR-04714
Gravity - segment display 8-digital I2C - green - DFRobot DFR0645-R
The DFRobot Gravity 8-digit, 8-segment display allows you to control the brightness level of the characters displayed, thanks to a 16-degree adjustment. The device...
Index: DFR-16312
Index: DFR-16312
DFRobot Gravity - wired pump - peristaltic
Module connecting the PPM motor driver with a peristaltic pump. The control signal is compatible with a signal controlling the servos that can be used with different boards,...
Index: DFR-11460
Index: DFR-11460
DFRobot Gravity - digital crash sensor (right)
The module is equipped with limit switch with lever with roller, it is designed for Arduino. It is powered with the voltage of 5 V.
Index: DFR-11266
Index: DFR-11266
DFRobot Gravity - an ultraviolet UV analog sensor
The UV light sensor is powered with the voltage of 5 V. The output is an analog voltage, proportional to the intensity of UV light intensity. The sensor can be used to detect...
Index: DFR-05517
Index: DFR-05517
DFRobot Gravity - module with Power LED
Module with a very bright LED diode. Voltage supply 5 V. When operating consumes approx. 20 mA. It w orks with Arduino modules.
Index: DFR-07442
Index: DFR-07442
DFRobot Gravity: Digital RGB LED Module
Gravity: Digital module LED RGB is a cascading interface, compatible with LED tape. Due to its construction it provides an easier way to connect the individual modules to...
Index: DFR-14425
Index: DFR-14425
Gravity - LIS2DW12 - 3-axis accelerometer Β±2g/Β±4g/Β±8g/Β±16g - I2C - DFRobot SEN0409
Gravity module in a form of 3-axis accelerometer , which allows to measure linear acceleration. It has a built-in LIS2DW12 chip (belonging to the popular LIS series) and...
Index: DFR-19915
Index: DFR-19915
DFRobot Gravity - digital magnetic field sensor
Digital magnetic sensor can detect the magnetic object near it. The supply voltage is from 3.3 V to 5 V.
Index: DFR-11274
Index: DFR-11274
DFRobot Gravity: Digital shake sensor
The shock sensor reacts to movement in a certain direction, so it can detect, for example, a hand movement. It is equipped with a vibration switch, spring type which serves to...
Index: DFR-13294
Index: DFR-13294
DFRobot Gravity - Sensor connection cable for Arduino - 4-pin - I2C/UART - 50cm - 10pcs. - FIT0773
Connection cable equipped with Gravity series connector. Manufactured by DFRobot, it is designed to connect the sensor to the main module - Arduino. It supports two most...
Index: DFR-19549
Index: DFR-19549
DFRobot Gravity - colorful RGB LED module
LED module lights up in the seven colors of the rainbow. The controller randomly chooses the color. Modules may be connected in a cascade, one interface can control all the...
Index: DFR-09382
Index: DFR-09382
DFRobot Gravity DFR0018 - set of 9 modules with cables for Arduino
A set of 9 popular modules compatible with Arduino boards. It has 7 sensors, including: light, temperature, touch, rotation, vibration sensors, and the button and the module...
Index: DFR-03933
Index: DFR-03933
Gravity - TRIG URM09 ultrasonic distance sensor - DFRobot SEN0388
Ultrasonic distance measuring module produced by DFRobot with integrated URM09 chip. It detects objects at a distance from 2 cm to 500 cm . The distance is determined...
Index: DFR-19194
Index: DFR-19194
DFRobot Gravity - DC motor + propeller module
Module with DC motor and built-in transistor, it does not require an additional driver. Control is via PWM signal. It has a connector adapted to DFRobot IO Expansion Shield.
Index: DFR-05965
Index: DFR-05965
DFRobot Gravity - digital pressure sensor 1kg (10N)
Pressure sensor for Arduino works in the range of up to 1 kg. It is based on HX711, it has 24-bit analog-to-digital converter designed to scale weight and control applications...
Index: DFR-11280
Index: DFR-11280
Gravity - ozone sensor I2C - electrochemical - DFRobot SEN0321
Electrochemical ozone sensor for accurate O3 concentration measurement in the environment. Its measuring range is from 0 ppm to 10 ppm. It communicates via the I2C...
Index: DFR-16575
Index: DFR-16575
Gravity - CO2 carbon dioxide sensor - SCD41 - IR - I2C - 400-5000 ppm - DFRobot SEN0536
CO2 carbon dioxide sensor from DFRobot equipped with the SCD41 system from Sensirion . It is based on the photoacoustic NDIR detection principle and Sensirion's patented...
Index: DFR-22673
Index: DFR-22673
DFRobot Gravity StarterKit with DFRduino Uno
Starter set introducing the world of Arduino programming. It allows for the construction of more than a dozen of projects using Arduino and i.a.: servos, LEDs, distance and...
Index: DFR-06291
Index: DFR-06291
DFRobot Gravity - DS18B20 temperature sensor
Digital temperature sensor DS18B20 with the Gravity interface compatible with Arduino. It works in the range from -55 Β°C to 125 Β°C. It is powered with the voltage from 3.3 V...
Index: DFR-11281
Index: DFR-11281
See also
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
